http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

A detailed installation guide for a 2002 2003-2005 Mercedes Benz Vaneo head unit with Bluetooth 3G WiFi Quad-core CPU

490 views

To install a new aftermarket car stereo in your car, it just costs you about half an hour, especially with a correct installation guide, you can more easily install it. If you own a 2002 2003-2005 Mercedes Benz Vaneo, please look at the following picture which is an amazing 2002 2003-2005 Mercedes Benz Vaneo head unit from Seicane after installation. If you also have the same dashboard, you can refer to this detailed 2002 2003-2005 Mercedes Benz Vaneo head unit installation guide for reference.

2002 2003-2005 Mercedes Benz Vaneo head unit

2002 2003-2005 Mercedes Benz Vaneo head unit

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2002 2003-2005 Mercedes Benz Vaneo head unit installation guide

1.The original car radio.

The original car radio

The original car radio

2.Remove your shifter boot.

Remove your shifter boot

Remove your shifter boot

3.Remove the panel.

Remove the panel

Remove the panel

4.Release the plastic tabs, then remove two screws behind the plastic cover.

Release the plastic tabs, then remove two screws behind the plastic cover

Release the plastic tabs, then remove two screws behind the plastic cover

5.Remove the bottom plastic part.

Remove the bottom plastic part

Remove the bottom plastic part

6.Unscrew the screw holding the plastic panel.

Unscrew the screw holding the plastic panel

Unscrew the screw holding the plastic panel

7.Remove the plastic panel.

Remove the plastic panel

Remove the plastic panel

8.Remove the screw at the bottom plastic panel.

Remove the screw at the bottom plastic panel

Remove the screw at the bottom plastic panel

9.Unscrew the screw holding the bottom plastic panel.

Unscrew the screw holding the bottom plastic panel

Unscrew the screw holding the bottom plastic panel

10.Remove the bottom plastic panel.

Remove the bottom plastic panel

Remove the bottom plastic panel

11.Turn the vent panel up.

Turn the vent panel up

Turn the vent panel up

12.Remove the screws holding the vent panel.

Remove the screws holding the vent panel

Remove the screws holding the vent panel

13.Take the vent panel out of the dashboard.

Take the vent panel out of the dashboard

Take the vent panel out of the dashboard

14.Remove the panel covering the car original radio.

Remove the panel covering the car original radio

Remove the panel covering the car original radio

15.Disconnect the connectors at the back of the panel.

Disconnect the connectors at the back of the panel

Disconnect the connectors at the back of the panel

16.Remove the screws holding the original car radio.

Remove the screws holding the original car radio

Remove the screws holding the original car radio

17.Gently take the original car radio out of the dashboard.

Gently take the original car radio out of the dashboard

Gently take the original car radio out of the dashboard

18.Disconnect the connectors at the back of the original car radio.

Disconnect the connectors at the back of the original car radio

Disconnect the connectors at the back of the original car radio

19.Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

20.Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

21.Connect the Seicane head unit to your original car radio ‘s plugs.

22.Put the new Seicane unit into the dash. Then turn on the new Seicane unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

23.Put everything into their original place.

 

Above all, please make clear about every step before you start this 2002 2003-2005 Mercedes Benz Vaneo head unit in your car. If you don’t have any experience before, you can ask a professional for help. For any question, you are welcome to consult your dealer. If you don’t have an ideal unit for your car, you can refer to this amazing 2002 2003-2005 Mercedes Benz Vaneo head unit from Seicane, please click:

http://www.seicane.com/seicane-s127507-2-din-2002-2003-2004-2005-mercedes-benz-vaneo-android-gps-dvd-aftermarket-car-bluetooth-system-with-radio-3g-wifi-cpu-mirror-link-obd2-canbus-backup-camera-s127507

Featuring a number of up-to-date capabilities and entertainment options, this Mercedes Benz Vaneo head unit is desirable for you to upgrade your factory radio. The region-free DVD player enables you to play all the DVDs from every country in the world to add fun for your passengers in the long trip. You can also play other programs from the portable devices via the USB connection.

The bulit-in GPS navigation system can provide turn-by-turn direction and spoken guidance for you to reach your destination. Besides, hands-free calls and streaming music are both available thanks to the bluetooth technology.

Just install this amazing Mercedes Benz Vaneo head unit from Seicane to have a wonderful time!

Related Posts

Posted in Uncategorized.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>