http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

9 simple steps to install a 2002 2003-2008 Dodge Viper head unit with DVD GPS System 3D Navigation Radio RDS TV Tuner IPod USB SD MP3

617 views

Are you a music lover or a radio enthusiast? If yes, then a multifunctional car stereo which can support many features must be popular with you. It can not only refresh you with its various entertainment options but also lead you to your desired destination with the most accurate direction. To install a new stereo in your car, this professional 2002 2003-2008 Dodge Viper head unit installation instruction from Seicane can be much helpful for you.

2002 2003-2008 Dodge Viper head unit after installation

2002 2003-2008 Dodge Viper head unit after installation

 

 

Precautions:

  1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
  2. A lever and a screwdriver need to be prepared before the installation.
  3. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2002 2003-2008 Dodge Viper head unit installation guide

 

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

1.Loosen the trim panel with a lever

 

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

 

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

 

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

 

5.Check all the accessories for the new Seicane unit.

5.Check all the accessories for the new Seicane car radio.

5.Check all the accessories for the new Seicane car radio.

 

6.Connect the Seicane unit to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio 's plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio 's plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-3. Connect the Seicane car stereo to your original car radio 's plugs.

6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.

 

7.Put the new Seicane unit into the dash.

7.Put the new Seicane stereo into the dash.

7.Put the new Seicane stereo into the dash.

 

8.Turn on the new radio and have a test if the new Seicane unit is working without problem..

9.Put trim panel back on your new Seicane unit after the normal test.

 

All in all, if you find the dashboard above is different from yours, you don’t have to worry about that, because the installation is similar on the whole, and it won’t have much influence on the installation. If you encounter any question during the whole process, you are welcome to seek help from your dealer.

 

On the other hand, do you find an ideal unit for your car? If not, you can refer to this intelligent 2002 2003-2008 Dodge Viper head unit from Seicane, which can be compatible with a wide range of features to upgrade your factor y radio, please click for more details:

 

http://www.seicane.com/hd-touch-screen-2002-2008-dodge-stratus-viper-in-dash-dvd-gps-system-3d-navigation-radio-rds-tv-tuner-ipod-usb-sd-mp3-rearview-camera-dual-zone-aux-t6015

 

This advanced Dodge Viper head unit is loaded with a real-time 3D GPS navigation system to provide the lane assist, route planning, 3D street view, landmark display and text-to-speech guidance for you to get to your destination with east. The availability of bluetooth to link with your enabled mobile phone is desirable to have hands-free calls and stream music. Besides, you can connect a rearview camera to this unit to get assistance for easier parking.

 

Just easily find your way to a wide range of locations with this powerful Dodge Viper head unit from now on! Good luck to you!

Related Posts

Posted in Dodge. Tagged with .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>