Monthly Archives: March 2019

Easy-to-understand Installation Tutorial for a 2003-2007 Honda Accord 7 GPS Navigation Bluetooth Car Radio Stereo

If you think your factory radio is not up-to-date enough to be compatible with some modern and new features, why not think about replacing it with a new aftermarket car radio? And if you would like to have a general understanding of the car radio, you can search for a related car radio installation and refer to it. The following is a 2003-2007 Honda Accord 7 car radio installation instruction from Seicane, which might be helpful for you.

2003-2007 Honda Accord 7 GPS Bluetooth DVD Car Radio after installation

2003-2007 Honda Accord 7 GPS Bluetooth DVD Car Radio after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details:http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2003-2007 Honda Accord 7 car radio installation instruction

1. Pry around the side of top trim panel and pop it up then set it aside.

Pry around the side of top trim panel and pop it up then set it aside

Pry around the side of top trim panel and pop it up then set it aside

2. Remove trim pieces of the shifter with a lever.

Remove trim pieces of the shifter with a lever

Remove trim pieces of the shifter with a lever

3. Open up the coil train ,Gently pry around the corner and take the inserts out.

Open up the coil train ,Gently pry around the corner and take the inserts out

Open up the coil train ,Gently pry around the corner and take the inserts out

4. Remove 2 screws to take the assembly out.

Remove 2 screws to take the assembly out

Remove 2 screws to take the assembly out

5. Gently pop it up and take out the package.

Gently pop it up and take out the package

Gently pop it up and take out the package

6. Disconnect the smaller harness on the behind of the assembly.

Disconnect the smaller harness on the behind of the assembly

Disconnect the smaller harness on the behind of the assembly

7. unscrew another 2 screws to pop the storage box out.

unscrew another 2 screws to pop the storage box out

unscrew another 2 screws to pop the storage box out

8. Take out the 3 screws on the top and 2 screws on the bottom.

Take out the 3 screws on the top and 2 screws on the bottom

Take out the 3 screws on the top and 2 screws on the bottom

9. Take out the radio unit with a lever.

Take out the radio unit with a lever

Take out the radio unit with a lever

10. Disconnect the wiring behind the factory radio unit.

Disconnect the wiring behind the factory radio unit

Disconnect the wiring behind the factory radio unit

11. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

12. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

13. Connect the Seicane car radio to your original car radio’s plugs.

14. Install screws and trim panel.

15. Install the trim piece.

16. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

 

So now do you have a general understanding of the installation on a 2003-2007 Honda Accord 7 car radio? If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. As for the selection of a suitable car radio, you can refer to a remarkable 2003-2007 Honda Accord 7 car radio from Seicane. For more details, please click:

https://www.seicane.com/hd-touchscreen-android-aftermarket-gps-navigation-radio-for-2003-2007-honda-accord-7-with-bluetooth-phone-aux-fm-steering-wheel-control-support-dvd-1080p-video-obd2-h719

This car radio is running on the advanced and stable Android 6.0 operation system and a quad-core Cortex A53 CPU processor with multi-touch screen supporting high resolution. you will have a much smoother, faster and easier operation experience with this stereo navigation system .

Built in GPS module, this car radio unit is loaded with worldwide location information, helping you to identify the way and not get lost anymore. Additionally , it also can show the landmark building ,3d street view, current location, speed etc for your information.

This car radio comes with a blue chip inside, supporting interactive function with other device by Bluetooth connection. Take hands-free call and music streaming as example, you can dial, answer or mute or switching music without taking your hands off the steering wheel. In a word, it provides the most stereo joy under safe driving guarantee.

Among the wide range of entertainment features, the 4G/WIFI, FM/AM radio, Bluetooth AUX, file management, etc also have the great use and attraction in practical life.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

How to Easily Install and Upgrade a GPS Navigation Car Audio Radio for 2018 Nissan NAVARA Terra

As reported, we spend nearly 30% lifetime in car, such as traveling, commuting and so on. More and more people pay attention to the facility in car , especially the stereo system,which plays the important role in the entertainment system of the car. How to remove and replace the factory cassette radio with the on you like by yourself? Today we will share you the detailed guidance on

2018 Nissan NAVARA Terra car radio installation from Seicane, helping you to have a general understanding of the new car radio. If you have the same or similar dashboard, you can refer to the following instruction.

2018 Nissan NAVARA Terra car radio after installation

2018 Nissan NAVARA Terra car radio after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2018 Nissan NAVARA Terra car radio installation instruction

1. Remove the trim pieces above cup holder with a lever.

Remove the trim pieces above cup holder with a lever

Remove the trim pieces above cup holder with a lever

2. Remove 4 bolts behind the trim piece.

Remove 4 bolts behind the trim piece

Remove 4 bolts behind the trim piece

 

 

 

3. Gently pry around the side of trim panel and then remove the upper trim panel.

Gently pry around the side of trim panel and then remove the upper trim panel

Gently pry around the side of trim panel and then remove the upper trim panel

 

 

4. Gently pry around the side of bottom trim panel and take out the original radio.

Gently pry around the side of bottom trim panel and take out the original radio

Gently pry around the side of bottom trim panel and take out the original radio

 

 

5. Disconnect the smaller harness on the behind of the original car radio.

Disconnect the smaller harness on the behind of the original car radio

Disconnect the smaller harness on the behind of the original car radio

 

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

 

 

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

 

 

8. Connect the Seicane car radio to your original car radio’s plugs.

9. Install four screws and trim panel.

10. Install the trim piece.

11. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

 

Before installation, please make clear every detailed specific step and your car mode and related compatible replacement radio system. If you have any doubts, please don’t hesitate to consult your dealer for seeking valuable advice. If you are still searching for an ideal car radio, here I would like to share a remarkable Seicane HD Touchscreen 9.7 inch Android 6.0 Radio Navigation System for 2018 Nissan NAVARA Terra with you. For more details, please click:

 

https://www.seicane.com/oem-hd-touchscreen-radio-for-2018-nissan-navara-terra-with-gps-navi-system-mirror-link-bluetooth-music-wifi-support-3g-obd2-dvr-swc-h755

 

With advanced configuration of intelligent Android6.0 operation system, high quality Quad Core A53 1.5GHz processor, 32GB Nand Flash, the unit is made to be the high performance operation system. Built in GPS module with dual zone function, the stereo unit can offer worldwide real-time navigational guidance and perform parallel background task such as displaying music/radio. Bluetooth chips built inside as well makes it support Bluetooth hands-free call, and Bluetooth streaming music playing from phone. Its phonebook function means you can search for contacts on screen of head unit directly. Besides, you are allowed to surfing such as Google searching, watching video or downloading data by connecting any Wi-Fi hot spot or in range of 3G internet with 4G/WIFI module inside .

Additionally, it also supports DVR, DVD or OBDII as an option function.

Want more details or any question, feel free to come to us!

Posted in Uncategorized. Tagged with .

How to install and upgrade a 2013 2014 2015 2016 BMW 2 Series F22/F45 MPV NBT Bluetooth GPS Sat Nav Car Radio

When you drive your car out for a self-driving travel with your families or friends, you must want to play some music, TV programs or movies to make all of you relaxed on the way. Under this circumstance, it is essential for you to install a multifunctional head unit with entertainment features which can add a lot of fun to your long tedious trip. The following is a 2013 2014 2015 2016 BMW 2 Series F22/F45 MPV NBT car radio installation guide from Seicane with you. If you have the same or similar dashboard, you can take it as a reference.

2013 2014 2015 2016 BMW 2 Series F22 F45 MPV NBT car radio after installation

2013 2014 2015 2016 BMW 2 Series F22 F45 MPV NBT car radio after installation

Before and during installation, you should notice:

1. Before connecting,please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire,so when replace the fuse, please consult the professional.

7. For your convenience, here’s there commended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2013 2014 2015 2016 BMW 2 Series F22/F45 MPV NBT car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Use a pry tool to loose the air vent and then remove the air vent.

Use a pry tool to loose the air vent and then remove the air vent

Use a pry tool to loose the air vent and then remove the air vent

3. Unplug the connectors at the back of the air vent.

Unplug the connectors at the back of the air vent

Unplug the connectors at the back of the air vent

4. Use a screwdriver to remove the screws that fix the radio panel.

Use a screwdriver to remove the screws that fix the radio panel

Use a screwdriver to remove the screws that fix the radio panel

5. Take out the panel.

Take out the panel

Take out the panel

6. Disconnect the connectors at the back of the panel.

Disconnect the connectors at the back of the panel

Disconnect the connectors at the back of the panel

7. Use a screwdriver to remove the screws of the radio and then pull out the original car radio.

Use a screwdriver to remove the screws of the radio and then pull out the original car radio

Use a screwdriver to remove the screws of the radio and then pull out the original car radio

8. Unplug the connectors or cables at the back of the car radio.

Unplug the connectors or cables at the back of the car radio

Unplug the connectors or cables at the back of the car radio

9. Remove the two screws that fix the display and then remove the display.

Remove the two screws that fix the display and then remove the display

Remove the two screws that fix the display and then remove the display

10. Check all the accessories for the new Seicane car radio.

11. Connect the harnesses to the back of the new Seicane car radio.

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

Now can you understand all the steps mentioned and learn some skills to help install your new car radio all by yourself? If you still have any doubts, you can contact your dealer, communicate with someone experienced or turn to a professional for help. And moreover, you can directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio for your beloved car. Here I would like to share a remarkable 2013 2014 2015 2016 BMW 2 Series F22/F45 MPV NBT car radio from Seicane with you. For more details, please click:

https://www.seicane.com/hd-touchscreen-android-2013-2016-bmw-2-series-f22-f45-mpv-nbt-car-stereo-radio-head-unit-gps-navigation-bluetooth-phone-mp3-support-steering-wheel-control-wifi-backup-camera-s028202

This car radio is running with the stable Android operation system and powerful CPU processor, which will enables you to embrace a much smoother, faster and easier operation experience. Since this car radio comes with a wide range of practical and entertainment features, almost all your different needs can be met in your beloved car. These comprehensive features are mainly including high-end 3D GPS navigation system, Bluetooth hands-free calls, Bluetooth music,FM/ AM radio tuner, USB & SD connection, etc. What’s more, apart from these features, there are also some optional functions being supported to be added to this unit according to your preference, such as car DVR, backup camera, OBD2, CarPlay dongle and so on forth. As long as you make full advantage of these modern features, you are able to improve both your in-car environment and gain a brand new driving experience.

Wish you have a wonderful driving experience accompanied by this amazing car radio.

Posted in Uncategorized. Tagged with .

How to Install and Upgrade a 2009 2010 2011 2012-2015 BMW X1 E84 GPS Navigation Bluetooth Mirror Link Audio System

As a car owner, you must want to create a convenient and relaxing in-car environment and own a wonderful driving experience. To achieve this goal, you can install a new multifunctional car radio to replace your factory radio which is incompatible with a range of modern features. Here I would like to introduce a detailed Seicane car radio installation guide for a 2009 2010 2011 2012-2015 BMW X1 E84 car radio with you. If you have the same or similar dashboard, you can refer to this guide carefully.

2009 2010 2011 2012-2015 BMW X1 E84 Car Stereo after installation

2009 2010 2011 2012-2015 BMW X1 E84 Car Stereo after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s there commended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2009 2010 2011 2012-2015 BMW X1 E84 car radio installation guide

1. Use a plastic removal tool to pry the air-conditioning vent panel.

Use a plastic removal tool to pry the air-conditioning vent panel

Use a plastic removal tool to pry the air-conditioning vent panel

2. Gently remove the hazard button.

Gently remove the hazard button

Gently remove the hazard button

3. After remove the screws that fix the top panel, gently take out this panel.

After remove the screws that fix the top panel, gently take out this panel

After remove the screws that fix the top panel, gently take out this panel

4. Use the removal tool to pop out the panel beside the gear shift.

Use the removal tool to pop out the panel beside the gear shift

Use the removal tool to pop out the panel beside the gear shift

5. Remove the air-conditioning panel with the help of the removal tool.

Remove the air-conditioning panel with the help of the removal tool

Remove the air-conditioning panel with the help of the removal tool

6. Disconnect the connectors and plugs at the back of the climate control panel.

Disconnect the connectors and plugs at the back of the climate control panel

Disconnect the connectors and plugs at the back of the climate control panel

7. Unscrew the screws that fix the original car radio with a screwdriver.

Unscrew the screws that fix the original car radio with a screwdriver

Unscrew the screws that fix the original car radio with a screwdriver

8. Pull out the original car radio.

Pull out the original car radio

Pull out the original car radio

9. Unplug the connectors and cables at the back of the car radio.

Unplug the connectors and cables at the back of the car radio

Unplug the connectors and cables at the back of the car radio

10. Check all the accessories for the new Seicane car radio.

11. Connect the harnesses to the back of the new Seicane car radio.

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

Wish you can achieve the whole removal and installation process after reading the above instruction. If you have any difficulties that you do not know how to overcome, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Anyway, before installation, please make sure that you’ve already got an ideal car radio for your beloved car. If you don’t have, here I would like to share a remarkable 2009 2010 2011 2012-2015 BMW X1 E84 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/hd-touchscreen-android-2009-2015-bmw-x1-e84-with-monitor-cic-aftermarket-radio-head-unit-car-stereo-gps-navigation-system-bluetooth-phone-support-wifi-dvr-steering-wheel-control-s028239

Your driving experience will be improved to a large extent if you install this car radio in your car. This car radio can offer you the best service due to its higher configuration and performance.

With the assistance of the worldwide real-time GPS navigation system, you can easily locate where you are currently and get the optimal route option to reach any locations you would like to go to according to the turn-by-turn directions and voice prompts. And this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

Additionally, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can freely get access to Bluetooth hands-free phone calls as well as Bluetooth streaming music without taking your hands off the steering wheel control. Thanks to this function, you will gain a lot of convenience and entertainment.

Wish you like this unit. Good luck to you!

Posted in Uncategorized. Tagged with .