Monthly Archives: January 2019

Quick Install and Upgrade Tutorial for a 2015 Nissan Murano GPS Navigation Bluetooth USB WIFI Car Radio

For car owners who are looking forward to pursuing more comfortable, convenient an relaxing in-car life, it is suggested that they can think about removing their factory car radio and installing a new car radio which can support a lot of upgraded and brand new features. As an owner of 2015 Nissan Murano, if you would like to install a new aftermarket car radio to replace your factory radio by yourself, you can refer to the following 2015 Nissan Murano car radio installation instruction from Seicane. Wish it is helpful for you.

2015 Nissan Murano Car Radio after installation

2015 Nissan Murano Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2015 Nissan Murano car radio installation instruction

1. Take out the decoration bar with pry tools, better to put some tapes on both panels.

Take out the decoration bar with pry tools, better to put some tapes on both panels

Take out the decoration bar with pry tools, better to put some tapes on both panels

2. Take out the air condition consoler.

Take out the air condition consoler

Take out the air condition consoler

3. Remove the dash cover.

Remove the dash cover

Remove the dash cover

4. Take out the screws fixed on the original stereo.

Take out the screws fixed on the original stereo

Take out the screws fixed on the original stereo

5. Gently take out the original car stereo.

Gently take out the original car stereo

Gently take out the original car stereo

6. Disconnect the connectors and cables at the back of the stereo.

Disconnect the connectors and cables at the back of the stereo

Disconnect the connectors and cables at the back of the stereo

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

9. Connect the Seicane car stereo to your original stereo’s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place. All the installation is done.

 

Don’t worry if you cannot totally understanding the above steps. You can contact your dealer for seeking for a wiring diagram, communicate with someone experienced or ask for a professional for help. Or you can browse some related professional websites. Besides, to help you choose an ideal car radio for 2015 Nissan Murano, here I would like to share an amazing 2015 Nissan Murano car radio from Seicane with you. For more details, please click:

https://www.seicane.com/inch-hd-touchscreen-2015-nissan-murano-gps-navigation-system-with-obdii-rear-camera-aux-steering-wheel-control-usb-1080p-3g-wifi-capacitive-mirror-link-tpms-dvr-bluetooth-s089693f

With this car radio installed in your car, you will be able to take great advantage of both practical and entertainment features.

Under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system of high accuracy, this unit enables you to easily locate where you are currently and help you find the right way to get to reach any locations you would like to go to. Besides, this unit comes with dual zone function, so you can also freely listen to your favorite music while navigating.

Additionally, through the Bluetooth connection between the Bluetooth-enabled mobile phone and this car radio, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you, which can bring you a lot of convenience and enjoyment.

While for the entertainment features, you can add a one din DVD player to this car radio so as to play your favorite music, TV programs, movies and so on.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

Quick Way Reove and Install Tutorial for a 2012 Honda Civic GPS Navigation Bluetooth Mirror Link Radio Unit

An ideal car radio should be compatible with both practical and entertainment features, so it can bring you great convenience and entertainment. If you think your car radio’s functions are too limited, you might as well consider replacing your factory radio with a brand new car radio. This article aims to introduce the installation steps of a 2012 Honda Civic car radio from Seicane. If you own the same or similar dashboard, you can refer to these steps carefully.

2012 Honda Civic car radio after installation

2012 Honda Civic car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2012 Honda civic (LHD) car radio installation instruction

1. Remove the automotive oil table top panel with plastic knife.

Remove the automotive oil table top panel with plastic knife

Remove the automotive oil table top panel with plastic knife

2. Remove the screws under the original car CD.

Remove the screws under the original car CD

Remove the screws under the original car CD

3. Take the original radio out of the dash.

Take the original radio out of the dash

Take the original radio out of the dash

4. Pull the plugs at the back of the original radio.

Pull the plugs at the back of the original radio

Pull the plugs at the back of the original radio

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original car radio’s plugs.

8. Put the new Seicane car radio into the dash.

9. Turn on the new Seicane car radio and check whether the unit is working properly. If not, please check whether all the cables are connected correctly.

10. Install screws and the panel, and put everything into their original place.

 

So now do you have a general understanding of the whole removal and installation steps of a car radio? If you still think it hard to install such a car radio by yourself, it is sincerely suggested that you should seek help from your dealer, someone experienced or a professional. Or you can straightly go to a car radio upgrade center and make the new car radio installed by a professional technician. Additionally, if you are still looking for a suitable car radio but have no ideas, here I would like to share a remarkable 2012 Honda Civic car radio from Seicane with you. For more details, please click:

https://www.seicane.com/seicane-s128201-android-radio-gps-car-audio-system-for-2012-honda-civic-with-cd-dvd-player-bluetooth-music-3g-wifi-mirror-link-obd2-hd-multi-touch-capacitive-screen

This car radio is running on the stable Android 6.0 operation system and a powerful quad-core CPU processor to enhance its capabilities and performance.

With this car radio installed in your car, you will be able to get access to a lot of practical and entertainment features, which can greatly improve your in-car life.

As for the 3D GPS navigation function, what you cannot ignore is that with its help, you can easily know your current locations and accurately find the right way to arrive at any locations you would like to go to according to turn-by-turn directions and voice prompts. And this unit comes with dual zone function, which allows you to listen to your favorite music while navigating.

Through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you can freely dial, answer, reject and mute Bluetooth hands-free phone calls as well as Bluetooth streaming music from your phone.

If you like this unit, just don’t hesitate to add it to your shopping cart. Good luck!

Posted in Uncategorized. Tagged with .

How to Install and Upgrade 2008 2009 2010 2011-2015 Mitsubishi Lancer-ex GPS Navigation Bluetooth USB Car Radio

If you would like to remove your factory radio and install a new car radio, what you need to do is to find out what features you need. And if your factory radio cannot be compatible with these features you are eager to, you can think about replacing your factory radio with a new aftermarket car radio. The following is a detailed 2008 2009 2010 2011-2015 Mitsubishi Lancer-ex car radio installation instruction from Seicane. If you also own the same or similar dashboard, you can refer to this instruction.

2008 2009 2010 2011 2012-2015 Mitsubishi Lancer-ex car radio after installation

2008 2009 2010 2011 2012-2015 Mitsubishi Lancer-ex car radio after installation

Here are four tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2008 2009 2010 2011-2015 Mitsubishi Lancer-ex car radio installation instruction

1. Before installation, please remove any CDs from the head unit, and then disconnect the negative from your battery.

Before installation, please remove any CDs from the head unit, and then disconnect the negative from your battery

Before installation, please remove any CDs from the head unit, and then disconnect the negative from your battery

2. Remove trim pieces to access original car radio as follows.

Remove trim pieces to access original car radio as follows

Remove trim pieces to access original car radio as follows

3. Remove hazard warning accessory.

Remove hazard warning accessory

Remove hazard warning accessory

4. Disconnect Ribbon Harness and wiring loom.

5. Remove car radio fascia, please gently and carefully pull upwards from left hand corner.

Remove car radio fascia, please gently and carefully pull upwards from left hand corner

Remove car radio fascia, please gently and carefully pull upwards from left hand corner

6. Remove the four screws that are holding the original car radio in place.

Remove the four screws that are holding the original car radio in place

Remove the four screws that are holding the original car radio in place

7. Gently take out the original car radio.

Gently take out the original car radio

Gently take out the original car radio

8. Remove theoriginal car radio’s wiring harness and antenna from the back of the car radio.

9. Remove the factory mounting brackets and install them on the new car radio.

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your originalradio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

Wish you can learn something useful from the above installation instruction. If you encounter any difficulties and don’t know how to overcome them, you can seek for advice from your dealer or a professional. Or during the installation, you can contact your dealer, communicate with someone experienced or turn to a professional technician. Anyway, before installation, it is essential for you to select an ideal car radio for your beloved car radio. If you have no ideas, you can refer to the following link which is a remarkable 2008 2009 2010 2011-2015 Mitsubishi Lancer-ex car radio from Seicane.

https://www.seicane.com/android-2008-2015-mitsubishi-lancer-ex-hd-touchscreen-gps-navigation-radio-with-fm-bluetooth-wifi-usb-1080p-video-mirror-link-obd2-rearview-camera-s04117

With this car radio installed in your car, you will freely get access to a wide range of practical and entertainment features, such as GPS navigation function, FM/AM radio, Bluetooth hands-free phone calls, Bluetooth streaming music, AUX function, file management, etc. Thus, this all-in-one car radio from Seicane can be taken as one of the most suitable replacements for your factory radio.

Under the guidance of turn-by-turn directions and voice prompts provided by the high-accuracy 3D GPS navigation system, you can easily know your current locations and find the right way to reach your desired destinations even you are driving around an unfamiliar place. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Through Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, Bluetooth hands-free phone calls and Bluetooth streaming music are both available for you, which can give you great convenience and enjoyment.

Wish you like this unit and good luck!

Posted in Uncategorized. Tagged with .

How to Upgrade and Install a 2009 2010 2011 2012-2016 NISSAN NV200 Bluetooth Radio GPS Navigation Car Stereo Head Unit

If your factory radio is too out-dated, in my opinion, it is wise of you to replace your factory radio with a brand new multifunctional car radio so that you can enjoy more convenience and enjoyment as well as embrace a brand new driving experience. The following is a 2009 2010 2011 2012-2016 NISSAN NV200 car radio installation instruction from Seicane which I would like to share with you. If you own the same or similar dashboard, you’d better refer to this instruction.

2009 2010 2011 2012-2016 NISSAN NV200 car radio after installation

2009 2010 2011 2012-2016 NISSAN NV200 car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2009 2010 2011 2012-2016 NISSAN NV200 car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Grab the ashtray and take it out.

Grab the ashtray and take it out

Grab the ashtray and take it out

3. Remove the metal platefrom the bottom.

Remove the metal platefrom the bottom

Remove the metal platefrom the bottom

4. Release this panel.

Release this panel

Release this panel

5. Push the button upwards to unsnap it.

Push the button upwards to unsnap it

Push the button upwards to unsnap it

6. Take out this panel softly.

Take out this panel softly

Take out this panel softly

7. Unscrew two screws fixed the radio frame.

Unscrew two screws fixed the radio frame

Unscrew two screws fixed the radio frame

8. Get your nails underneath to click off the radio frame.

Get your nails underneath to click off the radio frame

Get your nails underneath to click off the radio frame

8-1

8-1

9. Unscrew the screws holding the radio on the dashboard.

Unscrew the screws holding the radio on the dashboard

Unscrew the screws holding the radio on the dashboard

10. Take out the original car stereo and disconnect the connectors at the back of the stereo.

11. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

12. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

13. Connect the Seicane car stereo to your original stereo’s plugs.

14. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

15. Put the new Seicane car stereo into the dash.

16. Put everything into their original place. All the installation is done.

 

Wish the above installation steps can be helpful for you. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard to install the new car radio by yourself, you can directly ask a professional technician to help you with the installation. Besides, it is very essential for you to pick an ideal car radio. If you have no ideas, you can check out the following link which is an amazing 2009 2010 2011 2012-2016 NISSAN NV200 car radio from Seicane.

https://www.seicane.com/android-hd-touchscreen-radio-for-2009-2016-nissan-nv200-gps-navigation-car-stereo-bluetooth-support-mirror-link-obd2-aux-3g-wifi-dvr-1080p-video-steering-wheel-control-s04109e

This car radio is loaded with the new and stable Android 6.0 operation system and a powerful quad-core CPU processor to strengthen its capabilities, performance and enjoyment. And this unit comes with a lot of practical and entertainment features to meet your different needs in car.

Even though you don’t have a good sense of directions, under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you can easily know your current locations and find the right way to reach any locations you would like to go to. What’s more, thanks to this unit’s dual zone function, you can freely listen to car radio, USB or SD card music playback under GPS mode.

Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, you can connect your Bluetooth-enabled mobile phone to this car radio, so you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from phone music playlists.

Wish you like this unit and good luck to you.

Posted in Uncategorized.