Daily Archives: October 12, 2018

Best way to Remove and Install a 2016 Jeep Renegade GPS Navigation Bluetooth Touch Screen Car Radio

If you are fed up with your factory radio, why not remove it and install a new multifunctional one? Since nowadays most car radios are plug and play, it is not very difficult to install the new car radio. This article will mainly introduce how to remove and install the new car radio for 2016 Jeep Renegade. If you own the same or similar dashboard and would like to upgrade your in-car life,  you can carefully read the following installation steps.

2016 Jeep Renegade car radio after installation

2016 Jeep Renegade car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2016 Jeep Renegade car radio installation guide

1. Start by removing the car radio trim panel using a flat pry tool.

Start by removing the car radio trim panel using a flat pry tool

Start by removing the car radio trim panel using a flat pry tool

1-1

1-1

2. Use a screwdriver to remove screws that are holding the radio on the dashboard.

Use a screwdriver to remove screws that are holding the radio on the dashboard

Use a screwdriver to remove screws that are holding the radio on the dashboard

3. Gently pull the original radio out from the dash.

Gently pull the original radio out from the dash

Gently pull the original radio out from the dash

4. Disconnect all the connectors and cables at the back of the radio.

Disconnect all the connectors and cables at the back of the radio

Disconnect all the connectors and cables at the back of the radio

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original radio’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for you. If you are not very clear about every steps before installation, it is suggested that you should consult your dealer, communicate with someone experienced or turn to a professional for help. What’s more, it is necessary for you to pick an ideal car radio for your beloved car. If you have no idea that which kind of car radio can fit your car, you can refer to the following link which is a remarkable 2016 Jeep Renegade car radio from Seicane. For more details, please click:

https://www.seicane.com/2016-jeep-renegade-touchscreen-android-radio-gps-navigation-system-with-usb-bluetooth-wifi-1080p-aux-mirror-link-steering-wheel-control-s04131

This car radio is running on the stable Android 6.0 operation system and a powerful quad-core CPU processor, so it has strong capabilities and performance to be regarded as one of your best choices to replace your factory radio.

Even you don’t have a good sense of directions, you won’t get lost when you travel around an unfamiliar place. Under the guidance of the turn-by-turn directions and voice prompts, you are able to easily know your current locations and navigate to your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Additionally, thanks to the wireless Bluetooth technology, without taking your hands off the steering wheel, you can dial, answer, reject and mute hands-free phone calls as well as enjoy your favorite music streaming from your phone music playlists with the synchronization between your Bluetooth-enabled mobile phone and this car radio.

Wish you like this unit. Good luck!

Posted in Uncategorized. Tagged with .