Monthly Archives: October 2018

How to Replace a 2016 Nissan Qashqai Bluetooth GPS Car Stereo with HD Multi-touch Screen DVR Steering Wheel Control

Are you eager to upgrade your factory radio with a brand new multifunctional car radio by yourself? If yes, you can try to remove your original factory radio and install a new car radio under the correct installation guide. The following is a 2016 Nissan Qashqai car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide carefully.

2016 Nissan Qashqai Bluetooth GPS Car Stereo after installation

2016 Nissan Qashqai Bluetooth GPS Car Stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2016 Nissan Qashqai car radio installation steps

1. Use a plastic removal tool to remove the panels near the radio.

Use a plastic removal tool to remove the panels near the radio

Use a plastic removal tool to remove the panels near the radio

1-1

1-1

1-2

1-2

2. Remove the air condition climate panel.

Remove the air condition climate panel

Remove the air condition climate panel

2-1

2-1

2-2

2-2

3. Unscrew the screws holding the radio with a screwdriver.

Unscrew the screws holding the radio with a screwdriver

Unscrew the screws holding the radio with a screwdriver

4. Gently take out the originalcar radio.

5. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio

Disconnect the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original stereo’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can give you some help. If you come across any problems, you can seek help from your dealer, communicate with someone experienced or turn to a professional for help. Additionally, if you are afraid of making damage to either your car radio or your car, you can straightly go to a car radio upgrade center and arrange a professional technician to help you. While for the selection of an idea car radio, if you have no ideas, here I would like to share an amazing 2016 Nissan Qashqai car radio from Seicane with you. For more details, please click:

https://www.seicane.com/2016-nissan-qashqai-android-radio-gps-navigation-support-bluetooth-usb-wifi-1080p-video-mirror-link-dvr-rearview-camera-s04107

This amazing car radio can be regarded as one of the best road companion for you since it is running on the stable Android 6.0 operation system and a powerful quad-core CPU.

With the assistance of the worldwide real-time GPS navigation system, you can easily know where you are currently and find the optimal route option to get to your desired destinations under the guidance of the turn-by-turn directions and voice prompts. Besides, this unit comes with dual zone function, which allows you to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

Additionally, under the wireless Bluetooth technology, you are able to dial, answer, reject and mute Bluetooth hands-free phone calls and listen to Bluetooth streaming music from your phone playlists. Therefore, you can gain a lot of convenience and enjoyment during driving.

What are you waiting for? If you like this unit, just don’t hesitate to add this unit to your shopping cart.

Posted in Uncategorized. Tagged with .

Top Remove and Upgrade for a 2004 2005 2006 2007-2011 Ford Focus Exi MT Bluetooth GPS Navigation Mirror Link Car Radio

Do not overestimate the complexity of the removal and installation on a car radio even you don’t have a general understanding at all. Actually, the car radio installation doesn’t require too much expertise so that you can also finish the whole installation process with a correct instruction and some related experience. The following is a detailed 2004 2005 2006 2007-2011 Ford Focus Exi MT car radio installation instruction from Seicane on a car radio. If you own the same or similar dashboard, you can refer to this car radio carefully.

2004 2005 2006 2007-2011 Ford Focus Exi MT Car Radio after installation

2004 2005 2006 2007-2011 Ford Focus Exi MT Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screw driver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s there commended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2004 2005 2006 2007-2011 Ford Focus Exi MT car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated.

Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated

Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated

2-1

2-1

3. Use a Philips screwdriver to unscrew the four self-tapping screws.

Use a Philips screwdriver to unscrew the four self-tapping screws

Use a Philips screwdriver to unscrew the four self-tapping screws

3-1

3-1

4. Gently remove the original car radio out of the dash.

Gently remove the original car radio out of the dash

Gently remove the original car radio out of the dash

5. Disconnect the antenna and connectors at the back of the original car radio.

Disconnect the antenna and connectors at the back of the original car radio

Disconnect the antenna and connectors at the back of the original car radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original car radio’s plugs.

9. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. If the new Seicane car radio works well, put it into the dash.

11. Put everything into their original place, and all the installation is done.

 

Wish the above installation steps can be helpful for you. If you meet any problems that you cannot solve by yourself, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to install the new car radio, you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to pick an ideal car radio for your beloved car. If you have no ideas, you can refer to the following link which is a remarkable 2004 2005 2006 2007-2011 Ford Focus Exi MT car radio from Seicane. For more details, please click:

https://www.seicane.com/android-2004-2011-ford-focus-exi-mt-touchscreen-radio-gps-navi-with-usb-wifi-bluetooth-music-audio-system-1080p-video-mirror-link-dvr-obd2-s0473

This great car radio is running on the stable Android 6.0 operation system and a powerful quad-core CPU processor to strengthen its capabilities and performance. Therefore, with this car radio installed in your car, you can enjoy much smoother, faster and easier operation experience.

Thanks to this unit’s worldwide real-time GPS navigation system of high accuracy, you can easily locate where you are and get the optimal route option to reach your desired destinations according to turn-by-turn directions and voice prompts. Besides, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your mobile phone music playlists. If you like this car radio, just don’t hesitate to add it to your shopping cart.

Wish you enjoy your driving accompanied by this car radio. Good luck!

Posted in Uncategorized. Tagged with .

Best way to Remove and Install a 2016 Jeep Renegade GPS Navigation Bluetooth Touch Screen Car Radio

If you are fed up with your factory radio, why not remove it and install a new multifunctional one? Since nowadays most car radios are plug and play, it is not very difficult to install the new car radio. This article will mainly introduce how to remove and install the new car radio for 2016 Jeep Renegade. If you own the same or similar dashboard and would like to upgrade your in-car life,  you can carefully read the following installation steps.

2016 Jeep Renegade car radio after installation

2016 Jeep Renegade car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2016 Jeep Renegade car radio installation guide

1. Start by removing the car radio trim panel using a flat pry tool.

Start by removing the car radio trim panel using a flat pry tool

Start by removing the car radio trim panel using a flat pry tool

1-1

1-1

2. Use a screwdriver to remove screws that are holding the radio on the dashboard.

Use a screwdriver to remove screws that are holding the radio on the dashboard

Use a screwdriver to remove screws that are holding the radio on the dashboard

3. Gently pull the original radio out from the dash.

Gently pull the original radio out from the dash

Gently pull the original radio out from the dash

4. Disconnect all the connectors and cables at the back of the radio.

Disconnect all the connectors and cables at the back of the radio

Disconnect all the connectors and cables at the back of the radio

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original radio’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for you. If you are not very clear about every steps before installation, it is suggested that you should consult your dealer, communicate with someone experienced or turn to a professional for help. What’s more, it is necessary for you to pick an ideal car radio for your beloved car. If you have no idea that which kind of car radio can fit your car, you can refer to the following link which is a remarkable 2016 Jeep Renegade car radio from Seicane. For more details, please click:

https://www.seicane.com/2016-jeep-renegade-touchscreen-android-radio-gps-navigation-system-with-usb-bluetooth-wifi-1080p-aux-mirror-link-steering-wheel-control-s04131

This car radio is running on the stable Android 6.0 operation system and a powerful quad-core CPU processor, so it has strong capabilities and performance to be regarded as one of your best choices to replace your factory radio.

Even you don’t have a good sense of directions, you won’t get lost when you travel around an unfamiliar place. Under the guidance of the turn-by-turn directions and voice prompts, you are able to easily know your current locations and navigate to your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Additionally, thanks to the wireless Bluetooth technology, without taking your hands off the steering wheel, you can dial, answer, reject and mute hands-free phone calls as well as enjoy your favorite music streaming from your phone music playlists with the synchronization between your Bluetooth-enabled mobile phone and this car radio.

Wish you like this unit. Good luck!

Posted in Uncategorized. Tagged with .

Quick Install and Upgrade Tutorial for a 2014 2015 Toyota Highlander Car Stereo Bluetooth GPS Navigation Radio

To enjoy more convenience and enjoyment in car, it is wise of you to think about removing your factory radio and installing a new aftermarket car radio. The following is a 2014 2015 Toyota Highlander car radio installation instruction from Seicane. If you own the same or similar dashboard and would like to upgrade your factory radio, you can refer to the instruction carefully. Wish you can learn something useful from it.

2014 2015 Toyota Highlander car radio after installation

2014 2015 Toyota Highlander car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2014 2015 Toyota Highlander car radio installation instruction

1. Carefully pry lower dash panel out.

Carefully pry lower dash panel out

Carefully pry lower dash panel out

1-1

1-1

2. Grip onto the A/C control panel, and give it quick tug to remove.

Grip onto the A/C control panel, and give it quick tug to remove

Grip onto the A/C control panel, and give it quick tug to remove

3. Gently pry out air vent and bazel above the radio.

Gently pry out air vent and bazel above the radio

Gently pry out air vent and bazel above the radio

4. There are four 10mm bolts to be removed.

There are four 10mm bolts to be removed

There are four 10mm bolts to be removed

5. Remove these four 10mm bolts with a screwdriver.

Remove these four 10mm bolts with a screwdriver

Remove these four 10mm bolts with a screwdriver

6. Gently pull the radio out of the dashboard.

Gently pull the radio out of the dashboard

Gently pull the radio out of the dashboard

7. Disconnect the connectors and cables at the back of the radio.

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place.

 

Wish the above installation instruction can be helpful for you to some degree. If you have any problems, you can contact your dealer, communicate with someone experienced or ask a professional for help. If you still think it hard to finish the whole installation process on your own, you can directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. Besides, if you don’t know how to select an ideal car radio for your car, here I would like to recommend an amazing 2014 2015 Toyota Highlander car radio from Seicane to you. For more details, please click:

https://www.seicane.com/seicane-s121061-10-1-inch-android-in-dash-bluetooth-gps-navigation-system-for-2014-2015-toyota-highlander-with-hd-1024-600-touch-screen-3g-wifi-radio-rds-mirror-link-obd2-rearview-camera-aux-usb-sd-steering-wheel-control-quad-core-cpu-s121061

This powerful car radio is running on the stable Android 6.0 operation system and a high-quality quad-core CPU processor.

Even though you are not good at identifying directions, under the guidance of turn-by-turn directions and voice prompts provided by the high-accuracy 3D GPS navigation system, you are able to easily locate where you are and navigate to any locations you would like to go to. Besides, this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you to gain a lot of convenience and enjoyment as long as you connect your Bluetooth-enabled mobile phone to this car radio.

Wish you like this multifunctional car radio and good luck to you!

Posted in Uncategorized. Tagged with .