Monthly Archives: September 2018

The Best Way to Upgrade a 2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6 GPS DVD Car Stereo with Bluetooth Navigation Function

First of all, please look at the following picture. It is a 2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6 car radio after installation, which looks amazing, doesn’t it? Here I would like to introduce how to remove the factory radio and install the new car radio for 2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6. If you own the same or similar dashboard and plan to replace a new aftermarket car radio, you can carefully refer to the following 2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6 car radio installation steps.

2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6 car radio after installation

2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6 car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

 

2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6 car radio installation steps

1. The original car radio.

The original car radio

The original car radio

2. Use a plastic pry tool to remove the radio frame.

Use a plastic pry tool to remove the radio frame

Use a plastic pry tool to remove the radio frame

2-1

2-1

 

 

3. Use a screwdriver to remove four mounting screws of the radio.

Use a screwdriver to remove four mounting screws of the radio

Use a screwdriver to remove four mounting screws of the radio

 

4. Gently pull the original radio out from the dash.

Gently pull the original radio out from the dash

Gently pull the original radio out from the dash

 

 

5. Disconnect the connectors and cables at the back of the radio.

6. Check all the accessories for the new Seicane car radio.

 

7. Connect the harnesses to the back of the new Seicane car radio.

 

8. Connect the Seicane car radio to your original car radio’s plugs, and put the new Seicane car radio into the dash, and fix all the screws.

9. Install the decoration panel and push it inside until the latches lock it.

10. Turn on the new Seicane car radio to conduct a comprehensive check if all functions work well.

 

 

 

 

If you meet any problems that you don’t know how to deal with, it is suggested that you should seek help from your dealer, someone experienced or a professional. If you still think it hard to install the new car radio by yourself, you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, it is very essential for you to carefully pick an ideal car radio. If you have no ideas, here I would like to share a marvelous 2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6 car radio from Seicane with you. For more details, please click:

 

https://www.seicane.com/2012-2013-2014-vw-volkswagen-magotan-android-hd-touchscreen-radio-gps-navigation-system-with-bluetooth-music-audio-mirror-link-wifi-1080p-steering-wheel-control-s0427

 

 

This car radio is running on the latest and the most stable Android 6.0 operation system and a powerful quad-core CPU processor to enhance its capabilities, performance and configuration. Besides, this car radio also comes with a lot of practical and entertainment features, which enables you to enjoy great convenience and enjoyment.

With the assistance of the worldwide real-time GPS navigation system, you are able to easily know where you are currently and find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. Additionally, this unit comes with dual zone function, so you can freely enjoy your favorite music while navigating.

What’s more, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can freely get access to Bluetooth hands-free phone calls as well as Bluetooth streaming music.

If you like this car radio, just don’t hesitate to add this unit to your shopping cart.

Posted in Uncategorized. Tagged with .

Quick Remove and Upgrade Tutorial for a 2011 2012 2013 2014-2016 Honda CITY Audio Aux GPS Sat Nav Car Radio Stereo

As far as I am concerned, an ideal car radio should not only come with practical features to bring convenience for a car owner but also meet the car owner’s entertainment needs to offer him a pleasant driving experience. If you think your old radio is not ideal enough, it is wise of you to quit it and install a new multifunctional one. This article mainly introduces some steps to upgrade a 2011 2012 2013 2014-2016 Honda CITY car radio. If you are interested in it, you can read it carefully.

2011 2012 2013 2014-2016 Honda CITY car radio after installation

2011 2012 2013 2014-2016 Honda CITY car radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. Please prepare a lever and a screwdriver before the removal and the installation.

5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2011 2012 2013 2014-2016 Honda CITY car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Remove screw below the radio and then pry the panel with a plastic removal tool.

Remove screw below the radio and then pry the panel with a plastic removal tool

Remove screw below the radio and then pry the panel with a plastic removal tool

3. Remove the storage pocket and then unscrew two hidden screws with a screwdriver.

Remove the storage pocket and then unscrew two hidden screws with a screwdriver

Remove the storage pocket and then unscrew two hidden screws with a screwdriver

4. Pry the panel with a plastic removal tooland then remove it.

Pry the panel with a plastic removal tooland then remove it

Pry the panel with a plastic removal tool and then remove it

5. Take out the original radio and disconnect the connectors at the back of the radio.

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

If you comes across any problems, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. As for the selection of an ideal car radio, if you have no ideas, here I would like to share a remarkable 2011 2012 2013 2014-2016 Honda CITY car radio from Seicane with you. For more details, please click:

https://www.seicane.com/2011-2012-2016-honda-city-hd-touchscreen-android-radio-car-stereo-with-gps-navigation-bluetooth-usb-wifi-obd2-1080p-rearview-camera-mirror-link-s0409

This car radio comes with a wide range of practical and entertainment features, mainly including 3D GPS navigation system, FM/AM radio, Bluetooth hands-free phone calls, Bluetooth streaming music, SD card or USB connection, file management, etc.

Under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this car radio so as to get access to both Bluetooth hands-free phone calls and Bluetooth streaming music without taking your hands off the steering wheel. Besides, thanks to this unit’s built-in high-end 3D GPS navigation system, you are able to easily know your current locations and find the right way to reach any locations you would like to go to under the guidance of the turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Wish you like this remarkable car radio and good luck to you!

Posted in Uncategorized. Tagged with .

How to Upgrade and Install a 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 Bluetooth GPS Navigation WIFI Radio Car Stereo

If you find that your factory radio is not up-to-date enough for you to get access to some modern and brand new features, it is suggested that you can remove your factory radio and install a new aftermarket car radio for your car. If you get an ideal car radio installed in your car, you can embrace a brand new driving experience. The following is a 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio installation instruction from Seicane. You can refer to it if you own the same or similar dashboard.

1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio after installation

1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

 

2. Use a plastic trim tool to remove trim strip.

Use a plastic trim tool to remove trim strip

Use a plastic trim tool to remove trim strip

 

3. Remove screws marked by red arrows.

Remove screws marked by red arrows

Remove screws marked by red arrows

 

4. Take original radio out of the car.

Take original radio out of the car

Take original radio out of the car

 

5. Pull out original power plug of the car.

Pull out original power plug of the car

Pull out original power plug of the car

 

6. Connect the power cables as the picture shows.

Connect the power cables as the picture shows

Connect the power cables as the picture shows

 

7. Remove screws in the spare tire in the trunk.

Remove screws in the spare tire in the trunk

Remove screws in the spare tire in the trunk

 

8. Take out the spare tire.

Take out the spare tire

Take out the spare tire

 

9. Remove four screws marked with red arrows.

Remove four screws marked with red arrows

Remove four screws marked with red arrows

 

10. Remove screws in triangle crutch.

Remove screws in triangle crutch

Remove screws in triangle crutch

 

11. Take out triangle crutch.

Take out triangle crutch

Take out triangle crutch

 

12. Connect original plug of the car with power plug of DVD GPS.

Connect original plug of the car with power plug of DVD GPS

Connect original plug of the car with power plug of DVD GPS

 

13. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

 

14. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

 

15. Connect the Seicane car radio to your original car radio s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash and install the four screws.

18. Install the trim panel into its original place.

 

Now do you have a general understanding of the above removal and installation process? If you still have any doubts, please feel free to consult your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. Anyway, it is essential to select an ideal car radio for your beloved car, if you have no ideas, you can check out the following link which is an amazing 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/in-dash-1996-2003-bmw-5-series-e39-520i-523i-525i-m5-android-gps-navigation-system-with-touch-screen-3g-wifi-tpms-usb-dvr-obdii-rear-camera-aux-16g-flash-steering-wheel-control-s089993

 

 

This amazing car radio is running on the the stable Android 8.0 operation system and a strong eight-core CPU processor as well as 4GB RAM and 32GB ROM, which enables you to have a much smoother, faster and easier operation experience than before.

Even you don’t have a good sense of directions, you can make full use of this unit’s built-in GPS module to locate where you are currently and find the right way to get to your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

What’s more, under the wireless Bluetooth technology, you can make your Bluetooth-enabled mobile phone pair with this car radio, so you can freely get access to both Bluetooth hands-free phone calls and Bluetooth streaming music for convenience and enjoyment.

If you like this unit, just add it to your shopping cart. Good luck to you!

Posted in Uncategorized. Tagged with .

How to Upgrade a 2003 2004 2005 2006-2007 Honda Accord 7 Car Radio Audio with Bluetooth Music Stereo Competently

What would you if you want to improve your in-car environment and take your driving experience up a notch? If I were you, I will remove the factory radio and install a new aftermarket car radio, which comes with both practical and entertainment features. If you also plan to replace your factory radio, you can refer to a correct installation guide to help you. This article mainly aims to introduce a 2003 2004 2005 2006-2007 Honda Accord 7 car radio installation guide from Seicane. If you own the same or similar dashboard, you can refer to this guide carefully.

2003 2004 2005 2006-2007 Honda Accord 7 car radio after installation

2003 2004 2005 2006-2007 Honda Accord 7 car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriverbefore the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2003 2004 2005 2006-2007 Honda Accord 7 car radio installation guide

1. Use a plastic removal tool to pry the panel on the top of the car radio.

Use a plastic removal tool to pry the panel on the top of the car radio

Use a plastic removal tool to pry the panel on the top of the car radio

2. Pull up the panel and put it aside.

Pull up the panel and put it aside

Pull up the panel and put it aside

3. Use the plastic removal tool to remove the trim part around the gear shifter, and then unplug theconnectors or wires at theback.

Use the plastic removal tool to remove the trim part around the gear shifter, and then unplug theconnectors or wires at theback

Use the plastic removal tool to remove the trim part around the gear shifter, and then unplug theconnectors or wires at theback

3-1

3-1

4. Get the gear shifter removed to thelower position and then remove the small plastic part whichis shown below. Then use a screw driver to unscrew all screws that fix the whole plastic part and then remove it.

Get the gear shifter removed to thelower position and then remove the small plastic part whichis shown below. Then use a screw driver to unscrew all screws that fix the whole plastic part and then remove it

Get the gear shifter removed to thelower position and then remove the small plastic part whichis shown below. Then use a screw driver to unscrew all screws that fix the whole plastic part and then remove it

4-1

4-1

4-2

4-2

5. Remove screws that fix the compartment on the bottom of the original car radio and then remove the compartment.

Remove screws that fix the compartment on the bottom of the original car radio and then remove the compartment

Remove screws that fix the compartment on the bottom of the original car radio and then remove the compartment

5-1

5-1

6. Remove all screws that fix the original car radio.

Remove all screws that fix the original car radio

Remove all screws that fix the original car radio

7. Gently take out the original car radio and unplug the connectors and cables at the back of the radio.

Gently take out the original car radio and unplug the connectors and cables at the back of the radio

Gently take out the original car radio and unplug the connectors and cables at the back of the radio

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original stereo’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

Now do you have a understanding of 2003 2004 2005 2006-2007 Honda Accord 7 car radio installation? If you have any doubts, you can contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to install a new car radio, you can straightly go to a car radio upgrade center and ask a professional technician to help you install the new car radio. While for the selection of an ideal car radio, you can refer to the following link which is a 2003 2004 2005 2006-2007 Honda Accord 7 car radio from Seicane. For more details, please click:

https://www.seicane.com/android-2003-2007-honda-accord-7-car-stereo-gps-navigation-head-unit-with-1080p-video-bluetooth-music-autoradio-steering-wheel-control-rearview-camera-dvr-4g-wifi-s301188


With this car radio installed in your car, you can freely get access to a wide range of practical and entertainment features, mainly including 3D GPS navigation system of high precision, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, file management, SD card or USB connection, etc.

With the assistance of the worldwide real-time GPS navigation system, you can easily locate where you are currently and find the right way to get to any locations you would like to go to according to the turn-by-turn directions and voice prompts. And thanks to this unit’s dual zone function, you can also listen to your favorite music while navigating.

Additionally, this unit comes with built-in Bluetooth module, which enables you to dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone music playlists for both convenience and enjoyment.

If you are interested with this car radio, just install it and enjoy your driving accompanied by it. Good luck!

Posted in Uncategorized. Tagged with .