Monthly Archives: May 2018

The Quick Tutorial to Upgrade a Universal Toyota Nissan KIA GPS Bluetooth Car Radio

With the rapid development of technology, nowadays more and more car owners tend to remove their outdated factory radio and install a new multifunctional car radio to enhance their car’s capabilities so as to upgrade their in-car life. If you also want to upgrade your in-car life, you can consider replacing your factory radio with a brand new multifunctional car radio. The following is an easy-to-understand Universal Toyota Nissan KIA car radio installation guide from Seicane, which can be taken as your reference if you own the same or similar dashboard.

Universal Toyota Nissan KIA car radio after  installation

Universal Toyota Nissan KIA car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

Universal Toyota Nissan KIA car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Prepare a flat plastic removal tool and use it to pry the air vent.

Prepare a flat plastic removal tool and use it to pry the air vent

Prepare a flat plastic removal tool and use it to pry the air vent

3. Gently remove the air vent and put it aside.

Gently remove the air vent and put it aside

Gently remove the air vent and put it aside

4. Use a screwdriver to remove the four screws that are holding the car radio.

Use a screwdriver to remove the four screws that are holding the car radio

Use a screwdriver to remove the four screws that are holding the car radio

5. Gently pull the original car radio out from the original car radio.

Gently pull the original car radio out from the original car radio

Gently pull the original car radio out from the original car radio

6. Disconnect all the connectors and cables at the back of the original car radio.

Disconnect all the connectors and cables at the back of the original car radio

Disconnect all the connectors and cables at the back of the original car radio

7. Remove the original car radio fascia since you will use it later.

Remove the original car radio fascia since you will use it later

Remove the original car radio fascia since you will use it later

8. Make the new car radio and the original fascia get together.

Make the new car radio and the original fascia get together

Make the new car radio and the original fascia get together

9. Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces.

Make the original car's connector plug to the new car radio's power connector. And Make sure the rest of connectors and cables are plugged to the radio's right interfaces

Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces

9-1

9-1

9-2

9-2

10. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

11. Carefully place the new car radio, tighten the screws that hold the car radio with a screwdriver.

Carefully place the new car radio, tighten the screws that hold the car radio with a screwdriver

Carefully place the new car radio, tighten the screws that hold the car radio with a screwdriver

12. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for you to some extent. If you have any doubts, please feel free to contact your dealer, communicates with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician from a car radio upgrade center to help you install the new car radio. Anyway, it is essential for you to select an ideal car radio first of all. If you have no ideas, you can refer to the following link which is a remarkable Universal Toyota Nissan KIA car radio from Seicane. For more details, please click:

https://www.seicane.com/android-universal-aftermarket-autoradio-gps-car-a-v-system-with-dvd-player-radio-rds-bluetooth-mirror-link-obd2-touch-screen-3g-wifi-steering-wheel-control-s6938g


This car radio is integrated with a wide range of comprehensive features to meet your different needs in your car, which mainly include 3D GPS navigation system, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, AUX, steering wheel control, USB/SD card connection, file management, etc.

With this car radio installed in your car, under the guidance of the worldwide real-time GPS navigation system, you are able to easily know your current locations and navigate to your desired destinations through the turn-by-turn directions and voice prompts. Besides, thanks to this unit’s dual zone function, you can also listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

Besides, under the wireless Bluetooth technology, this car radio enables you to pair your Bluetooth-enabled mobile phone with this car radio, so you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as freely listen to your favorite music streaming from your phone music playlists, which can add a lot of convenience and enjoyment to your journey.

What are you waiting for? If you like this unit, just add it to your shopping cart right now!

Posted in Uncategorized. Tagged with .

Concise Steps to Remove and Upgrade a 2005 2006 2007 2008-2011 Jeep Grand Cherokee Car Radio with GPS Bluetooth Function

Now please have a look at the following picture. It is a Seicane 2005 2006 2007 2008-2011 Jeep Grand Cherokee car radio after installation, which looks very awesome, doesn’t it?

If you own a 2005 2006 2007 2008-2011 Jeep Grand Cherokee and you are fed up with your factory radio since it cannot be compatible with some new and modern features, you might as well replace it with a brand new one. This article is mainly about a detailed installation guide for a     2005 2006 2007 2008-2011 Jeep Grand Cherokee car radio. If you have the same or similar dashboard, you can refer to the following car radio installation instruction.

2005 2006 2007 2008-2011 Jeep Grand Cherokee Car Radio after installation

2005 2006 2007 2008-2011 Jeep Grand Cherokee Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2005 2006 2007 2008-2011 Jeep Grand Cherokee car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Remove the panel by prying the edges with a lever.

Remove the panel by prying the edges with a lever

Remove the panel by prying the edges with a lever

3. Unscrew four screws holding the original radio in place with a screwdriver.

Unscrew four screws holding the original radio in place with a screwdriver

Unscrew four screws holding the original radio in place with a screwdriver

4. Take the original radio out of the dash.

Take the original radio out of the dash

Take the original radio out of the dash

5. Disconnect the connectors at the back of the original radio.

Disconnect the connectors at the back of the original radio

Disconnect the connectors at the back of the original radio

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original car radio’s plugs.

9. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane stereo into the dash.

11. Put everything into their original place.

 

With the help of the related installation guide, can you finish the whole car radio installation process by yourself? If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. For avoiding damage to either your car radio or your car, you can straightly go to a car radio upgrade center and have the new car radio installed by a professional technician. While for the selection of an ideal car radio, if you have no ideas, you can refer to the following link which is a remarkable 2005 2006 2007 2008-2011 Jeep Grand Cherokee car radio from Seicane. For more details, please click:

https://www.seicane.com/1-din-radio-android-2005-2006-2007-2008-2011-jeep-grand-cherokee-gps-sat-nav-wifi-usb-sd-bluetooth-phone-dvd-player-support-steering-wheel-control-backup-camera-dvr-obd2-tpms-s6933g

This unit’s operation system has been upgraded to the most advanced and stable Android 8.0 version and it comes with a strong eight-core Cortex A53 CPU as well as 4GB RAM to help you enjoy a much smoother, faster and easier operation experience.

With the assistance of the worldwide real-time GPS navigation system, you are able to know where you are currently and navigate to your desired destinations according to the turn-by-turn directions and voice prompts. And this unit also comes with dual zone function, which enables you to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

Besides, by simply pairing your Bluetooth-enabled mobile phone, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music without keeping your hands off the steering wheel. So you will gain a lot of convenience.

Wish you like this car radio. Good luck to you!

Posted in Uncategorized. Tagged with .

The Most Simple Way to Upgrade a 2012 2013 2014 Kia Sorento Dashboard Radio Speakers Head Unit

If your factory radio cannot be compatible with a wide range of comprehensive features, in my opinion, you can select an ideal car radio to replace it. Under this circumstance, it is wise of you to find a related installation guide and read it carefully to help with the new car radio installation. This article is mainly about a 2012 2013 2014 Kia Sorento car radio installation guide. If you own the same or similar dashboard, you can follow it carefully in the installation process.

2012 2013 2014 Kia Sorento car radio after installation

2012 2013 2014 Kia Sorento car radio after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2012 2013 2014 Kia Sorento car radio installation guide

1. This is the original car radio.

This is the original car radio

This is the original car radio

2. Remove the main panel in the bottom.

Remove the main panel in the bottom

Remove the main panel in the bottom

2-1

2-1

2-2

2-2

3. Remove the original surrounding panel with a screwdriver, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original surrounding panel with a screwdriver, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original surrounding panel with a screwdriver, pry gently along the gap and pick up the panel, then remove it and then set it aside

3-1

3-1

4. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

5. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

6. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

7. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

8. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables

Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables

9. If everything is OK, firm screws into their original place.

10. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

 

Wish the above installation guide can be helpful for you. If you have any problems, you can browse some professional websites, contact your dealer, communicate with someone experienced or turn to a professional for help. Before installation, please carefully select an ideal car radio for your beloved car. If you don’t know which kind of car radios can fit your car, here I would like to recommend a remarkable 2012 2013 2014 Kia Sorento car radio from Seicane to you. For more details, please click:

https://www.seicane.com/hd-touchscreen-2013-kia-sorento-android-gps-radio-bluetooth-obd2-dvr-rearview-camera-1080p-steering-wheel-control-wifi-rearview-camera-s32759g

This intelligent car radio is loaded with the latest and most stable Android 8.0 operation system and a strong 8-core CPU processor to enhance its capability and performance.

When you travel around an unfamiliar place, you can easily and quickly locate where you are and find the right way to get to your desired destinations through the turn-by-turn directions and voice prompts. And you can also listen to your favorite music while navigating thanks to this unit’s dual zone function. Moreover, without taking your hands off the steering wheel, you can freely get access to Bluetooth hands-free calls and Bluetooth streaming music as long as you pair your Bluetooth-enabled mobile phone with this car radio, which will bring you a lot of convenience and enjoyment.

Wish you have a wonderful trip accompanied by this unit. Good luck

Posted in Uncategorized. Tagged with .

How to Succeed in 2006 2007 2008 2009-2013 Audi TT GPS Bluetooth Touch Screen Car Radio Installation Process

Have you ever tried to install a new car radio on your own before? If not, you may think it too hard for you to do it by yourself. As a matter of fact, it is not too difficult since most of car radios are just plug and play with special wiring harness. To have a general understanding of a car radio installation, you can refer to a related car radio installation guide. The following is a 2006 2007 2008 2009-2013 Audi TT car radio installation guide, which can be taken as your reference if you own the same or similar dashboard.

2006 2007 2008 2009-2013 Audi TT GPS Bluetooth Touch Screen Car Radio after installation

2006 2007 2008 2009-2013 Audi TT GPS Bluetooth Touch Screen Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2006 2007 2008 2009-2013 Audi TT car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Prepare four removal keys.

Prepare four removal keys

Prepare four removal keys

3. There are four removal slots in the radio. Insert the removal keys into the holes of the radio.

There are four removal slots in the radio. Insert the removal keys into the holes of the radio

There are four removal slots in the radio. Insert the removal keys into the holes of the radio

4. Pull outwards to release the radio.

Pull outwards to release the radio

Pull outwards to release the radio

5. Remove the removal keys in the radio.

6. Unplug connectors and cables at the back of the radio.

Unplug connectors and cables at the back of the radio

Unplug connectors and cables at the back of the radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can offer you some help to some degree. If you have any doubts, you can browse some professional websites. Or you can seek help from your dealer, someone experienced or a professional. If you are afraid of making damage to either your car radio or your car, you’d better go to a car radio upgrade center to have the new car radio installed by a professional technician.

While for the selection of an ideal car radio, if you have no ideas, you can refer to an amazing 2006 2007 2008 2009-2013 Audi TT car radio from Seicane. Here comes the link, please click:

https://www.seicane.com/double-din-pure-android-2006-2013-audi-tt-gps-dvd-in-dash-radio-system-with-bluetooth-radio-rds-3g-wifi-mirror-link-obd2-hd-multi-touch-screen-backup-camera-s6917g

The operation system of this car radio has been upgraded to the most advanced and stable Android 8.0 version, and this car radio is loaded with a strong eight-core CPU processor. Besides, it has 4GB RAM and 32GB INland flash. Therefore, with this car radio installed in your car, you are able to enjoy a much smoother, faster and easier operation experience than ever before.

With the assistance of the built-in 3D GPS navigation system, you can easily and quickly know your current locations and accurately gain the most suitable route option to arrive at your desired destinations according to turn-by-turn directions and voice prompts. And you can also enjoy your favorite music or FM/AM radio while navigating, which won’t have any negative influence on GPS function.

What’s more, without taking your hands off the steering wheel, you can freely dial,answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music as long as you pair your Bluetooth-enabled mobile phone with this car radio.

What are you waiting for? If you like this unit, just add it to your shopping cart. Good luck!

Posted in Uncategorized. Tagged with .