Monthly Archives: March 2018

How to Replace a 2006 2007 2008 2009 2010-2012 KIA Carens Car Radio Stereo Audio system

As a car owner, you may wonder how to get an ideal car radio installed in your car. Under this circumstance, it is wise of you to go to a car radio upgrade center to seek help from a professional technician. Or you can also try to finish the installation with the guidance of a related installation instruction. The following is a 2006 2007 2008 2009 2010-2012 KIA Carens car radio installation instruction which can be taken as your reference if you have the same or similar dashboard.

2006 2007 2008 2009 2010-2012 KIA Carens Car Radio after installation

2006 2007 2008 2009 2010-2012 KIA Carens Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2006 2007 2008 2009 2010-2012 KIA Carens car radio installation instruction

1. Pry around the edges of the trim panel with a lever.

Pry around the edges of the trim panel with a lever

Pry around the edges of the trim panel with a lever

2. Remove the trim panel.

Remove the trim panel

Remove the trim panel

3. Disconnect all the connectors of the trim panel.

Disconnect all the connectors of the trim panel

Disconnect all the connectors of the trim panel

4. Unscrew all the screws holding the original car radio in place with a screwdriver.

Unscrew all the screws holding the original car radio in place with a screwdriver

Unscrew all the screws holding the original car radio in place with a screwdriver

5. Gently take the original car radio out of the dashboard.

Gently take the original car radio out of the dashboard

Gently take the original car radio out of the dashboard

6. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio

Disconnect all connectors at the back of the original car radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Wish you can learn some skills from the above installation guide. If you have any problems, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio directly. To help you select an ideal car radio, I would like to share a remarkable 2006 2007 2008 2009 2010-2012 KIA Carens car radio from Seicane with you.

https://www.seicane.com/oem-android-gps-radio-bluetooth-for-2006-2012-kia-carens-with-touch-screen-dvd-player-navigation-system-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-usb-sd-mirror-link-s166227

Based on the advanced Android 7.1 operation system as well as a high-quality quad-core CPU processor, this car radio can greatly facilitates its operation and provide users with its higher performance and configurations.

With this car radio installed in your car, you can get access to a wide range of comprehensive features, mainly including 3D GPS navigation system, Bluetooth hands-free calls, Bluetooth streaming music, FM/AM radio tuner, DVD player, file management, etc.

Thanks to the high-accuracy 3D GPS navigation system of this unit, you can easily know your current locations and find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

The Easy-to-understand Steps in a 2009 2010 2011 VW Volkswagen Passat B6 GPS Bluetooth DVD Car Radio Removal and Installation

When you are driving to an unfamiliar place, an accurate GPS navigation system can help you quickly know your current locations and easily find the best way to reach your destinations. If your factory radio cannot GPS function, you can replace it with a multifunctional car radio with GPS navigation function. The following is a step-by-step installation instruction from Seicane for a 2009 2010 2011 VW Volkswagen Passat B6 car radio. If you also have the same or similar dashboard, you can take this instruction as a reference.

2009 2010 2011 VW Volkswagen Passat B6 GPS Bluetooth DVD Car Radio after installation

2009 2010 2011 VW Volkswagen Passat B6 GPS Bluetooth DVD Car Radio after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2009 2010 2011 VW Volkswagen Passat B6 car radio installation instruction

1. Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

 

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

 

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

 

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

 

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

 

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

 

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

 

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

 

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

 

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

 

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

 

12. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

 

13. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

 

14. Connect the Seicane car radio to your original car radio’s plugs.

15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car radio into the dash.

17. Put everything into their original place.

 

 

 

Please make clear every specific step of the above installation instruction. Whether you have doubts about your car radio or your car, you can consult your dealer, communicate with someone experienced or turn to a professional. Or you can directly arrange a professional technician to help you install new car radio.

To help you better select an ideal car radio, here I’d like to share a remarkable 2009 2010 2011 VW Volkswagen Passat B6 car radio from Seicane with you. For more details, please click:

 

https://www.seicane.com/android-gps-navigation-system-for-2009-2010-2011-vw-volkswagen-passat-b6-with-dvd-player-radio-bluetooth-mirror-link-obd2-dvr-rearview-camera-steering-wheel-control-3g-wifi-s6920

With the assistance of the high-end 3D GPS navigation system, you can locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. Additionally, thanks to this unit’s dual zone function, you can freely enjoy beautiful music while navigating.

Under the wireless Bluetooth technology, without taking your hands off the steering wheel, Bluetooth hands-free calls and Bluetooth streaming music are both available for you if you pair your Bluetooth-enabled mobile phone with this unit, which can add a lot of convenience and fun to your trip.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

How to Replace a 2012 PEUGEOT 4008 Car Radio Not Working with an Aftermarket Bluetooth Navigation

If you are fed up with your factory radio since it only has simple functions, it is high time for you to think about replacing your factory radio with a new aftermarket car radio which can support a lot of comprehensive features. The following is a 2012 PEUGEOT 4008 car radio installation instruction from Seicane. If you own the same or similar dashboard, you can refer to the following installation instruction.

2012 PEUGEOT 4008 Car Radio after installation

2012 PEUGEOT 4008 Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriverbefore the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2012 PEUGEOT 4008 car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

 

2. Use a plastic knife to pry the trim panel and remove it.

Use a plastic knife to pry the trim panel and remove it

Use a plastic knife to pry the trim panel and remove it

 

 

 

 

3. Remove screws that are holding the radio.

Remove screws that are holding the radio

Remove screws that are holding the radio

 

4. Take out the original car radio.

Take out the original car radio

Take out the original car radio

 

5. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio

Disconnect the connectors and cables at the back of the radio

 

 

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original stereo’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Before installation, please make clear every detailed step. If you have any problems you cannot deal with,  you can seek help from your dealer, someone experienced or a professional. To make your upgrading successful, first of all, you should select an ideal car radio. If you don’t have any ideas, you can refer to the following link which is a remarkable 2012 PEUGEOT 4008 car radio from Seicane.

 

https://www.seicane.com/2012-peugeot-4008-android-radio-dvd-player-gps-navigation-system-with-touch-screen-bluetooth-mirror-link-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-usb-sd-ipod-s168064

 

With an attractive interface and high configurations, this all-in-one car radio can be regarded as one of the good choice for you to upgrade your in-car environment and driving experience.

Thanks to the worldwide real-time GPS navigation system of high accuracy, you are able to easily locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. And you can also freely enjoy your favorite music while navigating thanks to this unit’s dual zone function.

Besides, both hands-free calls and Bluetooth music are both supported when you utilize the advanced Bluetooth technology to make your enabled cell phone sync with this unit.

If you like this unit, don’t hesitate to your shopping cart. Good luck!

Posted in Uncategorized. Tagged with .

The Perfect Solution to a 2006 2007 2008 2009 2010-2011 Chevy Chevrolet LOVA Bluetooth DVD GPS Navigation Removal

If you are not satisfied with your factory radio and are planning to replace your factory radio in 2006 2007 2008 2009 2010-2011 Chevy Chevrolet LOVA, here I would like to share a related 2006 2007 2008 2009 2010-2011 Chevy Chevrolet LOVA car radio installation guide from Seicane with you, which can be taken as a reference. Wish it can offer you some help to some degree.

2006 2007 2008 2009 2010-2011 Chevy Chevrolet LOVA Bluetooth DVD GPS Car Radio after installation

2006 2007 2008 2009 2010-2011 Chevy Chevrolet LOVA Bluetooth DVD GPS Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2006 2007 2008 2009 2010-2011 Chevy Chevrolet LOVA car radio installation guide

1.Pry the surrounded panel out of the dash with a plastic knife.

Pry the surrounded panel out of the dash with a plastic knife

Pry the surrounded panel out of the dash with a plastic knife

2.Remove screws that fixed the radio on the dashboard with a screwdriver.

Remove screws that fixed the radio on the dashboard with a screwdriver

Remove screws that fixed the radio on the dashboard with a screwdriver

3.Gently pull the factory radio out of the dash.

Gently pull the factory radio out of the dash

Gently pull the factory radio out of the dash

4.Then unplug the connectors at the back of the factory radio.

Then unplug the connectors at the back of the factory radio

Then unplug the connectors at the back of the factory radio

5. Check all the accessories for the new Seicane car radio.

6. Connect the harnesses to the back of the new Seicane car radio.

7. Connect the Seicane car radio to your original radio’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Now do you know how to remove the factory radio and install the new car radio for 2006 2007 2008 2009 2010-2011 Chevy Chevrolet LOVA ? If not, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Or if you still think it hard for you to finish the installation process by yourself, you can directly ask a professional to help you install the new car radio. Besides, if you don’t know how to pick a suitable car radio, here I would like to recommend a remarkable 2006 2007 2008 2009 2010-2011 Chevy Chevrolet LOVA car radio from Seicane to you. For more details, please click:

https://www.seicane.com/2006-2011-chevy-chevrolet-lova-android-hd-touch-screen-radio-gps-navigation-system-dvd-player-bluetooth-music-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-ipod-steering-wheel-control-usb-sd-mirror-link-s167046

This great car radio can be regarded as one of the best choices for you to replace your factory radio since it is featured with the intelligent Android 7.1 operation system and a high-quality quad-core CPU processor.

Under the text-to-speech guidance provided by the high-end 3D GPS navigation system, you can easily know where you are and find the correct way to reach any locations you would like to go to. And while navigating, you can freely listen to your favorite music because this unit comes with dual zone function and the music will automatically switch to GPS voice.

And through Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can freely get access to Bluetooth hands-free calls and streaming music to have more convenience and fun in car.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

How to Replace a 2009 2010 2011 2012 2013 Subaru Legacy Car Radio Touch Screen GPS

If you are pursuing a comfortable car interior environment and a relaxing driving experience, you can consider replacing your factory radio with a new multifunctional car radio. And as a matter of fact, it is not too difficult for you to install a new car radio, so you can follow a correct installation instruction to deal with the installation. This article mainly aims to introduce a 2009 2010 2011 2012 2013 Subaru Legacy car radio installation guide from Seicane. If you have the same or similar dashboard, you can take this instruction as a reference.

2009 2010 2011 2012 2013 Subaru Legacy Car Radio after installation

2009 2010 2011 2012 2013 Subaru Legacy Car Radio after installation

Here are some tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and www.seicane.com make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2009 2010 2011 2012 2013 Subaru Legacy car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

3. Remove six screws that fixed the radio on the dashboard.

Remove six screws that fixed the radio on the dashboard

Remove six screws that fixed the radio on the dashboard

4. Gently pull the factory radio out of the dash.

Gently pull the factory radio out of the dash

Gently pull the factory radio out of the dash

5. Then unplug the connectors at the back of the factory radio.

Then unplug the connectors at the back of the factory radio

Then unplug the connectors at the back of the factory radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Now do you know how to remove the factory radio and install the new car radio for a 2009 2010 2011 2012 2013 Subaru Legacy? If you don’t, please feel free to consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly go to a car radio upgrade center to have the car radio installed by a professional technician.

Besides, if you are still looking for an ideal car radio, here I would like to recommend an amazing 2009 2010 2011 2012 2013 Subaru Legacy car radio from Seicane to you. For more details, please click:

https://www.seicane.com/oem-android-gps-radio-dvd-player-for-2009-2013-subaru-legacy-with-hd-1024-600-touch-screen-bluetooth-navigation-system-obd2-dvr-rearview-camera-tv-1080p-video-usb-sd-3g-wifi-steering-wheel-control-mirror-link-s167069

Equipped with a wide range of comprehensive features, this intelligent car radio can be regarded as one of the best choices to replace your factory radio.

With this car radio installed in your car, you can take full advantage of the high-end 3D GPS navigation, so you can know your current locations and navigate to your desired destinations according to turn-by-turn directions and voice prompts. And thanks to this unit’s dual zone function, you can freely listen to your favorite music while navigating, which won’t have any negative influence on GPS function.

If you like this unit, just add it to your shopping cart. Good luck to you!

Posted in Uncategorized. Tagged with .

How to Effectively Replace a 2006 2007 2008 2009 KIA CEED Car Radio Bluetooth GPS

Believe it or not, an ideal car radio which supports a wide range of practical and entertainment features can help effectively upgrade your in-car life. If you are not satisfied with your current in-car life and look forward to improving it, you can consider replacing your factory radio with a new aftermarket car radio. The following is a 2006 2007 2008 2009 KIA CEED car radio installation instruction from Seicane. If you have the same or similar dashboard, you can refer to this instruction carefully.

2006 2007 2008 2009 KIA CEED Car Radio after installation2006 2007 2008 2009 KIA CEED Car Radio after installation

2006 2007 2008 2009 KIA CEED Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2006 2007 2008 2009 KIA CEED car radio installation instruction

1. Pry around the edges of the trim panel with a lever.

Pry around the edges of the trim panel with a lever

Pry around the edges of the trim panel with a lever

2. Remove the trim panel.

Remove the trim panel

Remove the trim panel

3. Disconnect all the connectors of the trim panel.

Disconnect all the connectors of the trim panel

Disconnect all the connectors of the trim panel

4. Unscrew all the screws holding the original car radio in place with a screwdriver.

Unscrew all the screws holding the original car radio in place with a screwdriver

Unscrew all the screws holding the original car radio in place with a screwdriver

5. Gently take the original car radio out of the dashboard.

Gently take the original car radio out of the dashboard

Gently take the original car radio out of the dashboard

6. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio

Disconnect all connectors at the back of the original car radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Now do you have a general understanding of the above installation instruction? If you meet any difficulties and don’t know how to overcome them, it is suggested that you should contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. While for the selection of an ideal car radio, if you have no ideas, here I would like to share a remarkable 2006 2007 2008 2009 KIA CEED car radio from Seicane with you. For more information, please click:

https://www.seicane.com/android-2006-2009-kia-ceed-radio-bluetooth-dvd-player-gps-navigation-system-with-touchscreen-obd2-dvr-rearview-camera-tv-3g-wifi-steering-wheel-control-usb-sd-canbus-1080p-video-mirror-link-s166227

With this all-in-one car radio installed in your car, you will be able to have a much smoother and faster operation experience.

With the help of the text-to-speech guidance provided by the 3D high-end GPS navigation system, you are able to easily know your current locations and accurately find the right way to reach any locations you would like to go to. Besides, this unit’s dual zone function enables you to freely enjoy music while navigating, and the music will automatically switch to GPS voice.

What’s more, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, both Bluetooth hands-free calls and streaming music are available for you to bring you a lot of convenience and enjoyment.

If you like this unit, just add it to your shopping cart. Good luck!

Posted in Uncategorized. Tagged with .

How to Replace a 2013 2014 2015 VW Volkswagen GOLF 7 Car Radio Bluetooth GPS

If you are an owner of a 2013 2014 2015 VW Volkswagen GOLF 7, you can look at the following image which is a modern 2013 2014 2015 VW Volkswagen GOLF 7 car radio from Seicane after installation. If you have the same or similar dashboard, you can try to install this car radio in your car so as to upgrade your driving experience. And the following is a 2013 2014 2015 VW Volkswagen GOLF 7 car radio installation guide which can be taken as your reference.

2013 2014 2015 VW Volkswagen GOLF 7 Car Radio after installation

2013 2014 2015 VW Volkswagen GOLF 7 Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2013 2014 2015 VW Volkswagen GOLF 7 car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Release the AC control panel.

Release the AC control panel

Release the AC control panel

3. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

Remove the trim panel with a plastic removal tool

4. Insert four release keys in the removal slots of the radio and pull outwards to release the radio.

Insert four release keys in the removal slots of the radio and pull outwards to release the radio

Insert four release keys in the removal slots of the radio and pull outwards to release the radio

5. Disconnect connectors and cables at the back of the radio.

Disconnect connectors and cables at the back of the radio

Disconnect connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original stereo’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Wish you can learn something useful from the above installation. If you have any doubts, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. To help you select an ideal car radio, here I would like to share a remarkable 2013 2014 2015 VW Volkswagen GOLF 7 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/in-dash-radio-hd-touchscreen-android-for-2013-2014-2015-vw-volkswagen-golf-7-gps-navigation-system-support-usb-aux-steering-wheel-control-dvr-obdii-4g-tpms-wifi-backup-camera-dab-s329590

Thanks to this unit’s built-in Bluetooth module, you are able to connect your Bluetooth-enabled mobile phone to this car radio so as to get access to Bluetooth hands-free calls and Bluetooth streaming music. Additionally, with the assistance of the turn-by-turn directions and voice prompts provided by the high-accuracy 3D GPS navigation system, you are able to know your current locations and navigate to your desired destinations. And while navigating, you can freely listen to your favorite music thanks to this unit’s dual zone function.

Just have fun in car accompanied by this multifunctional car radio!

Posted in Uncategorized. Tagged with .

How to Replace a 2009 2010 2011 2012 2013 Toyota Prius(RHD) Car Radio

If your factory radio is too outdated to be compatible with many modern features, you can consider replacing your factory radio with a new aftermarket car radio which comes with a wide range of practical and entertainment features to enrich your in-car life.

This article is mainly about a step-by-step installation guide for a 2009 2010 2011 2012 2013 Toyota Prius(RHD) car radio. If you have the same or similar dashboard, you can read this article carefully.

2009 2010 2011 2012 2013 Toyota Prius(RHD) Car Radio after installation

2009 2010 2011 2012 2013 Toyota Prius(RHD) Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2009 2010 2011 2012 2013 Toyota Prius(RHD) car radio installation guide

1. Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool.

Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool

Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool

2. Remove the dash panel below the radio.Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash.

Remove the dash panel below the radio.Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash

Remove the dash panel below the radio.Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash

3. Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force.

Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force

Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force

4. Disconnect the wiring.

Disconnect the wiring

Disconnect the wiring

5. Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver.

Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver

Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver

6. Pull the radio toward you slowly.

Pull the radio toward you slowly

Pull the radio toward you slowly

7. Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves.

Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves

Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original car radio’s plugs.

11. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane radio into the dash.

13. Put everything into their original place.

 

Wish the above installation guide can do you some help for your car radio installation. If you have any doubts, you can seek help from your dealer, someone experienced or a professional. Or you can directly go to a car radio upgrade center. Anyway, it is essential for you to select an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is an amazing 2009 2010 2011 2012 2013 Toyota Prius(RHD) car radio from Seicane.

https://www.seicane.com/android-2009-2013-toyota-prius-rhd-gps-navigation-radio-dvd-player-with-usb-bluetooth-music-audio-system-wifi-mirror-link-1080p-video-s18t055r

This car radio is upgraded to the most advanced Android 7.1.2 operation system and a high-quality quad-core CPU processor, so you can enjoy the much smoother, easier and faster operation experience.

Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this car radio so as to get access to Bluetooth hands-free calls and Bluetooth streaming music. Therefore you can gain numerous convenience and enjoyment. Besides, with the help of the high-end 3D GPS navigation system, you are able to reach anywhere you would like to go to through turn-by-turn directions and voice prompts.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .