Monthly Archives: February 2018

How to Upgrade a 2013 2014 2015 2016 TOYOTA Sienna XL30 Bluetooth Head Unit

As a car owner, you must want to embrace an extremely wonderful driving experience. To achieve that goal, you can replace your old factory radio with a new multifunctional car radio which is integrated with a lot of comprehensive features to meet your different needs in car. Today I would like to share a car radio installation guide from Seicane especially for a 2013 2014 2015 2016 TOYOTA Sienna XL30 car radio with you. You might as well take it as a reference.

2013 2014 2015 2016 TOYOTA Sienna XL30    Bluetooth Head Unit after installation

2013 2014 2015 2016 TOYOTA Sienna XL30 Bluetooth Head Unit after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2013 2014 2015 2016 TOYOTA Sienna XL30 car radio installation guide

1. Use a lever to pry along the plastic panel and remove it.

Use a lever to pry along the plastic panel and remove it

Use a lever to pry along the plastic panel and remove it

2. Release the panel under the 50 shift and hang it on the panel.

Release the panel under the 50 shift and hang it on the panel

Release the panel under the 50 shift and hang it on the panel

3. Remove the a/c control unit with your hands.

Remove the a/c control unit with your hands

Remove the a/c control unit with your hands

4. Unplug the connectors at the back of the a/c control unit.

Unplug the connectors at the back of the a/c control unit

Unplug the connectors at the back of the a/c control unit

5. Remove the screws holding the factory radio in place with a screwdriver.

Remove the screws holding the factory radio in place with a screwdriver

Remove the screws holding the factory radio in place with a screwdriver

6. Take the factory radio out of the dashboard.

Take the factory radio out of the dashboard

Take the factory radio out of the dashboard

7. Disconnect the connectors at the back of factory radio.

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original car radio’s plugs.

11. Put the new Seicane car radio into your dashboard, you should check whether your connections are correct, the new unit is in right position, and you’d better have a tidy for the cables.

12. Check whether the new Seicane car radio is working without problem.

13. If there is no problem, firm removed screws that are put aside, then make trim panel back on your new Seicane car radio.

 

Wish the above installation guide can be helpful for you to some degree. If you have any doubts, you can browse some professional websites, consult your dealer or turn to a professional for help. Besides, it is very essential for you to pick an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is a remarkable 2013 2014 2015 2016 TOYOTA Sienna XL30 car radio from Seicane.

https://www.seicane.com/aftermarket-android-gps-navigation-system-for-2013-2016-toyota-sienna-xl30-radio-upgrade-with-bluetooth-music-dvd-player-car-stereo-touch-screen-3g-wifi-mirror-link-obd2-steering-wheel-control-s18t023

This marvelous car radio can be regarded as one of the best choices to replace your factory radio. It comes with a wide range of upgraded and new features such as GPS navigation system, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, DVD player, WiFi, etc to meet almost all your different needs.

Thanks to the worldwide real-time GPS navigation system, you are able to know your current locations and find the right way to reach any locations you would like to go to according to turn-by-turn directions and voice prompts. And with dual zone function, this unit allows you to freely listen to radio, USB or SD card playback while navigating.

Wish you enjoy your driving accompanied by this multifunctional car radio. Good luck to you!

Posted in Uncategorized. Tagged with .

A Must-see Tutorial on a 2006 2007 2008 2009 2010 TOYOTA Camry Car Radio Upgrade

If you have a 2006 2007 2008 2009 2010 TOYOTA Camry, but are not satisfied with your original car radio, then you can consider replacing your factory radio with a brand new all-in-one car radio. To effectively finish the whole replacement process, whether you are experienced or a green hand, you must find a detailed removal and installation guide to help you. The following is a 2006 2007 2008 2009 2010 TOYOTA Camry car radio installation guide. You might as well refer to it carefully.

2006 2007 2008 2009 2010 TOYOTA Camry Car Radio after installation

2006 2007 2008 2009 2010 TOYOTA Camry Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2006 2007 2008 2009 2010 TOYOTA Camry car radio installation guide

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original car radio’s plugs.

9. Put the new Seicane car radio into the dash.

10. Turn on the new Seicane car radio and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

That’s all about how to effectively remove and install a 2006 2007 2008 2009 2010 TOYOTA Camry car radio. If there are any problems you cannot deal with independently, you’d better consult your dealer or turn to a professional for help. Or you can arrange a professional technician to help you install the new car radio. However, if you are still looking for a suitable car radio, you can check out the following link which is a 2006 2007 2008 2009 2010 TOYOTA Camry car radio from Seicane.

https://www.seicane.com/hot-double-din-android-gps-navigation-system-for-2006-2007-2008-2009-2010-camry-with-cd-dvd-player-radio-rds-3g-wifi-mirror-link-obd2-1080p-mp3-mp4-s126003e

Based on the pure Android 6.0 operation system, 8 – Core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 2GB RAM, this car radio is intelligent enough to be the replacement for your factory radio in your beloved car.

As for practical features, I’d like to take the Bluetooth connectivity as an example. Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this unit so as to get access to hands-free phone calls and streaming music without taking your hands off the steering wheel, which can bring a lot of convenience and enjoyment to you.

While as for entertainment features, you can make full use of this unit’s DVD player function. Audio and video formats such as DVD/DIVX/MP4/MP3/MP2/VCD are compatible with this unit, so you can play almost whatever you like to make both yourself and your passengers relaxed.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

The Latest Tutorial on a 2006 2007 2008 2009 2010-2012 VW Volkswagen Magotan GPS Car Radio Replacement with Bluetooth CD DVD Player

If you are not satisfied with your factory radio since its GPS function is not accurate and advanced enough, you can consider replace it with a brand new multifunctional car radio.If you own a     and plan to upgrade your factory radio for getting access advanced GPS function and other modern features, then you can carefully read the following 2006 2007 2008 2009 2010-2012 VW Volkswagen Magotan car radio installation steps. Wish these steps can be helpful for you to some degree.

2006 2007 2008 2009 2010-2012 VW Volkswagen Magotan GPS Car Radio after installation

2006 2007 2008 2009 2010-2012 VW Volkswagen Magotan GPS Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2006 2007 2008 2009 2010-2012 VW Volkswagen Magotan car radio installation steps

1. Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

13. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

14. Connect the Seicane car radio to your original car radio’s plugs.

15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car radio into the dash.

17. Put everything into their original place.

 

Wish you can learn something useful from the above installation instruction. If you meet any problems you don’t know how to deal with, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, firstly you have to pick an ideal car radio. If you have no ideas, you can refer to the following link which is a remarkable 2006 2007 2008 2009 2010-2012 VW Volkswagen Magotan car radio from Seicane. For more details, please click:

https://www.seicane.com/2006-2012-vw-volkswagen-magotan-hd-touch-screen-android-dvd-player-navigation-support-radio-rearview-camera-3g-wifi-bluetooth-mirror-link-obd2-dvr-steering-wheel-control-s6920

This car radio’s operation system has been upgraded to the advanced and stable Android 7.1 version and it has a powerful quad-core CPU processor as well as 2GB RAM. Besides, integrated with a wide range of practical and entertainment features, this car radio can be regarded as the best replacement for your factory radio.

The worldwide real-time GPS navigation system is specially built in this unit, so you can easily know your current locations and find the most suitable way to reach your desired destinations according to turn-by-turn directions and voice prompts.

Besides, thanks to the wireless Bluetooth technology, this unit enables you to dial, answer, reject and mute hands-free phone calls as well as streaming music from your mobile phone and listen to it as long as you synchronize your Bluetooth-enabled mobile phone with this car radio, which bring you a lot of convenience and enjoyment.

If you like this unit, just add it to your shopping cart. Good luck to you!

Posted in Uncategorized. Tagged with .

How to Install a 2009 2010 2011 2012 2013 Skoda Yeti Car Stereo Audio with Bluetooth GPS Navigation System

With a remarkable car radio installed in your car, your in-car life will be greatly taken up a notch. And nowadays, more and more car owners are trying to replace their factory radio with a new aftermarket car radio so as to get access to a lot of upgraded and modern features. This article is mainly about introducing a 2009 2010 2011 2012 2013 Skoda Yeti car radio installation instruction from Seicane with you. If you also own the same or similar dashboard and plan to upgrade your factory radio, you can refer to this instruction carefully.

2009 2010 2011 2012 2013 Skoda Yeti Car Stereo after installation

2009 2010 2011 2012 2013 Skoda Yeti Car Stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2009 2010 2011 2012 2013 Skoda Yeti car radio installation instruction

1. Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

13. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

14. Connect the Seicane car radio to your original car radio’s plugs.

15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car radio into the dash.

17. Put everything into their original place.

 

Wish the above installation can be helpful for you. If you have any problems, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you still think it hard to install the new car radio, you can directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio. If you have no ideas, you can check out the following link which is a 2009 2010 2011 2012 2013 Skoda Yeti car radio from Seicane. For more details, please click:

https://www.seicane.com/2009-2013-skoda-yeti-android-gps-navigation-system-radio-stereo-with-bluetooth-dvd-player-obd2-dvr-hd-touch-screen-rearview-camera-3g-wifi-mirror-link-s6920

Loaded with the stable Android 7.1 operation system and a powerful quad-core CPU processor as well as 2GB RAM, this car radio will greatly facilitate the operation and provide users with the best service because of its enhanced and improved capability and performance.

With the assistance of the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system, you are able to know where you are currently and navigate to any locations you would like to go to. And this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

Besides, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to your favorite music streaming from your phone music play list, which can add both convenience and enjoyment to your in-car life.

Wish you enjoy your driving experienced accompanied by this car radio. Good luck to you!

Posted in Uncategorized. Tagged with .

How to Replace a 2003 2004 2005 2006 2007-2011 Audi A3 S3 Car Radio with Aftermarket DVD Navigation System DVD Player

There is no denying that more and more measures you can take to upgrade your car’s capabilities. As far as I am concerned, one of the most popular and effective ways is to install a new multifunctional car radio to replace your factory radio in your car. With an ideal car radio installed in your car, you can gain a lot of convenience and enjoyment so as to enrich your in-car life. If you own a 2003 2004 2005 2006 2007-2011 Audi A3 S3 and plan to upgrade your factory radio, you can refer to the following 2003 2004 2005 2006 2007-2011 Audi A3 S3 car radio installation guide from Seicane. Wish it is helpful for you.

2003 2004 2005 2006 2007-2011 Audi A3 S3 Car Radio after installation

2003 2004 2005 2006 2007-2011 Audi A3 S3 Car Radio after installation

Here are some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2003 2004 2005 2006 2007-2011 Audi A3 S3 car radio installation guide

1. There are four removal slots in the stereo.

There are four removal slots in the stereo

There are four removal slots in the stereo

2. Prepare four removal keys like what is shown in the picture below.

Prepare four removal keys like what is shown in the picture below

Prepare four removal keys like what is shown in the picture below

3. Insert the release keys into the holes of the stereo. Please make sure that you put the key with the flat side facing the outside of the stereo.

4. Pull outwards to release the stereo.

5. Disconnect the connectors andcables at the back of the stereo

6. Check all the accessories for the new Seicane car stereo.

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

That’s all about how to remove and install a 2003 2004 2005 2006 2007-2011 Audi A3 S3 car radio. If you meet any problems and don’t know how to deal with them, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to install the new car radio, you can directly go to a car radio upgrade center and have the new car radio installed by a professional technician. Anyway, before installation, please confirm that you’ve already got an ideal car radio. If you don’t have a suitable car radio, here I’d like to share an amazing 2003 2004 2005 2006 2007-2011 Audi A3 S3 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/oem-android-hd-touchscrenn-car-radio-head-unit-for-2003-2011-audi-a3-s3-dvd-player-gps-navigation-bluetooth-wifi-support-mirror-link-usb-dvr-1080p-video-steering-wheel-control-s018796

Loaded with the advanced and stable Android 7.1 operation system and a powerful quad-core CPU processor, this car radio from Seicane can be regarded as one of the best replacements for your factory radio. With this car radio installed in your car, almost all your different needs can be met since it comes with a wide range of comprehensive features, mainly including 3D GPS navigation, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, file management, USB &SD card connection, etc.

With the assistance of the worldwide real-time GPS navigation system, you can easily know your current locations and find the right way to reach your desired destinations through the turn-by-turn directions and voice prompts. Besides, this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

Wish you like this unit and enjoy your relaxing trip. Good luck!

Posted in Uncategorized. Tagged with .

Essential Tutorial on a 2011- Hyundai Accent WIT Hatchback Car Radio Stereo

If you plan to have a self-driving trip around an unfamiliar city with your families or friends, it is essential for you to own a powerful car radio which comes with precise GPS navigation system. If your old factory radio cannot support GPS function or its GPS function is not advanced enough, you can replace your factory radio with a modern car radio. And here I would like to share a 2011- Hyundai Accent WIT Hatchback car radio installation guide from Seicane with you, which can be taken as your reference.

2011- Hyundai Accent WIT Hatchback Car Radio after installation

2011- Hyundai Accent WIT Hatchback Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2011- Hyundai Accent WIT Hatchback car radio installation guide

1. Pry the edges of the panel with a lever.

Pry the edges of the panel with a lever

Pry the edges of the panel with a lever

2. Remove the panel with your hands.

Remove the panel with your hands

Remove the panel with your hands

3. Disconnect the connectors at the back of the panel.

Disconnect the connectors at the back of the panel

Disconnect the connectors at the back of the panel

4. Unscrew four screws holding the original radio in place with a screwdriver.

Unscrew four screws holding the original radio in place with a screwdriver

Unscrew four screws holding the original radio in place with a screwdriver

5. Take the original radio out of the dash with your hands.

Take the original radio out of the dash with your hands

Take the original radio out of the dash with your hands

6. Disconnect the connectors at the back of the original radio.

Disconnect the connectors at the back of the original radio

Disconnect the connectors at the back of the original radio

7. Check all the accessories for the new Seicane car stereo.

8. Connect the harnesses to the back of the new Seicane car stereo.

9. Connect the Seicane car stereo to your original car radio’s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place.

 

Wish the above installation guide can be helpful for you to some extent. If you encounter any problems that you don’t know how to deal with, you can turn to your dealer or a professional for help. Or you can directly arrange a professional technician to help you install the new car radio if you are afraid of making damage to either your car radio or your car. Moreover, to help you select an ideal car radio, here I would like to share a remarkable 2011- Hyundai Accent WIT Hatchback car radio from Seicane with you. For more details, please click:

https://www.seicane.com/touchscreen-2011-hyundai-accent-wit-hatchback-android-radio-bluetooth-gps-navigation-system-with-4g-wifi-steering-wheel-obd2-control-mirror-link-s18hy216

Based on the advanced and stable Android 7.1 operation system and a high-quality quad-core 1.6GHz RK PX3 processor, this unit can provide you with a brand new operation experience.

With this car radio installed in your car, you can freely get access to a lot of comprehensive features, mainly including 3D GPS navigation system, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, file management, etc.

With the assistance of turn-by-turn directions and voice prompts provided by the advanced worldwide real-time GPS navigation system of high accuracy, you can easily know where you are now and find the right way to reach your destinations. And while navigating, you can freely listen to your favorite music thanks to this unit’s dual zone function.

What are you waiting for? Just take this unit and enjoy the fun brought by it in your car. Good luck!

Posted in Uncategorized. Tagged with .