Monthly Archives: January 2018

How to install a 2004 2005 2006 2007 2008-2009 Mazda 3 Car Stereo with Bluetooth GPS

Do you want to create a more convenient and comfortable environment as well as embrace a wonderful driving experience? If your answer is “yes”, then it is absolutely necessary for you to replace your factory radio with a brand new multifunctional car stereo. This article aims to introduce a 2004 2005 2006 2007 2008-2009 Mazda 3 car stereo installation guide. If you have the same or similar dashboard, you can carefully read this article and follow the guide to deal with your installation.

2004 2005 2006 2007 2008-2009 Mazda 3 Car Stereo after installation

2004 2005 2006 2007 2008-2009 Mazda 3 Car Stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004 2005 2006 2007 2008-2009 Mazda 3 car stereo installation guide

1. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

Remove the trim panel with a plastic removal tool

2. Remove two screws that fixed the car radio on the dashboard.

Remove two screws that fixed the car radio on the dashboard

Remove two screws that fixed the car radio on the dashboard

3. Take out the original car radio.

Take out the original car radio

Take out the original car radio

 

4. Unplug connectors at the back of the original car radio.

Unplug connectors at the back of the original car radio

Unplug connectors at the back of the original car radio

 

 

5. Check all the accessories for the new Seicane car stereo.

6. Connect the harnesses to the back of the new Seicane car stereo.

7. Connect the Seicane car stereo to your original radio’s plugs.

8. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car stereo into the dash.

10. Put everything into their original place. All the installation is done.

 

Don’t worry if you come across any problems before or during the installation process. To solve these problems, you can consult your dealer, communicate with someone experienced or turn to a professional for help. Anyway, before installation, please check if your new car stereo can fit your beloved car. If not, you’d better quit it and select another suitable one. Here I would like to recommend a remarkable 2004 2005 2006 2007 2008-2009 Mazda 3 car stereo from Seicane to you. You might as well check out the following link for more information.

https://www.seicane.com/oem-2004-2009-mazda-3-android-hd-touchscreen-touchscreen-dvd-gps-radio-bluetooth-obd2-dvr-rearview-camera-1080p-steering-wheel-control-wifi-s32791

This car stereo is running on the stable Android6.0 operation system and a strong 8 – Core 1.5 GHz Coretex-A53 processor to facilitate the operation and enhance performance for you to enjoy your driving experience.

With this powerful car stereo installed in your car, you can get access to a lot of comprehensive features, mainly including 3D GPS navigation, FM/AM radio tuner, DVD player, Bluetooth hands-free calls, Bluetooth streaming music, USB/ SD card connection, AUX, steering wheel, etc.

By taking full advantage of the high-end 3D GPS navigation function, you can know your current locations quickly and find the shortcut or right way to reach your desired destinations through turn-by-turn directions and voice prompts. What’s more, you won’t feel bored while driving because this unit’s dual zone function allows you to play music while navigating.

What are you waiting for? Just keep this great car stereo along with you. Good luck!

Posted in Uncategorized. Tagged with .

How to Effectively Install a 2014 2015 Skoda Octavia Car Radio with Bluetooth GPS Navigation System

If you have a 2014 2015 Skoda Octavia, you may be familiar with the following image which is actually a brand new multifunctional 2014 2015 Skoda Octavia car radio from Seicane after installation. If you have some related installation experience and also plan to replace your factory radio with a new car radio on your own, then you can find a related installation guide to help you. The following is a 2014 2015 Skoda Octavia car radio installation guide which can be taken as your reference.

2014 2015 Skoda Octavia Car Radio after installation

2014 2015 Skoda Octavia Car Radio after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2014 2015 Skoda Octavia car radio installation guide

1. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

Remove the trim panel with a plastic removal tool

 

 

 

 

2. Remove four screws that fixed the radio on the dashboard.

Remove four screws that fixed the radio on the dashboard

Remove four screws that fixed the radio on the dashboard

 

3. Softly release the original radio and take it out.

Softly release the original radio and take it out

Softly release the original radio and take it out

 

4. Unplug the connectors and cables at the back of the original radio.

Unplug the connectors and cables at the back of the original radio

Unplug the connectors and cables at the back of the original radio

 

5. Check all the accessories for the new Seicane car radio.

6. Connect the harnesses to the back of the new Seicane car radio.

7. Connect the Seicane car radio to your original radio’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Wish you can get some help from the above installation guide. If you meet any difficulties and don’t know how to overcome hem, please feel free to consult your dealer, communicate with someone experienced or a professional. Or you can directly arrange a professional to help you install the new car radio. However, if you haven’t got an ideal car radio for your beloved car yet, I’d like to recommend a 2014 2015 Skoda Octavia car radio from Seicane to you. For more details, please click:

https://www.seicane.com/cheap-8-inch-android-2014-2015-skoda-octavia-radio-removal-with-gps-car-multimedia-system-1024-600-multi-touch-capacitive-screen-bluetooth-dvd-3g-wifi-aux-obd2-mirror-link-hd-1080p-usb-sd-backup-camera-canbus-s128404e

 

 

With this amazing car radio installed in your car, you are able to have a much smoother and faster operation experience since this car radio is running on the latest Android 6.0 operation system and a powerful 8-core CPU processor.

With the assistance of the high-end 3D GPS navigation system, you are able to quickly know your current locations and find the right way to get to reach your destinations through turn-by-turn directions and voice prompts. Besides, thanks to this unit’s dual zone function, you are able to freely enjoy splendid music from radio, AV, DVD, TV etc under GPS mode, and the music will automatically switch to GPS voice while driving.

Moreover, the wireless Bluetooth module is specially built in to make it possible for you to dial, answer, reject and mute hands-free calls as well as listen to streaming music from your phone without keeping your hands off the steering wheel if you pair your Bluetooth-enabled mobile phone with this unit.

Wish you like this modern all-in-one unit. Good luck to you!

Posted in Uncategorized. Tagged with .

Quick Steps on a 2003 2004 2005 2006 2007- 2009 Kia Cerato GPS Bluetooth DVD Car Radio Removal and Installation

As technology rapidly improves at present, you may find that although your factory radio can play CD disks and radio to relax or refresh you sometimes, it cannot be compatible with other some advanced features like GPS and Bluetooth function, thus it cannot meet your most needs. Under this circumstance, it is wise of you to replace your factory radio with a new aftermarket car radio. And if you want to finish the whole process by yourself, you can search for a related installation guide to help you. Today I would like to share a 2003 2004 2005 2006 2007- 2009 Kia Cerato car radio installation guide from Seicane with you. Wish you can get some help from it.

2003 2004 2005 2006 2007- 2009 Kia Cerato GPS Bluetooth DVD Car Radio after installation

2003 2004 2005 2006 2007- 2009 Kia Cerato GPS Bluetooth DVD Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2003 2004 2005 2006 2007- 2009 Kia Cerato car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Use a plastic removal tool to remove the panel and unplug the connectors at the back.

Use a plastic removal tool to remove the panel and unplug the connectors at the back

Use a plastic removal tool to remove the panel and unplug the connectors at the back

3. Unscrew screws that fixed the radio on the dashboard.

Unscrew screws that fixed the radio on the dashboard

Unscrew screws that fixed the radio on the dashboard

4. Gently pull out the original radio.

Gently pull out the original radio

Gently pull out the original radio

5. Disconnect the connectors and cables at the back.

Disconnect the connectors and cables at the back

Disconnect the connectors and cables at the back

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

That’s the whole removal and installation process of a 2003 2004 2005 2006 2007- 2009 Kia Cerato car radio. If there are any problems you cannot deal with independently, you can turn to your dealer or a professional for help. But if you still think the whole upgrade process is too complicated for you, you can directly arrange a technician to help you install the new car radio.

Anyway, before installation, please confirm that you’ve already got an ideal car radio. If not, you might as well check out the following link which is an amazing 2003 2004 2005 2006 2007- 2009 Kia Cerato car radio from Seicane.

https://www.seicane.com/oem-2003-2009-kia-cerato-android-hd-touchscreen-dvd-gps-radio-mirror-link-bluetooth-obd2-dvr-rearview-camera-1080p-3g-wifi-steering-wheel-control-s32742

This car radio, based on the advanced Android 6.0 operation system and a high-quality 8 – Core 1.5 GHz Coretex-A53 processor, is advanced enough to be an ideal replacement for your factory radio.

When you drive around an unfamiliar place, taking advantage of the high-end 3D GPS navigation function makes it easier for you to quickly locate where you are and accurately navigate to your desired destinations through turn-by-turn direction and voice prompts. And additionally, you can also listen to your favorite music while navigating thanks to this unit’s dual zone function.

Additionally, the wireless Bluetooth technology enables you to connect your Bluetooth-enabled mobile phone to this car radio, so you can dial, receive, reject or mute Bluetooth hands-free calls as well as listen to streaming music from your phone music playlists, which can make your trip be full of both convenience and enjoyment

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

How to Replace a 2010 2011 2012 2013 Skoda Superb GPS Bluetooth Car Radio with Stereo Audio Speakers in a Relatively Inexpensive Way

Can you believe it? An ideal car radio can not only guide you to your destinations with its accurate direction but also bring you a lot of fun at the same time? Since most car radios are with plug and play features, you can also try to remove your factory radio and install the new car radio on your own. The following is a 2010 2011 2012 2013 Skoda Superb car radio installation instruction from Seicane. If you have the same or similar dashboard and plan to replace your factory radio, you can refer to the following instruction.

2010 2011 2012 2013 Skoda Superb GPS Bluetooth Car Radio after installation

2010 2011 2012 2013 Skoda Superb GPS Bluetooth Car Radio after installation

Please notice before the installation:

1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2. A lever and a screwdriver need to be prepared before the installation.

3. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2010 2011 2012 2013 Skoda Superb car radio installation instruction

1. Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

13. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

14. Connect the Seicane car radio to your original car radio’s plugs.

15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car radio into the dash.

17. Put everything into their original place.

 

Wish you can learn some skills from the above installation steps. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you still think it hard for you to finish the whole installation process by yourself, you can directly go to a car radio upgrade center and arrange a professional technician to help install the new car radio.

To help you select an ideal car radio for your car, here I’d like to share a remarkable 2010 2011 2012 2013 Skoda Superb car radio from Seicane with you for your reference.

https://www.seicane.com/aftermarket-android-gps-dvd-player-car-audio-system-for-2010-2013-skoda-superb-with-mirror-link-obd2-dvr-3g-wifi-radio-backup-camera-hd-touch-screen-bluetooth-s6920

This car radio is running on the most advanced Android 7.1 operation system and a strong quad-core CPU processor to enhance and improve its capabilities and performance.

Even you don’t have good sense of directions in daily life, with the assistance of the high-end 3D GPS navigation system, you can easily locate where you are and navigate to any locations you would like to go to according to turn-by-turn directions and voice prompts. And this unit comes with dual zone function which enables you to listen to your favorite music while navigating.

Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this unit so as to get access to Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone playlist.

Wish you have a nice trip accompanied by this intelligent car radio. Good luck!

Posted in Uncategorized. Tagged with .

A Common Way to Upgrade a 2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 Car Radio with Bluetooth GPS Navigation DVD Player

Believe it or not, to install a remarkable all-in-one car radio for your car will bring your great convenience and enjoyment during driving. Therefore, more and more car owners would like to replace their old factory radio with a new aftermarket car radio. If you also want to upgrade your factory radio, you can find a related installation guide to help you. The following is a 2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide carefully.

2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 Car Radio after installation

2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 Car Radio after installation

Before and during installation, you should notice:

1. Before connecting,please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire,so when replace the fuse, please consult the professional.

7. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 car radio installation guide

1. Remove the padded covers from the two sides of the lower section at the center of the dash.

Remove the padded covers from the two sides of the lower section at the center of the dash

Remove the padded covers from the two sides of the lower section at the center of the dash

1-1

1-1

2. Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover.

Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover

Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover

3. Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards.

Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards

Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards

4. Carefully remove the top cover by using a plastic flat removal tool.

5. Remove the air conditioning vents, and then disconnect the temperature control wires.

Remove the air conditioning vents, and then disconnect the temperature control wires

Remove the air conditioning vents, and then disconnect the temperature control wires

6. Remove the radio fascia and disconnect the wires at the back of it.

Remove the radio fascia and disconnect the wires at the back of it

Remove the radio fascia and disconnect the wires at the back of it

7. Pull out the lower segment containing the ashtray and power outlets.

8. Remove the air conditioning control and display section and its wiring connector.

Remove the air conditioning control and display section and its wiring connector

Remove the air conditioning control and display section and its wiring connector

9. Remove screws that fix the radio on the dashboard.

10. Disconnect the connectors at the back of the radio.

11. Check all the accessories for the new Seicane car radio.

12. Connect the harnesses to the back of the new Seicane car radio.

13. Connect the Seicane car radio to your original radio’s plugs.

14. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

15. Put the new Seicane car radio into the dash.

16. Put everything into their original place.

 

Wish the above installation guide can do some help for your upgrading. If you have any doubts, you can turn your dealer or a professional for help. Or you can ask someone experienced to help you alongside. Besides, to help your better choose a suitable car radio for your car, I’d like to share a remarkable 2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/oem-android-dvd-player-for-2004-2016-toyota-land-cruiser-lc200-radio-replacement-with-touch-screen-gps-car-stereo-bluetooth-music-mirror-link-obd2-3g-wifi-video-backup-camera-s18t265

This unit is upgraded to the most advanced Android 7.1.2 operation system and a high-quality quad-core CPU processor, so you can enjoy its higher configuration and better performance.

With the worldwide real-time GPS navigation system built in this unit, you can easily locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. And while navigating, you can also listen to radio, USB or SD card music playback thanks to this unit’s dual zone function.

And under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this car radio so as to get access to Bluetooth hands-free calls and Bluetooth streaming music which can bring you both convenience and joyfulness during driving.

Wish you like it and good luck to you!

Posted in Uncategorized. Tagged with .

A Step-by-step Installation Guide on a 2013 2014 Toyota COROLLA Car Radio with Bluetooth GPS Navigation DVD Player

Nowadays, some car owners are trying to improve their in-car environment so as to enjoy a more relaxing driving experience. The whole removal and installation process will be not difficult to finish if they have a detailed installation guide. The following is an installation guide on a 2013 2014 Toyota COROLLA car radio from Seicane. If you have the same or similar dashboard, you can refer to this guide.

2013 2014 Toyota COROLLA Car Radio after installation

2013 2014 Toyota COROLLA Car Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2013 2014 Toyota COROLLA car radio installation guide

1. Pry off the vent panel with a plastic tool and pull it out and set it aside.

Pry off the vent panel with a plastic tool and pull it out and set it aside

Pry off the vent panel with a plastic tool and pull it out and set it aside

2. Pry down the trim panel as the picture shows, then disconnect the harness on one side of the trim panel.

Pry down the trim panel as the picture shows, then disconnect the harness on one side of the trim panel

Pry down the trim panel as the picture shows, then disconnect the harness on one side of the trim panel

3. Remove two 10mm bolts marked in red as the picture shows. Then do the same on the left side.

Remove two 10mm bolts marked in red as the picture shows. Then do the same on the left side

Remove two 10mm bolts marked in red as the picture shows. Then do the same on the left side

4. Gently pull out the radio and watch out the harnesses behind it.

Gently pull out the radio and watch out the harnesses behind it

Gently pull out the radio and watch out the harnesses behind it

5. Disconnect harnesses behind the original radio.

Disconnect harnesses behind the original radio

Disconnect harnesses behind the original radio

6. Check all the accessories for the new Seicane car stereo.

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original car radio’s plugs.

9. Put the new Seicane stereo into the dash.

10. Turn on the new Seicane stereo and check whether the unit is working properly.

11. If everything is OK, firm four removed bolts that are put aside, then make the trim panel back on your new unit. If not, please check whether all the cables are connected correctly.

 

Wish the above installation guide can be helpful for you. If you have any doubts, please feel free to consult your dealer, communicate with someone experienced or turn to a professional technician. Or you can directly ask a professional technician to help you install the new car radio. If you are still looking for a suitable car radio, here I would like to recommend a great 2013 2014 Toyota COROLLA car radio from Seicane to you. For more details, please click:

https://www.seicane.com/2013-2014-toyota-corolla-android-radio-dvd-player-navigation-system-bluetooth-hd-1024-600-touch-screen-head-unit-with-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-usb-sd-ipod-mirror-link-s167019

This car radio comes with built-in worldwide real-time GPS navigation system, which enables you to locate where you are and reach any locations you would like to go to through turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating.

What’s more, hands-free calls and streaming music are both supported as long as you connect your Bluetooth-enabled mobile phone to this car radio, which can effectively ensure your safety and convenience.

If you like this car radio, just add it to your shopping cart. Good luck to you!

Posted in Uncategorized. Tagged with .

The Easy Installation Guide on a 2010 Kia Ceed Car Stereo Radio Sound System Upgrade

Don’t you think your factory radio is not up-to-date enough to meet your various needs in car with the continuous upgrade of a ca radio? Under this circumstance, it is suggested that you should remove your factory radio and install a brand new multifunctional car radio for your car. The following is a 2010 Kia Ceed car radio installation instruction from Seicane. If you own the same or similar dashboard, you can refer to this instruction carefully.

2010 Kia Ceed Car Stereo Radio after installation

2010 Kia Ceed Car Stereo Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2010 Kia Ceed car radio installation instruction

1. Pry around the edges of the trim panel with a lever.

Pry around the edges of the trim panel with a lever

Pry around the edges of the trim panel with a lever

2. Remove the trim panel.

Remove the trim panel

Remove the trim panel

3. Disconnect all the connectors of the trim panel.

Disconnect all the connectors of the trim panel

Disconnect all the connectors of the trim panel

4. Unscrew all the screws holding the original car radio in place with a screwdriver.

Unscrew all the screws holding the original car radio in place with a screwdriver

Unscrew all the screws holding the original car radio in place with a screwdriver

5. Gently take the original car radio out of the dashboard.

Gently take the original car radio out of the dashboard

Gently take the original car radio out of the dashboard

6. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio

Disconnect all connectors at the back of the original car radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

That’s the whole removal and installation processor of a 2010 Kia Ceed car radio. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly go to a car radio upgrade center and ask a professional technician to help you install the new ca radio.

As for the selection of an ideal car radio, if you have no ideas, you can check out the following link which is a wonderful 2010 Kia Ceed car radio from Seicane.

https://www.seicane.com/2010-kia-ceed-android-radio-gps-navigation-with-bluetooth-hd-touchscreen-mirror-link-rearview-camera-1080p-steering-wheel-control-3g-wifi-obd2-s32744

Based on the intelligent Android 7.1 operation system, a powerful quad-core CPU processor and 2GB RAM, this car radio can promise you a super stable running environment and a smooth operation experience.

Thanks to turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to quickly locate where you are and accurately go to your ideal destinations. Additionally, this car radio comes with dual zone function which allows you to listen to your favorite music while navigating.

What’s more, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you are able to dial, answer, reject and mute hands-free phone calls as well as Bluetooth streaming music without taking your hands off the steering wheel. Therefore, you will gain a lot of convenience and enjoyment during driving.

If you like this unit, just add it to your shopping cart right now. Good luck!

Posted in Uncategorized. Tagged with .

How to Upgrade a 2006 2007 2008 2009 2010-2012 Hyundai SANTA FE Car Radio with Bluetooth GPS Navigation Proficiently

Nowadays you can see that there are more and more options you can choose to upgrade your car’s capabilities and performance. And one of the most popular ways is to remove your factory radio and install a brand new multifunctional car radio in your car. With such an ideal car radio in your car, you can get access to a wide range of practical and entertainment features so as to enrich your in-car life. The following is a 2006 2007 2008 2009 2010-2012 Hyundai SANTA FE car radio installation guide from Seicane, which can be taken as reference for you if you have the same or similar dashboard.

2006 2007 2008 2009 2010-2012 Hyundai SANTA FE Car Radio after installation

2006 2007 2008 2009 2010-2012 Hyundai SANTA FE Car Radio after installation

Before and during installation, you should notice:

1. Before connecting,please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire,so when replace the fuse, please consult the professional.

7. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006 2007 2008 2009 2010-2012 Hyundai SANTA FE car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

That’s all about how to remove and install a 2006 2007 2008 2009 2010-2012 Hyundai SANTA FE car radio. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to remove and install the car radio, you can directly go to a car radio upgrade center to arrange a professional technician to help you install the new car radio.

To help you select an ideal car radio for your beloved car, here I would like to share a remarkable  2006 2007 2008 2009 2010-2012 Hyundai SANTA FE car radio from Seicane with you. For more details, please click:

https://www.seicane.com/2006-2012-hyundai-santa-fe-aftermarket-android-hd-touch-screen-navigation-system-dvd-player-radio-bluetooth-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-ipod-steering-wheel-control-gps-usb-sd-mirror-link-s167027

This car radio is running on the most advanced Android 7.1 operation system and a powerful quad-core CPU processor to enhance its enhance its capabilities and performance. Therefore, you will be able to embrace much smoother, faster and easier operation system.

With this car radio installed in your car, you are able to get access to a lot of practical and entertainment features, mainly including high-end 3D GPS navigation system, DVD player, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, AUX, file management, etc. Thanks to these features, you are able to have a more convenient and relaxing driving experience.

With the assistance of the high-end 3D GPS navigation system, you are able to locate where you are and find the right way to reach any locations you would like to go to according to turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

If you like this unit, just add it to your shopping cart. Good luck to you!

Posted in Uncategorized. Tagged with .