Monthly Archives: November 2017

How to Install a 2005 2006 2007 2008 2009-2010 Chrysler Sebring Aspen 300C Cirrus GPS Bluetooth Car Stereo with DVD player Touch Screen

What would you do if you would like to replace your factory radio with a brand new car radio but don’t have some knowledge on the installation. In that case, you can find a related car radio installation instruction and follow it to deal with the installation. This article is mainly about how to remove the factory radio and install a new car radio for 2005 2006 2007 2008 2009-2010 Chrysler Sebring Aspen 300C Cirrus. If you have the same or similar dashboard, you can take the following installation instruction as a reference.

2005 2006 2007 2008 2009-2010 Chrysler Sebring Aspen 300C Cirrus GPS Bluetooth Car Stereo after installation

2005 2006 2007 2008 2009-2010 Chrysler Sebring Aspen 300C Cirrus GPS Bluetooth Car Stereo after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005 2006 2007 2008 2009-2010 Chrysler Sebring Aspen 300C Cirrus car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Remove the panel by prying the edges with a lever.

Remove the panel by prying the edges with a lever

Remove the panel by prying the edges with a lever

3. Unscrew four screws holding the original radio in place with a screwdriver.

Unscrew four screws holding the original radio in place with a screwdriver

Unscrew four screws holding the original radio in place with a screwdriver

4. Take the original radio out of the dash.

Take the original radio out of the dash

Take the original radio out of the dash

5. Disconnect the connectors at the back of the original radio.

Disconnect the connectors at the back of the original radio

Disconnect the connectors at the back of the original radio

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original car radio’s plugs.

9. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane stereo into the dash.

11. Put everything into their original place.

 

Wish you can get some help from the above installation steps. If you have any doubts, you can contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard to install the new car radio, you can directly arrange a professional technician to help you install the new car radio. Anyway, it is essential for you to select an ideal car radio for your beloved car. Here I would like to share a remarkable 2005 2006 2007 2008 2009-2010 Chrysler Sebring Aspen 300C Cirrus car radio from Seicane with you.

https://www.seicane.com/aftermarket-gps-2005-2010-chrysler-sebring-aspen-300c-cirrus-android-radio-navigation-system-wifi-usb-sd-bluetooth-dvd-player-support-digital-tv-rearview-camera-steering-wheel-control-s6933

This car radio is loaded with the intelligent pure Android 7.1 operation system and a high-quality quad-core CPU processor to enhance its capabilities and performance. So with this unit installed in your car, you will able to enjoy its smooth operation, high sensitivity and abundant interaction for the better view of your road ahead.

With the assistance of the turn-by-turn direction and voice prompts provided by the high-accuracy 3D GPS navigation system, it will be much easier for you to locate where you are now and navigate to your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Besides, this unit also comes with additional features for you to relax yourself or your passengers in car.

Wish you enjoy your relaxing trip accompanied by this car radio. Good luck!

Posted in Uncategorized. Tagged with .

How to Replace a 2006 2007 2008 2009 2010-2012 Mercedes Benz Sprinter 211 CDI 309 CDI 311 CDI 509 CDI Car Radio with Bluetooth GPS Navigation System

When taking about the installation of a new car radio, if you would like to save some money on the installation, you might as well remove the factory radio and install the new car radio by yourself. After installation, a brand new multifunctional car radio will undoubtedly bring your a brand new driving experience. If you own a 2006 2007 2008 2009 2010-2012 Mercedes Benz Sprinter 211 CDI 309 CDI 311 CDI 509 CDI and plan to replace your factory radio, you can refer to the following 2006 2007 2008 2009 2010-2012 Mercedes Benz Sprinter 211 CDI 309 CDI 311 CDI 509 CDI car radio installation instruction from Seicane I would like to share with you.

2006 2007 2008 2009 2010-2012 Mercedes Benz Sprinter 211 CDI 309 CDI 311 CDI 509 CDI Car Radio after installation

2006 2007 2008 2009 2010-2012 Mercedes Benz Sprinter 211 CDI 309 CDI 311 CDI 509 CDI Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006 2007 2008 2009 2010-2012 Mercedes Benz Sprinter 211 CDI 309 CDI 311 CDI 509 CDI car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Remove the air vent with a plastic removal tool and then put it aside.

Remove the air vent with a plastic removal tool and then put it aside

Remove the air vent with a plastic removal tool and then put it aside

3. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

Remove the trim panel with a plastic removal tool

4. Remove four screws that fixed the radio on the dashboard.

Remove four screws that fixed the radio on the dashboard

Remove four screws that fixed the radio on the dashboard

5. Take out the original car radio.

Take out the original car radio

Take out the original car radio

6. Unplug the connectors at the back of the original radio.

Unplug the connectors at the back of the original radio

Unplug the connectors at the back of the original radio

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

9. Connect the Seicane car stereo to your original radio’s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place. All the installation is done.

 

Now do you have a generally understanding of the car radio removal and installation of a a 2006 2007 2008 2009 2010-2012 Mercedes Benz Sprinter 211 CDI 309 CDI 311 CDI 509 CDI? If not, please don’t be worried. You might as browse some professional websites. Besides, you can seek help from your dealer, someone experienced or a professional technician.

What’s more, to help you reasonably select a suitable car radio, here I would like to recommend a remarkable 2006 2007 2008 2009 2010-2012 Mercedes Benz Sprinter 211 CDI 309 CDI 311 CDI 509 CDI car radio from Seicane to you. For more details, please click:

https://www.seicane.com/2006-2007-2008-2012-mercedes-benz-sprinter-211-cdi-309-cdi-311-cdi-509-cdi-android-gps-sat-nav-bluetooth-usb-wifi-car-radio-support-auto-a-v-audio-system-aux-mirror-link-1080p-video-s6909

When you driving around an unfamiliar city, even you don’t have any good sense of direction, you can depend on the high-end GPS navigation system. With its help, you can quickly and easily know your current locations and find the right way to your desired destinations through turn-by-turn direction and voice prompts.

Besides, under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this all-in-one car radio so as get access to both Bluetooth hands-free calls and Bluetooth streaming music while navigating. Moreover, this unit’s dual zone function enables you to listen to radio, USB or SD card music playback while navigating, and the music will automatically switch to GPS voice.

This car radio is at a reasonable price now. If you like this unit, just add it to your shopping cart. Good luck!

Posted in Uncategorized. Tagged with , .

Perfect Tutorial on a 2011 2012 2013 2014 2015 HYUNDAI ELANTRA/MD Car Radio with GPS Bluetooth Removal and Installation

There is no denying that an ideal car radio with high-end GPS navigation system can greatly bring you a lot of convenience to guarantee your driving safety. If your factory radio cannot support the latest map, you’d better replace it with a brand new aftermarket car radio. To help you have a general understanding of the upgrade process of a 2011 2012 2013 2014 2015 HYUNDAI ELANTRA/MD car radio, here I would like to introduce the related car radio installation guide from Seicane to you. Wish it is helpful for you.

2011 2012 2013 2014 2015 HYUNDAI ELANTRAMD Car Radio after installation

2011 2012 2013 2014 2015 HYUNDAI ELANTRAMD Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011 2012 2013 2014 2015 HYUNDAI ELANTRA/MD car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Remove the trim panel surround the car radio with a plastic knife.

Remove the trim panel surround the car radio with a plastic knife

Remove the trim panel surround the car radio with a plastic knife

2-1

2-1

2-2

2-2

3. Remove six screws that fixed the main panel.

Remove six screws that fixed the main panel

Remove six screws that fixed the main panel

4. Loose the main panel and remove it softly with a plastic knife.

Loose the main panel and remove it softly with a plastic knife

Loose the main panel and remove it softly with a plastic knife

4-1

4-1

5. Remove 4 screws that fixed the car radio on the dashboard.

Remove 4 screws that fixed the car radio on the dashboard

Remove 4 screws that fixed the car radio on the dashboard

6. Gently pull out the original car radio. Then unplug the connectors at the back of the factory radio.

Gently pull out the original car radio. Then unplug the connectors at the back of the factory radio

Gently pull out the original car radio. Then unplug the connectors at the back of the factory radio

6-1

6-1

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

9. Connect the Seicane car stereo to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Don’t be worried if you have any doubts about the above installation steps. In that case, you might as well seek help from your dealer, someone experienced or a professional. And if you still think it hard to remove the factory radio and install the new car radio by yourself, you can directly go to a car radio upgrade center and have the new car radio installed by a professional technician. Anyway, before installation, please check whether your new car radio can work well with your car or not. If not, you may refer to the following link which is about a 2011 2012 2013 2014 2015 HYUNDAI ELANTRA/MD car radio from Seicane. For more information, please click:

https://www.seicane.com/android-hd-touch-screen-radio-for-2011-2015-hyundai-elantra-md-with-gps-navigation-system-bluetooth-usb-wifi-obd2-tpms-mirror-link-rearview-camera-s18hy071

Upgraded to the most advanced Android 7.1 operation system and a powerful quad-core 1.6GHz RK-PX3 CPU processor, this intelligent car radio can be regarded as one of your best choices to replace your factory radio.

With this car radio installed in your car, it will be possible for you to get access to a wide range of features, mainly including 3D GPS navigation function, FM/AM radio, Bluetooth hands-free calls, Bluetooth streaming music, USB or SD card connection, file management, etc, which can meet your different needs in car.

With the assistance of the worldwide real-time GPS navigation system of high accuracy, you are able to get access to voice cues, distance information, POIs and route planning all the way, therefore, you will be able to know your current locations and navigate to your desired destinations. And while navigating, you can also freely listen to your favorite music thanks to dual zone function.

What are you waiting for? If you like this unit, just add it to your shopping cart right now. Good luck to you!

Posted in Uncategorized. Tagged with .

How to Install an One DIN Universal Touch Screen Radio Stereo Systems in a Best Way

What actions would you like to take so as to create a more convenience and convenient environment as well as gain an excellent driving experience? As far as I am concerned, one of the best and most effective ways is to replace your mono-functional car radio with a brand new multifunctional car radio. The following is a One DIN Universal car radio installation guide from Seicane. If you happen to own the same car model, you can follow this guide to help with the car radio installation.

One DIN Universal Touch Screen Radio after installation

One DIN Universal Touch Screen Radio after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

One DIN Universal car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Wish you can get some inspiration from the above installation guide. To solve any problems you meet in the installation, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. If you are still looking for an ideal car radio but don’t have any ideas, here I would like to recommend an amazing One DIN Universal car radio from Seicane to you. For more details, please click:

https://www.seicane.com/1-din-universal-hd-touch-screen-android-car-stereo-dvd-player-gps-navigation-system-bluetooth-3g-wifi-support-obd2-dvr-rearview-camera-tv-mirror-link-steering-wheel-control-usb-s7102

This in-dash car radio is especially designed for you to replace your factory radio. It is running on the advanced and stable Android 6.0 operation system and a high-quality quad-core CPU processor.

Even though you have no good sense of directions, through the turn-by-turn directions and voice prompts provided by the built-in GPS navigation system provided by the high-end 3D GPS navigation system, you are able to know your current locations and navigate to your desired destinations no matter you are driving around. And while navigating, you can freely listen to your favorite music thanks to this unit’s dual zone function. Therefore, you can gain both convenience and joyfulness.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

How to Upgrade a 2013 2014 2015 VW Volkswagen Passat Jetta Car Radio with Touch Screen Stereo Navigation System

Do you own a 2013 2014 2015 VW Volkswagen Passat Jetta and think your factory radio is too outdated to be compatible with a wide range of practical and entertainment features? If yes, it will be a great choice for you to think about replacing your factory radio with a new aftermarket car radio. And you might as well find a related installation guide to have a general understanding of the car radio installation. The following is a 2013 2014 2015 VW Volkswagen Passat Jetta car radio installation guide from Seicane. Wish it can be helpful for you.

2013 2014 2015 VW Volkswagen Passat Jetta Car Radio after installation

2013 2014 2015 VW Volkswagen Passat Jetta Car Radio after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2013 2014 2015 VW Volkswagen Passat Jetta car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Please make clear every detailed step before installation. If you have any doubts, please don’t be hesitated to consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can arrange a professional technician to help you install the new car radio directly. And to help you choose a suitable car radio, here I would like to recommend a remarkable 2013 2014 2015 VW Volkswagen Passat Jetta car radio from Seicane to you. For more details, please click:

https://www.seicane.com/full-touchscreen-2012-2015-vw-volkswagen-jetta-android-radio-gps-navigation-car-stereo-with-mirror-link-obd-4g-wifi-bluetooth-music-rearview-camera-s18v227

With this car radio installed in your car, you may find it is running on the stable Android 7.1 operation system and a powerful quad-core 1.6 GHz RK PX3 CPU processor, which can greatly smooth the operation as well as offer a stable system.

Thanks to the built-in 3D GPS navigation system of high accuracy, you can quickly locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Besides, without taking your hands off the steering wheel, hands-free calls and streaming music are both available for you as long as you connect your Bluetooth-enabled mobile phone to this car radio. Therefore, you will gain a lot of great convenience and enjoyment.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

The Useful Strategy on the Replacement of a 2005 2006 2007 2008 2009-2010 Toyota Fortuner Car Radio with Bluetooth GPS Navigation System

Are you get tired of your factory radio if your factory radio cannot be compatible with some upgraded or new features after a long-time use. Under this circumstance, you can think about replacing your factory radio with a brand new multifunctional car radio. And if  you are going to install a new car radio by yourself, you can find a detailed installation guide to help you. Now I would like to share a 2005 2006 2007 2008 2009-2010 Toyota Fortuner car radio installation guide with you for your reference.

2005 2006 2007 2008 2009-2010 Toyota Fortuner Car Radio after installation

2005 2006 2007 2008 2009-2010 Toyota Fortuner Car Radio after installation

Here are some tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2005 2006 2007 2008 2009-2010 Toyota Fortuner car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Adjust the shifter lever.

Adjust the shifter lever

Adjust the shifter lever

3. Use the plastic removal tool to remove the panel and unplug the connector behind.

Use the plastic removal tool to remove the panel and unplug the connector behind

Use the plastic removal tool to remove the panel and unplug the connector behind

3-1

3-1

4. Grab the center nob, remove it and use a screwdriver to unscrew the hidden screw.

Grab the center nob, remove it and use a screwdriver to unscrew the hidden screw

Grab the center nob, remove it and use a screwdriver to unscrew the hidden screw

4-1

4-1

5. Remove the panel with a plastic removal tool, then unplug the connectors at the back of it.

Remove the panel with a plastic removal tool, then unplug the connectors at the back of it

Remove the panel with a plastic removal tool, then unplug the connectors at the back of it

5-1

5-1

5-2

5-2

6. Remove screws that are holding the radio.

Remove screws that are holding the radio

Remove screws that are holding the radio

7. Release the clips and take out the original car radio.

Release the clips and take out the original car radio

Release the clips and take out the original car radio

7-1

7-1

8. Disconnect connectors and cables at the back of the radio.

Disconnect connectors and cables at the back of the radio

Disconnect connectors and cables at the back of the radio

9. Check all the accessories for the new Seicane car stereo.

10. Connect the harnesses to the back of the new Seicane car stereo.

11. Connect the Seicane car stereo to your original stereo’s plugs.

12. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car stereo into the dash.

14. Put everything into their original place. All the installation is done.

 

Wish the above installation steps can be helpful for you. If you have any doubts, you can browse some professional websites. Or you can seek help from your dealer, someone experienced or a professional. If you still think it hard to install the new car radio, you can directly arrange a professional technician to help you install the new car radio.

And to help you select an ideal car radio, here I would like to share an amazing 2005 2006 2007 2008 2009-2010 Toyota Fortuner car radio from Seicane to you. For more details, please click:

https://www.seicane.com/full-touchscreen-2005-2010-toyota-fortuner-android-radio-gps-bluetooth-mirror-link-tpms-obd2-dvr-rearview-camera-tv-usb-4g-wifi-s18t261

This car radio which is loaded with the latest and stable Android 7.1 operation system and a smart quad-core CPU processor to enhance its capabilities and performance, so it can be regarded as one of the best choices to replace your factory radio.

With this car radio installed in your car, you will find that you can take great advantage of a lot of comprehensive features, mainly including 3D GPS navigation system, Bluetooth hands-free call, Bluetooth streaming music, FM/AM radio tuner, steering wheel control, file management, etc. With these features, I am sure tat almost all your different needs can be met in your car.

This car radio’s built-in worldwide real-time GPS navigation system enables you to easily locate where you are and find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. And you can also freely listen to your favorite music while navigating thanks to this unit’s dual zone function.

Wish you like this unit and good luck!

Posted in Uncategorized. Tagged with .

How to Replace a 2012 2013 2014 2015 HONDA CRV Car Radio with GPS Navigation Bluetooth Function

If you are thinking about upgrading your factory radio with a new aftermarket car radio, you may think it hard for you to remove the factory radio and install the new car radio. As a matter of fact, most of car radios are plug and play, so its replacement process is not complicated at all. The following is an installation guide on a 2012 2013 2014 2015 HONDA CRV car radio. If you own the same or similar dashboard, you may take is as a reference.

2012 2013 2014 2015 HONDA CRV Car Radio after installation

2012 2013 2014 2015 HONDA CRV Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2012 2013 2014 2015 HONDA CRV car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Remove the left a/c vent by prying the edges with a lever.

Remove the left a/c vent by prying the edges with a lever

Remove the left a/c vent by prying the edges with a lever

3. Remove the right a/c vent with the same way as step 2.

Remove the right a/c vent with the same way as step 2

Remove the right a/c vent with the same way as step 2

4. Unscrew all the screws holding the original car radio in place with a screwdriver.

Unscrew all the screws holding the original car radio in place with a screwdriver

Unscrew all the screws holding the original car radio in place with a screwdriver

5. Take the original car radio out of the dash with your hands.

Take the original car radio out of the dash with your hands

Take the original car radio out of the dash with your hands

6. Disconnect the connectors at the back of the radio.

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original carradio’s plugs.

10. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane radio into the dash.

12. Put everything into their original place.

 

Don’t worry if you encounter any difficulties before or during the installation. To overcome these difficulties, you can contact your dealer, communicate with someone experienced or turn to a professional for help.

And it is essential for you to pick an ideal car radio first of all. If you have no ideas, here I would like to share an remarkable 2012 2013 2014 2015 HONDA CRV car radio from Seicane with you.

https://www.seicane.com/android-touchscreen-2013-2014-2015-honda-crv-radio-gps-navigation-system-with-4g-wifi-bluetooth-mirror-link-digital-tv-obd2-tpms-backup-camera-s18h222

This car radio runs on the intelligent and stable Android 7.1 operation system and a quad-core 1.6GHz quad-core RK PX3 CPU processor, so you will enjoy its better capabilities and performance.

With this car radio installed in your beloved car, you can get access to a lot of practical and entertainment features, mainly including GPS navigation, FM/AM radio, RDs, Bluetooth hands-free calls, Bluetooth streaming music, file management, etc.

Thanks to the worldwide real-time GPS navigation system built in this car radio, you are able to know your current locations and go anywhere without getting lost even you are in locations where you are not familiar with at all.

Besides, this car radio can offer you much more entertainment that your factory radio cannot bring to you.

Wish you like this unit and good luck!

Posted in Uncategorized. Tagged with .

How to Upgrade a 2006 2007 2008 2009 2010-2012 Toyota RAV4 GPS Bluetooth DVD Car Radio

If you have a new plan to replace your factory radio with a new aftermarket car radio, you’d better find a related installation guide to help you with the installation. This article is mainly about how to remove and install a 2006 2007 2008 2009 2010-2012 Toyota RAV4 car radio. If you happen to have the same or similar dashboard, then you can refer to the following step-by-step 2006 2007 2008 2009 2010-2012 Toyota RAV4 car radio installation instruction.

2006 2007 2008 2009 2010-2012 Toyota RAV4 GPS Bluetooth DVD Car Radio after installation

2006 2007 2008 2009 2010-2012 Toyota RAV4 GPS Bluetooth DVD Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006 2007 2008 2009 2010-2012 Toyota RAV4 car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Remove the panel by using plastic removal tool.

Remove the panel by using plastic removal tool

Remove the panel by using plastic removal tool

3. Unplug the hazard warning lights.

Unplug the hazard warning lights

Unplug the hazard warning lights

4. Remove the left panel and unplug the switch.

Remove the left panel and unplug the switch

Remove the left panel and unplug the switch

5. Unplug the switch.

Unplug the switch

Unplug the switch

6. Remove four screws.

Remove four screws

Remove four screws

6-1

6-1

7. Pull out the factory radio.

Pull out the factory radio

Pull out the factory radio

8. The back of the original car radio.

The back of the original car radio

The back of the original car radio

9. Remove 8 screws from original car radio.

Remove 8 screws from original car radio

Remove 8 screws from original car radio

9-1

9-1

10. Remove 2 screws at the top of the new radio.

Remove 2 screws at the top of the new radio

Remove 2 screws at the top of the new radio

10-1

10-1

11. Install 8 screws to new car radio.

Install 8 screws to new car radio

Install 8 screws to new car radio

12. Plug into factory plugs.

Plug into factory plugs

Plug into factory plugs

13. All plugs after connection.

All plugs after connection

All plugs after connection

13-1

13-1

14. Check all the accessories for the new Seicane car radio.

15. Connect the harnesses to the back of the new Seicane car radio.

16. Connect the Seicane car radio to your original car radio ‘s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. If the new Seicane car radio works well, put it into the dash.

19. Put everything into their original place, and all the installation is done.

 

Wish you can gain some inspiration from the above installation steps. If you comes across any problems you cannot solve independently, please feel free to seek help from your dealer, someone experienced or a professional technician. Besides, it is especially crucial for you to select an ideal car radio. If you have no ideas, you can refer to the following link which is a remarkable 2006 2007 2008 2009 2010-2012 Toyota RAV4 car radio from Seicane. Here comes the link, please click:

https://www.seicane.com/2006-2012-toyota-rav4-android-aftermarket-radio-gps-navigation-mirror-link-obd-steering-wheel-control-dvr-rearview-camera-cpu-s18t203

This car radio with a large 10.2 inch multi-touch screen comes with a wide range of practical and entertainment features which can bring you a brand new driving experience.

Thanks to the powerful worldwide real-time GPS navigation system of this unit, you will be able to easily know your current locations and find the right way to reach your desired destinations through turn-by-turn directions and voice prompts even you are travelling around an unfamiliar place.

And thanks to Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can dial, answer, reject and mute hands-free calls as well as listen to streaming music from your mobile phone.

If you like this unit, just add it to your shopping cart right now!

Posted in Uncategorized. Tagged with .

Easy-to-understand Installation Instruction on a 1998 1999 2000 2001 2002-2006 BMW 3 Series E46 M3 316i 318i 320i 323i 325i Car Radio with Bluetooth GPS Navigation System

To be honest, with a related installation instruction and some related experience, it will be not hard for you to remove your factory radio and install a new aftermarket car radio for your 1998 1999 2000 2001 2002-2006 BMW 3 Series E46 M3 316i 318i 320i 323i 325i. If you own the same or similar dashboard and also plan to replace your factory radio, you might as well refer to the following 1998 1999 2000 2001 2002-2006 BMW 3 Series E46 M3 316i 318i 320i 323i 325i car radio installation instruction from Seicane.

1998 1999 2000 2001 2002-2006 BMW 3 Series E46 M3 316i 318i 320i 323i 325i Car Radio after installation

1998 1999 2000 2001 2002-2006 BMW 3 Series E46 M3 316i 318i 320i 323i 325i Car Radio after installation

4 tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

1998 1999 2000 2001 2002-2006 BMW 3 Series E46 M3 316i 318i 320i 323i 325i car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Remove the surrounding trim panel with a plastic removal tool.

Remove the surrounding trim panel with a plastic removal tool

Remove the surrounding trim panel with a plastic removal tool

2-1

2-1

2-2

2-2

3. Remove two screws fixed the radio on the dashboard.

Remove two screws fixed the radio on the dashboard

Remove two screws fixed the radio on the dashboard

3-1

3-1

4. Gently pull out the original car radio.

Gently pull out the original car radio

Gently pull out the original car radio

5. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio

Unplug the connectors and cables at the back of the radio

6. Remove the A/C control and unplug the connectors.

Remove the A/C control and unplug the connectors

Remove the A/C control and unplug the connectors

7. Remove two screws holding the heat vent.

Remove two screws holding the heat vent

Remove two screws holding the heat vent

7-1

7-1

8. Remove screws so as to remove radio frame.

Remove screws so as to remove radio frame

Remove screws so as to remove radio frame

9. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

10. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

11. Connect the Seicane car radio to your original radio’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

 

Before installation, please make clear every detailed step. If you have any problems, please don’t be hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. Anyway, it is essential for you to select an ideal car radio which can fit your car very well. If you have no ideas, please refer to the following link which is a marvelous 1998 1999 2000 2001 2002-2006 BMW 3 Series E46 M3 316i 318i 320i 323i 325i car radio from Seicane.

https://www.seicane.com/android-autoradio-bluetooth-gps-navigation-stereo-upgrade-for-1998-2006-bmw-3-series-e46-m3-316i-318i-320i-323i-325i-wifi-usb-mirror-link-1080p-video-support-rearview-camera-dvr-tpms-auto-a-v-s6943

This all-in-one car radio from Seicane based on the intelligent and stable Android 7.1 operation system and a powerful quad-core CPU processor will become one of the best choices to replace your factory radio.

Thanks to the worldwide real-time GPS navigation system, you will be able to know where you are now and easily find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. And while navigating, you will be able to listen to your favorite music since this unit has dual zone function.

Besides, you may pair your Bluetooth-enabled mobile phone with this car radio so as to get access to both Bluetooth hands-free calls as well as listen to Bluetooth streaming music from your phone.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .