Monthly Archives: September 2017

How to Replace a 2013 2014 2015 VW Volkswagen GOLF 7 Car Radio with Radio Bluetooth GPS Navigation Function

If you are an owner of a 2013 2014 2015 VW Volkswagen GOLF 7, you can look at the following image which is a modern 2013 2014 2015 VW Volkswagen GOLF 7 car radio from Seicane after installation. If you have the same or similar dashboard, you can try to install this car radio in your car so as to upgrade your driving experience. And the following is a 2013 2014 2015 VW Volkswagen GOLF 7 car radio installation guide which can be taken as your reference.

2013 2014 2015 VW Volkswagen GOLF 7 Car Radio after installation

2013 2014 2015 VW Volkswagen GOLF 7 Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2013 2014 2015 VW Volkswagen GOLF 7 car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Release the AC control panel.

Release the AC control panel

Release the AC control panel

3. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

Remove the trim panel with a plastic removal tool

3-1

3-1

4. Insert four release keys in the removal slots of the radio and pull outwards to release the radio.

Insert four release keys in the removal slots of the radio and pull outwards to release the radio

Insert four release keys in the removal slots of the radio and pull outwards to release the radio

4-1

4-1

5. Disconnect connectors and cables at the back of the radio.

Disconnect connectors and cables at the back of the radio

Disconnect connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original stereo’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Wish you can learn something useful from the above installation. If you have any doubts, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. To help you select an ideal car radio, here I would like to share a remarkable 2013 2014 2015 VW Volkswagen GOLF 7 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/in-dash-radio-hd-touchscreen-android-for-2013-2014-2015-vw-volkswagen-golf-7-gps-navigation-system-support-usb-aux-steering-wheel-control-dvr-obdii-4g-tpms-wifi-backup-camera-dab-s329590

Thanks to this unit’s built-in Bluetooth module, you are able to connect your Bluetooth-enabled mobile phone to this car radio so as to get access to Bluetooth hands-free calls and Bluetooth streaming music. Additionally, with the assistance of the turn-by-turn directions and voice prompts provided by the high-accuracy 3D GPS navigation system, you are able to know your current locations and navigate to your desired destinations. And while navigating, you can freely listen to your favorite music thanks to this unit’s dual zone function.

Just have fun in car accompanied by this multifunctional car radio!

Posted in Uncategorized. Tagged with .

A Quick Way on a 2014 2015 HYUNDAI I10 Left Hand Driving Car Radio Update with Stereo Speaker Sound System Head Unit

With a new aftermarket car radio installed in your car, you can get access to more upgraded and modern features so as to enrich your in-car life. The image shown below is a 2014 2015 HYUNDAI I10 Left Hand Driving car radio from Seicane after installation. If your factory radio in a 2014 2015 HYUNDAI I10 Left Hand Driving cannot support some modern features, you can replace it with a compatible one. The following is a 2014 2015 HYUNDAI I10 Left Hand Driving car radio installation instruction for your reference.

2014 2015 HYUNDAI I10 Left Hand Driving Car Radio after installation

2014 2015 HYUNDAI I10 Left Hand Driving Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4. Please prepare a lever and a screwdriver before the removal and the installation.

For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details:http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2014 2015 HYUNDAI I10 Left Hand Driving car radio installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

That’s all about how to remove and install a 2014 2015 HYUNDAI I10 Left Hand Driving car radio. If there are any problems you don’t know how to deal with, you can consult your dealer for advice or seek help from someone experienced as well as a professional. Besides, it is vital for you to select an ideal car radio for your beloved car. If you don’t have any ideas, you can refer to a remarkable 2014 2015 HYUNDAI I10 Left Hand Driving car radio from Seicane. Here comes the link, please click:

https://www.seicane.com/android-2014-2015-hyundai-i10-radio-bluetooth-dvd-player-gps-navigation-system-hd-touch-screen-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-canbus-usb-sd-mirror-link-s168071

This all-in-one car radio, integrated with practical and entertainment features, can be regarded as one of the replacements for your factory radio.

Under the guidance of the turn-by-turn directions and voice prompts provided by the GPS navigation system of high accuracy, you are able to know your current locations and navigate to your desired destinations. And you can also freely enjoy your favorite music while navigating.

Through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can dial, answer, reject and mute hands-free calls as well as listen to your favorite Bluetooth streaming music.

Just take this car radio home and enjoy your driving with it installed in your car from now on!

Posted in Uncategorized. Tagged with .

The Easy-to-Understand Measures to Replace a 2014 2015 2016 Subaru Forester Car Radio with DVD Player Bluetooth GPS Function

When your factory radio cannot normally work or it cannot support some modern features, it is high time for you to remove it and install a new aftermarket car radio. This article is mainly about how to install a 2014 2015 2016 Subaru Forester car radio. If you have the same or similar dashboard, you can refer to the following 2014 2015 2016 Subaru Forester car radio installation instruction.

2014 2015 2016 Subaru Forester Car Radio after installation

2014 2015 2016 Subaru Forester Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2014 2015 2016 Subaru Forester car radio installation instruction

1. Use a plastic removal tool to pry the panel.

Use a plastic removal tool to pry the panel

Use a plastic removal tool to pry the panel

1-1

1-1

1-2

1-2

2. Remove the panel.

Remove the panel

Remove the panel

3. Remove four screws that are holding the radio on the dashboard.

Remove four screws that are holding the radio on the dashboard

Remove four screws that are holding the radio on the dashboard

4. Gently take out the original radio.

Gently take out the original radio

Gently take out the original radio

5. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit

Check all the accessories for the new Seicane head unit

6. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit

Connect the harnesses to the back of the new Seicane head unit

7. Connect the Seicane head unit to your original head unit’s plugs.

8. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane head unit into the dash.

10. Put everything into their original place. All the installation is done.

 

If you meet any problems you don’t know how to deal with independently, you can give some details to your dealer for seeking help, or turn to a professional for help. If you still think it hard for you to finish the whole installation process independently, you can directly arrange a professional to install it.

Here I’d like to recommend a remarkable 2014 2015 2016 Subaru Forester car radio from Seicane to you. If you are still searching for an ideal car radio, you might as well take it as a reference.

https://www.seicane.com/hd-android-radio-capacitive-touch-screen-for-2014-2015-2016-subaru-forester-support-3g-wifi-bluetooth-gps-navigation-system-tpms-dab-dvr-obd-ii-aux-headrest-monitor-control-video-rear-camera-usb-sd

This Seicane 2014 2015 2016 Subaru Forester car radio runs with the most advanced and stable Android 7.1 operation system and a quad-core CPU processor, which greatly enhance its capabilities and improve its performance. There are various practical and entertainment features being supported by this unit, such as 3D GPS navigation function, Bluetooth hands-free calls, Bluetooth streaming music, DVD Player, FM/AM radio tuner, etc. Thanks to these comprehensive features, you are able to create a more comfortable and convenient in-car environment as well as improve your driving experience.

If you like this unit, just quickly add it to your shopping cart. Good luck to you.

Posted in Uncategorized. Tagged with .

The Perfect Tutorial on Replacing a 2016 2017 JEEP COMMANDER IPS Screen Bluetooth GPS Car Radio

A factory radio may not be compatible with some comprehensive features which can enrich your in-car life. To gain a brand new driving experience, we sincerely suggest that you should remove your factory radio and install a new aftermarket car radio. Today I would like to share a 2016 2017 JEEP COMMANDER car radio installation guide from Seicane with you. If you also own the same or similar dashboard, you can refer to this guide carefully.

2016 2017 JEEP COMMANDER IPS Screen Bluetooth GPS Car Radio after installation

2016 2017 JEEP COMMANDER IPS Screen Bluetooth GPS Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2016 2017 JEEP COMMANDER car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

That’s all about how to remove the factory radio and install a new car radio for 2016 2017 JEEP COMMANDER. If you have any doubts, you are welcome to consult your dealer, communicate with someone experienced or turn to a professional technician for help.

Besides, to help you select an ideal car radio, here I would like to recommend an amazing 2016 2017 JEEP COMMANDER car radio from Seicane to you. For more details, please click:

https://www.seicane.com/android-anti-glare-hd-touchscreen-car-stereo-for-2016-2017-jeep-commander-bluetooth-music-radio-gps-navigation-audio-system-support-original-amplifier-mirror-link-4g-wifi-backup-camera-dvr-steering-wheel-control-s18jp26

Loaded with the most advanced and stable Android 7.1.2 operation system and a high-quality quad-core CPU processor, this great car radio can be regarded as one of your best options to replace your factory radio.

Bluetooth hands-free calls and Bluetooth streaming music are both available for you as long as you connect your Bluetooth-enabled mobile phone to this unit, which will bring you both great convenience and enjoyment for your driving.

Additionally, you don’t have to worry about getting lost since this unit has built-in high-end 3D GPS navigation system, which enables you to know your current locations and navigate to your desired destinations through turn-by-turn directions and voice prompts.

What’s more, this unit comes a super large 10.1 inch HD anti-glare IPS touch screen to make it possible for you to enjoy the amazing display effect when you are watching your favorite TV programs, video or movies,etc as well as have a perfect view of the road ahead even under the sun.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

How to Replace a 2000 2001 2002 2003 2004-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 Car Radio with GPS Navigation Bluetooth Function

As a car owner, if you want to upgrade your factory radio with a new aftermarket car radio on your own, you can find a related car radio installation guide to help you with the installation. Today we write this article to mainly introduce a 2000 2001 2002 2003 2004-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 car radio installation instruction. If you happen to have the same or similar dashboard, you may refer to this instruction.

2000 2001 2002 2003 2004-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 Car Radio after installation

2000 2001 2002 2003 2004-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. Please prepare a lever and a screwdriver before the removal and the installation.

5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2000 2001 2002 2003 2004-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Use a special plastic tool to remove the trim bazel.

Use a special plastic tool to remove the trim bazel

Use a special plastic tool to remove the trim bazel

2-1

2-1

3. Use a plastic remove tool to push up the heat vent.

Use a plastic remove tool to push up the heat vent

Use a plastic remove tool to push up the heat vent

3-1

3-1

4. Remove 2 hidden screws with a screwdriver below the vent.

Remove 2 hidden screws with a screwdriver below the vent

Remove 2 hidden screws with a screwdriver below the vent

4-1

4-1

5. Push down the vent and loose it.

Push down the vent and loose it

Push down the vent and loose it

6. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

Remove the trim panel with a plastic removal tool

7. Remove 2 screws that are holding the car radio.

Remove 2 screws that are holding the car radio

Remove 2 screws that are holding the car radio

7-1

7-1

8. Take out the original car radio.

Take out the original car radio

Take out the original car radio

10. Check all the accessories for the new Seicane car radio.

11. Connect the harnesses to the back of the new Seicane car radio.

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

That’s all about how to remove and install a 2000 2001 2002 2003 2004-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 car radio. If you have any doubts, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. To help you select a suitable car radio for your car, you may check out the following link below which is an amazing 2000 2001 2002 2003 2004-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 car radio from Seicane.

https://www.seicane.com/android-2000-2001-2005-mercedes-benz-c-class-w203-c180-c200-c220-c230-c240-bluetooth-gps-navigation-car-radio-support-3g-wifi-dvr-rearview-camera-digital-tv-steering-wheel-control-s086007

This multifunctional car radio, especially designed for a 2000 2001 2002 2003 2004-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240, is loaded with the advanced and stable Android 6.0 operation system and a high-quality quad-core CPU processor. Therefore, you can embrace a much smoother, faster and easier operation experience.

With the help of the 3D Navigation of high precise, you are able to accurately locate and navigate to your desired destinations according to the turn-by-turn directions and voice prompts. And because of its dual zone function, you can play your favorite music behind the scene under GPS mode without interrupting the navigation.

And the additional entertainment features will add a lot of fun to your trip.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

How to Upgrade a 2011 2012 2013 2014 2015-2016 KIA PICANTO MORNING Car Radio Stereo with Bluetooth Sat Nav Music System

If you want to enjoy more upgraded and new features in your car to have fun, it will be a great choice of you to replace your factory radio and a brand new multifunctional car radio which can be compatible with a lot of advanced features. The following is a 2011 2012 2013 2014 2015-2016 KIA PICANTO MORNING car radio installation guide from Seicane. If you happen to have the same or similar dashboard, then you can refer to the following installation instruction as follows to help with your installation.

2011 2012 2013 2014 2015-2016 KIA PICANTO MORNING Car Radio Stereo after installation

2011 2012 2013 2014 2015-2016 KIA PICANTO MORNING Car Radio Stereo after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011 2012 2013 2014 2015-2016 KIA PICANTO MORNING car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Now do you know how to install a 2011 2012 2013 2014 2015-2016 KIA PICANTO MORNING   car radio now? If not, you can not only contact your dealer for a wiring diagram but also turn to a professional for help. Anyway, first of all, please make sure that you’ve already got an ideal car radio. If not, here I would like to share a marvelous 2011 2012 2013 2014 2015-2016 KIA PICANTO MORNING car radio from Seicane with you. For more details, please click:

https://www.seicane.com/aftermarket-hd-touch-screen-2011-2016-kia-picanto-morning-android-radio-replacement-with-gps-dvd-player-3g-wifi-bluetooth-music-mirror-link-obd2-backup-camera-dvr-aux-usb-sd-1080p-video-s18k011

With this car radio installed in your car, you can enjoy a much faster and stable operation experience since this car radio is running on the most advanced and stable Android 7.1.2 operation system and a high-quality quad-core CPU processor.

With the help of the high-end 3D GPS navigation system, you can easily know your current locations and navigate to your desired destinations through turn-by-turn directions and voice prompts. And while navigating, this unit’s dual zone function enables you to listen to your favorite music, and the music will automatically switch to GPS voice.

Besides, you can make full use of this unit’s DVD player function to play videos, TV programs, movies to add a lot of convenience and enjoyment to your trip.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

How to Replace a 2009 2010 2011 2012 2013 Toyota Prius(RHD) Car Radio with GPS Bluetooth DVD Player Properly

If your factory radio is too outdated to be compatible with many modern features, you can consider replacing your factory radio with a new aftermarket car radio which comes with a wide range of practical and entertainment features to enrich your in-car life.

This article is mainly about a step-by-step installation guide for a 2009 2010 2011 2012 2013 Toyota Prius(RHD) car radio. If you have the same or similar dashboard, you can read this article carefully.

2009 2010 2011 2012 2013 Toyota Prius(RHD) Car Radio after installation

2009 2010 2011 2012 2013 Toyota Prius(RHD) Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2009 2010 2011 2012 2013 Toyota Prius(RHD) car radio installation guide

1. Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool.

Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool

Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool

2. Remove the dash panel below the radio. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash.

Remove the dash panel below the radio. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash

Remove the dash panel below the radio. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash

3. Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force.

Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force

Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force

4. Disconnect the wiring.

Disconnect the wiring

Disconnect the wiring

5. Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver.

Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver

Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver

6. Pull the radio toward you slowly.

Pull the radio toward you slowly

Pull the radio toward you slowly

7. Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves.

Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves

Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original car radio’s plugs.

11. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane radio into the dash.

13. Put everything into their original place.

 

Wish the above installation guide can do you some help for your car radio installation. If you have any doubts, you can seek help from your dealer, someone experienced or a professional. Or you can directly go to a car radio upgrade center. Anyway, it is essential for you to select an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is an amazing 2009 2010 2011 2012 2013 Toyota Prius(RHD) car radio from Seicane.

https://www.seicane.com/android-2009-2013-toyota-prius-rhd-gps-navigation-radio-dvd-player-with-usb-bluetooth-music-audio-system-wifi-mirror-link-1080p-video-s18t055r

This car radio is upgraded to the most advanced Android 7.1.2 operation system and a high-quality quad-core CPU processor, so you can enjoy the much smoother, easier and faster operation experience.

Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this car radio so as to get access to Bluetooth hands-free calls and Bluetooth streaming music. Therefore you can gain numerous convenience and enjoyment. Besides, with the help of the high-end 3D GPS navigation system, you are able to reach anywhere you would like to go to through turn-by-turn directions and voice prompts.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

How to Successfully Remove and Install a 2006 2007 2008 2009 2010-2013 Mitsubishi PAJERO V97/V93 Car Radio DVD GPS Navigation System

Do you have a plan to upgrade your factory radio with a new aftermarket car radio? If your answer is “yes”, then you need a related car radio installation guide. If you are an owner of a 2006 2007 2008 2009 2010-2013 Mitsubishi PAJERO V97/V93 and plan to replace your factory radio, you can refer to the following 2006 2007 2008 2009 2010-2013 Mitsubishi PAJERO V97/V93 car radio installation guide. Wish it can be helpful for you.

2006 2007 2008 2009 2010-2013 Mitsubishi PAJERO V97V93 Car Radio after installation

2006 2007 2008 2009 2010-2013 Mitsubishi PAJERO V97V93 Car Radio after installation

4 tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2006 2007 2008 2009 2010-2013 Mitsubishi PAJERO V97/V93 car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

If you have any doubts, you can consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio.

To help you pick an ideal car radio, here I would like to share a remarkable 2006 2007 2008 2009 2010-2013 Mitsubishi PAJERO V97/V93 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/hd-touch-screen-2006-2007-2008-2013-mitsubishi-pajero-v97-v93-android-radio-gps-navigation-car-stereo-with-bluetooth-music-mp3-u0-s18m212

Even if you have no good sense of directions, you can make full use of this car radio’s GPS function to locate where you are and navigate to your desired destinations according to turn-by-turn directions and voice prompts. And thanks to this unit’s dual zone function, you can freely listen to your favorite music while navigating.

Besides, by simply pairing the car radio with your Bluetooth-enabled mobile phone, you are able to dial, answer, reject or mute hands-free calls and enjoy Bluetooth music from your phone music playlists, which can largely promise you a very safe and relaxing driving experience.

Wish you like this unit! Good luck!

Posted in Uncategorized. Tagged with .