With the development of technology, more and more car owners tend to pursue a more wonderful in-car life. Under this circumstance, you can think about replacing your factory radio with a new aftermarket car radio to upgrade your in-car life. While for the installation of the new car radio, you can refer to a related installation guide. The following is a 2012 2013 2014 2015 MAZDA CX-4 car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide carefully.
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2012 2013 2014 2015 MAZDA CX-4 car radio installation guide
1. The original car radio.
2. Start from the right trim panel part near the air vent. Use a plastic removal tool to release this trim part.
3. Use a plastic removal tool to pry the air vent, remove it and set it aside.
4. Use a screwdriver to remove one bolt thatisholding the original car radio.
5. Release three clips to take the original car radio out from the dashboard.
6. Disconnect connectors and cables at the back the radio.
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your originalradio’s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
Wish you can learn some skills from the above installation guide. If you have any doubts, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. Besides, it is very essential for you to select an ideal car radio for your car. If you have no ideas, I’d like to recommend a remarkable 2012 2013 2014 2015 MAZDA CX-4 car radio from Seicane to you. For more details, please click:
This remarkable car radio is specially upgraded to the stable Android 6.0 operation system and a high-quality quad-core CPU processor to enhance its capabilities and performance.
With its built-in 3D GPS navigation system of high accuracy, you can make full use of it to locate where you are and navigate to your desired destinations through turn-by-turn direction and voice prompts. Besides, thanks to this unit’s dual zone function, you can freely listen to your favorite music while navigating, and the music will automatically switch to GPS voice.
By pairing your Bluetooth-enabled mobile phone with this unit, both Bluetooth hands-free calls and streaming music are both available for you to enjoy great convenience and enjoyment with keeping your hands on the steering wheel your eyes on the road ahead.
If you like this unit, just don’t forget to add it to your shopping cart. Good luck!