http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Monthly Archives: February 2017

How to install a 2002-2007 2008 Chrysler Aspen Concorde Pacifica car radio with stereo GPS bluetooth connectivity

With a new all-in-one car radio, you can easily get access to more upgraded and modern features. Thus, you can further create an in-car environment filled in more convenience, comfort and enjoyment, which makes your car more featured. Here we write this post to introduce how to install a 2002-2007 2008 Chrysler Aspen Concorde Pacifica car radio which can enrich your in-car environment and driving experience. You might read this post and take it as your reference if you plan to install a new radio on your own.

2002-2007 2008 Chrysler Aspen Concorde Pacifica car radio after installation

2002-2007 2008 Chrysler Aspen Concorde Pacifica car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2002-2007 2008 Chrysler Aspen Concorde Pacifica car radio installation steps

1. Loosen the trim panel with a lever.

Loosen the trim panel with a lever

Loosen the trim panel with a lever

2. Take the panel off the dash and disconnect the wires from the car.

Take the panel off the dash and disconnect the wires from the car

Take the panel off the dash and disconnect the wires from the car

2-1

2-1

3. Remove the four screws which are holding the unit with a screwdriver.

Remove the four screws which are holding the unit with a screwdriver

Remove the four screws which are holding the unit with a screwdriver

4. Take out the unit and disconnect the wire harness at the back of the unit.

Take out the unit and disconnect the wire harness at the back of the unit

Take out the unit and disconnect the wire harness at the back of the unit

4-1

4-1

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the Seicane car radio to your original car radio’s plugs.

Connect the Seicane car radio to your original car radio's plugs

Connect the Seicane car radio to your original car radio’s plugs

6-1

6-1

7. Put the new Seicane car radio into the dash.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put trim panel back on your new Seicane car radio after the normal test.

 

That’s all about how to remove the factory radio and install a new aftermarket radio for a 2002-2007 2008 Chrysler Aspen Concorde Pacifica. To overcome the difficulties you meet before or during the installation, you can contact your dealer and seek advice from someone experienced or a professional.

As an ideal car radio is the key to the success of installation, you must have to choose a suitable radio for your beloved car. Here I would like to share a 2002-2007 2008 Chrysler Aspen Concorde Pacifica gps bluetooth car radio from Seicane with you. Wish you like it.

http://www.seicane.com/2-din-2002-2007-2008-chrysler-aspen-concorde-pacifica-dvd-gps-sat-nav-am-fm-radio-tv-tuner-bluetooth-ipod-iphone-aux-steering-wheel-control-usb-sd-dual-zone-t6015

This great car radio provides you with a stable running environment since it is loaded with WinCE 6.0 operation system. Besides, it can make your trip full of convenience, comfort, and enjoyment because of a variety of practical and entertainment features, including high-precision GPS function, radio tuner, DVD player, Bluetooth hands-free calls, Bluetooth streaming music, iPod & iPhone connection, USB/SD connection, etc.

Mention to the high-precision GPS function, you are able to have the best route option and you will be guided to your destinations through voice cues, distance information, POIs and road planning provided for you.

Besides, in the motion, you are able to play CDs, VCDs, Bluetooth music, and FM/AM radio to bring a lot of fun for yourself and your passengers.

Wish you enjoy your trip accompanied by this car radio.

Posted in Uncategorized.

Ultimate Instruction on a 2005 2006 Chevrolet Corvette gps bluetooth Stereo Audio System Head Unit Upgrade

Can you believe that a new aftermarket not only enhances your car’s capabilities but also takes your driving experience up a level? There is no exaggeration because an ideal car stereo do plays an important role in your car. If you are not so satisfied with your factory radio, then you can try to upgrade it with a new aftermarket stereo. And an ultimate instruction is necessary for your installation. The following is the step-by-step installation instruction from Seicane for a 2005 2006 Chevrolet Corvette gps bluetooth Stereo. If you also own such a vehicle type, you might refer to this instruction.

2005 2006 Chevrolet Corvette gps bluetooth Stereo after installation

2005 2006 Chevrolet Corvette gps bluetooth Stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005 2006 Chevrolet Corvette car stereo installation instruction

1. Move the shift lever down to the lowest position. So you can have enough room to get access to the radio.

Move the shift lever down to the lowest position. So you can have enough room to get access to the radio

Move the shift lever down to the lowest position. So you can have enough room to get access to the radio

1-1

1-1

2. Use a pry tool to pop off the radio panel.

Use a pry tool to pop off the radio panel

Use a pry tool to pop off the radio panel

3. Remove connectors at the back of the radio panel and set the panel aside.

Remove connectors at the back of the radio panel and set the panel aside

Remove connectors at the back of the radio panel and set the panel aside

4. There are four screws holding the radio. Use a screwdriver to remove these four screws.

There are four screws holding the radio. Use a screwdriver to remove these four screws

There are four screws holding the radio. Use a screwdriver to remove these four screws

5. Pull out the original radio.

Pull out the original radio

Pull out the original radio

6. Disconnect the connectors and cables at the back of the radio.

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

9. Connect the Seicane car stereo to your original car radio’s plugs.

10. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. If the new Seicane car stereo works well, put it into the dash.

12. Put everything into their original place, and all the installation is done.

 

That’s all about the detailed steps to install a new stereo for your 2005 2006 Chevrolet Corvette. If you encounter any difficulties in understanding these steps, please feel free to consult a professional technician. Any way, first of all, you have to purchase an ideal stereo for ensuring a successful car stereo installation process. If you have no ideas, I’d like to share a remarkable 2005 2006 Chevrolet Corvette gps bluetooth Stereo from Seicane with you. For more details, please click:

http://www.seicane.com/2005-2006-chevrolet-corvette-android-radio-gps-navigation-with-dvd-player-hd-touch-screen-bluetooth-wifi-tv-backup-camera-1080p-steering-wheel-control-s018724

This modern car stereo is specific for Chevrolet Corvette which is manufactured in 2005 and 2006. This stereo is equipped with the stable Android 5.1.1 operation system and a high quality Quad-core CPU, so it can offer users the best services because of its higher capabilities and configurations.

Even you are not good at identifying directions, you won’t get lost any longer since this stereo provides you with the accurate GPS satellite location, turn-by-turn navigation, voice prompts and cursor hints.

And by simply pairing with your Bluetooth-enabled mobile phone, this stereo enables you to dial, receive, reject and mute hands-free phone calls as well as listen to the music streaming from your Bluetooth-enabled devices to keep your journey safe, convenient and joyful. Thanks for reading and have a nice day!

Posted in Uncategorized. Tagged with .

Replace your old original radio with a new 2006-2013 Alfa Romeo Brera car radio with Wince system dvd player GPS Ipod

You can never image that how your in-car life will change without an ideal car radio installed in your car. Without an ideal radio, you will easily get bored or tired after a long-time driving, which might bring you a risky driving. On the contrary, a car radio with a DVD player which is compatible with a lot of multimedia play formats will cheer you up and refresh you so that you can focus on the road ahead. Here I’d like to introduce how to replace a 2006-2013 Alfa Romeo Brera car radio. If you have interest, please refer to it patiently.

2006-2013 Alfa Romeo Brera car radio after installation

2006-2013 Alfa Romeo Brera car radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2013 Alfa Romeo Brera car radio replacement steps

1. Firstly please make extractors or directly buy some for help with your removal.

Firstly please make extractors or directly buy some for help with your removal

Firstly please make extractors or directly buy some for help with your removal

2. There are four slots in the original car radio. Insert these extractors into the holes of the radio.

There are four slots in the original car radio. Insert these extractors into the holes of the radio

There are four slots in the original car radio. Insert these extractors into the holes of the radio

2-1

2-1

3. Push the extractors away and pull the original radio firmly.

Push the extractors away and pull the original radio firmly

Push the extractors away and pull the original radio firmly

3-1

3-1

4. Remove aerial and connectors from the back of the radio.

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original car radio’s plugs.

8. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. If everything is OK, make everything return to the original place.

 

Wish you can gain some skills from the above steps. To deal with any problems you meet, please feel at ease to consult a technician for professional suggestions. Besides, since it is significant for you to choose a suitable car radio, here I would like to share an amazing 2006-2013 Alfa Romeo Brera car radio from Seicane with you for your reference.

http://www.seicane.com/alfa-romeo-brera-dvd-player-with-gps-navigation-radio-bluetooth-ipod-srd-8804-2

This 2006-2013 Alfa Romeo Brera car radio is equipped with the newest 800MHz ARM11 processor and the stable WinCE6.0 operation system. Since it is an all-in-one unit, it can support a wide range of features, including GPS function, radio function, Bluetooth connectivity, disc play, mini USB and SD card, Aux in, IPod, etc. And after installation, your original car’s steering control can still work.

Here we take the GPS navigation system as an instance. With the advanced GPS module, you can applied both online and offline navigation app from Google Play app market. You won’t get lost even in an unfamiliar place by fully utilizing the GPS function which can accurately locate your current position and calculate the best route for you to reach your destinations. What are you waiting for? Just add it to your shopping cart right now. Good luck to you!

Posted in Uncategorized. Tagged with .

How to Remove a 2002 2003 2004 CHRYSLER Dakota Radio to Install a Touch Screen Radio Stereo Navigation System

Is your factory radio featured with the GPS navigation function? If not, it is high time for you to consider replacing your factory radio with a multifunctional car radio which can support a wide range of features. In that way, you can easily locate and navigate to your ideal destinations under the correct guidance of the GPS function. And by making full use of these features, your different needs in car can be satisfied. The installation of a new aftermarket car radio is not complicated. Here comes a detailed 2002 2003 2004 CHRYSLER Dakota car radio installation guide from Seicane for your reference.

2002 2003 2004 CHRYSLER Dakota Radio after installation

2002 2003 2004 CHRYSLER Dakota Radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2002 2003 2004 CHRYSLER Dakota radio installation guide

1. Remove the trim piece above cup holder with a lever.

Remove the trim piece above cup holder with a lever

Remove the trim piece above cup holder with a lever

2. Remove 2 screws behind the trim piece.

Remove 2 screws behind the trim piece

Remove 2 screws behind the trim piece

3. Gently pry around the side of trim panel with the lever and then remove the trim panel.

Gently pry around the side of trim panel with the lever and then remove the trim panel

Gently pry around the side of trim panel with the lever and then remove the trim panel

4. Remove 4 screws which hold the factory radio in place.

Remove 4 screws which hold the factory radio in place

Remove 4 screws which hold the factory radio in place

5. Take out the factory radio.

Take out the factory radio

Take out the factory radio

6. Disconnect the smaller harness on the behind of the factory radio.

Disconnect the smaller harness on the behind of the factory radio

Disconnect the smaller harness on the behind of the factory radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio’s plugs.

10. Install four screws and trim panel.

11. Install 2 screws behind the trim piece and the trim piece.

12. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

 

The whole process of this unit is not complicated, isn’t it? However, you need to make clear every step before the removal and installation. If you have any questions, you can consult your dealer or ask for a technician to help you with the installation.

To make sure that the new radio can be perfectly installed in your car and work well with your car, you need to buy a suitable 2002 2003 2004 CHRYSLER Dakota radio. Here I’d like to recommend a 2002 2003 2004 CHRYSLER Dakota radio from Seicane to you.

http://www.seicane.com/quad-core-2002-2003-2004-chrysler-dakota-android-radio-bluetooth-touchscreen-gps-navigation-system-dvd-player-mirror-link-wifi-rearview-camera-s125002

Different from your factory radio with single function, this unit can be compatible with a wide range of features, including 3D navigation, radio tuner, Bluetooth connectivity, DVD player, USB/ SD connection, etc.

Through the connection between your mobile phone and this unit, you can dial, receive, reject and mute hand-free calls as well as stream Bluetooth music from your playlists in phone without taking your hands off the steering wheel control so as to keep your driving safe, convenient and relaxing.

Besides, the built-in GPS navigation can help you to a large degree. With the turn-by-turn directions and voice prompts, even you are poor at identifying directions in daily life, you can easily be offered the best route and be accurately guided to any places you’d like to be in.

This 2002 2003 2004 CHRYSLER Dakota radio is at a reasonable price right now. It’s wise of you to install it in your car and have a brand new driving experience from now on!

Posted in Uncategorized. Tagged with .

How to Upgrade a 2006-2013 Mercedes Benz R Class W251 R280 R300 R320 R350 R63 Stereo Sound System Head Unit

As more car stereos are with plug-and-play features now, you don’t have to modify or cut any wires in car and it only cost you several steps to finish the whole upgrade process. Therefore, you can also be a “professional” who can remove a factory radio and install a new car stereo? If you plan to upgrade a 2006-2013 Mercedes Benz R Class W251 R280 R300 R320 R350 R63 stereo, please don’t hesitate to read the following clear installation guide for a 2006-2013 Mercedes Benz R Class W251 R280 R300 R320 R350 R63 car stereo.

2006-2013 Mercedes Benz R Class W251 R280 R300 R320 R350 R63 stereo after installation

2006-2013 Mercedes Benz R Class W251 R280 R300 R320 R350 R63 stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2006-2013 Mercedes Benz R Class W251 R280 R300 R320 R350 R63 car stereo installation guide

1. The original car radio.

The original car radio

The original car radio

2. Pry out the air conditioner panel along gap with a lever.

Pry out the air conditioner panel along gap with a lever

Pry out the air conditioner panel along gap with a lever

3. Remove the air conditioner panel.

Remove the air conditioner panel

Remove the air conditioner panel

4. Remove two screws holding the stereo in the dashboard frame with a screwdriver.

Remove two screws holding the stereo in the dashboard frame with a screwdriver

Remove two screws holding the stereo in the dashboard frame with a screwdriver

4-1

4-1

5. Pull the buckles down.

Pull the buckles down

Pull the buckles down

5-1

5-1

6. Carefully take the original car radio out of the dashboard.

7. Disconnect the ISO plug of the car in the socket of the original car radio.

Disconnect the ISO plug of the car in the socket of the original car radio

Disconnect the ISO plug of the car in the socket of the original car radio

8. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

9. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

10. Connect the Seicane car stereo to your original car radio’s plugs.

11. Put the new Seicane stereo back into the dash.

12. Put the buckles back into its original place.

13. Install two screws and the air conditioner panel.

14. Turn on the new Seicane stereo and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

 

Wish the above installation guide can do some help to your installation. If you are trapped into any trouble, please feel free to communicate with a professional mechanic and your dealer or you can ask an experienced person to help you alongside. If you don’t know which kind of stereo can fit your car very well, I’d like to recommend a 2006-2013 Mercedes Benz R Class W251 R280 R300 R320 R350 R63 stereo to you for your reference.

http://www.seicane.com/seicane-s127510-android-radio-gps-audio-system-for-2006-2013-mercedes-benz-r-class-w251-r280-r300-r320-r350-r63-with-cd-dvd-player-3g-wifi-bluetooth-music-mirror-link-obd2

Specially designed for a 2006-2013 Mercedes Benz R Class W251 R280 R300 R320 R350 R63, this stereo’s capacity is enhanced by the stable Android 5.1.1 operation system a powerful RK3188 1.6 GHz Quad-core processor. Under the Bluetooth technology, you are able to link your Bluetooth-enabled mobile phone with this unit so as to gain access to hands-free calls and streaming music, which can guarantee your driving safety, convenience and entertainment. Additionally, this stereo is equipped with the high-precise worldwide real-time navigation function, which makes you possible to easily locate and navigate to your desired destinations accurately and punctually according to the turn-by-turn directions and voice prompts. Wish you enjoy your driving accompanied by this stereo with multiple functions from now on!

Posted in Uncategorized.

How to Upgrade a 2007 2008 2009 Mercury Mountaineer DVD Player with Aux Input Radio Stereo

For those who want to upgrade a factory radio for a 2007 2008 2009 Mercury Mountaineer with a new aftermarket stereo, before pick a stereo, you should check the compatibility between your stereo and your car. There are many 2007 2008 2009 Mercury Mountaineer stereo available in the market, only few of them support a wide range of practical and entertainment features. Today I would like to share with you a 2007 2008 2009 Mercury Mountaineer car stereo from Seicane which can meet almost all your needs in car. First of all, here come its installation steps.

2007 2008 2009 Mercury Mountaineer car stereo after installation

2007 2008 2009 Mercury Mountaineer car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2007 2008 2009 Mercury Mountaineer stereo installation steps

Step 1: Remove the trim around gear shifter.

Remove the trim around gear shifter

Remove the trim around gear shifter

Step 2: Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver

Remove screws securing center console lid with a screwdriver

Step 3: Remove the center console trim.

Remove the center console trim

Remove the center console trim

Step 4: Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides

Remove console side panels on both driver and passenger sides

Step 5: Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls

Remove bolts securing radio bezel and AC controls

Step 6: Unplug AC controls (from passenger side).

Unplug AC controls (from passenger side)

Unplug AC controls (from passenger side)

Step 7: Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls

Remove the radio bezel and AC controls

Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Step 9: Check all the accessories for the new Seicane stereo.

Check all the accessories for the new Seicane stereo

Check all the accessories for the new Seicane stereo

Step 10: Connect the harnesses to the back of the new Seicane stereo.

Connect the harnesses to the back of the new Seicane stereo

Connect the harnesses to the back of the new Seicane stereo

Step 11: Connect the Seicane stereo to your original car radio’s plugs, and put the new Seicane stereo into the dash.

Step 12: Turn on the new Seicane stereo and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

 

Above all are the installation steps for a 2007 2008 2009 Mercury Mountaineer DVD Player. If you have any doubts, you can contact with your dealer or seek help from a professional. If you haven’t got a suitable car stereo for your car, you can check the following link which is a 2007 2008 2009 Mercury Mountaineer DVD Player from Seicane.

 

http://www.seicane.com/seicane-pure-android-quad-core-dvd-gps-in-dash-radio-system-for-2007-2008-2009-mercury-mountaineer-with-16g-flash-3g-wifi-bluetooth-mirror-link-obd2-rearview-camera-s127302

This Android 2007 2008 2009 Mercury Mountaineer stereo comes with high configuration including the stable 5.1.1 operation system, Quad-core 1.6 GHz CPU, 16GB Flash, 7 inch high definition capacitive screen with 1024*600 resolution. Based on these improved configurations and performance, this stereo runs faster than the factory one.

This unit upgrades your car with BC6 Bluetooth module for hands-free calls and music streaming.

As long as you wireless connect your Bluetooth-enabled mobile phone with this unit, you can dial, answer, reject and mute calls without taking your hands off the steering wheel. And the capability to stream your favorite tunes from your Smartphone wirelessly is also desirable. Apart from Bluetooth connectivity, there are many other features being supported by this unit, including 3D GPS navigation, DVD player, USB/ SD connection, file management, steering wheel control, etc. With these different features, this stereo can meet your different needs. Wish you like it and good luck to you!

Posted in Uncategorized. Tagged with .

How to Upgrade a 2006-2009 Ford Fusion Stereo with Aftermarket Radio Sound System Most Quickly

With the improvement of people’s living standard, cars become more and more available for most people, and many car owners want to improve their in-car life as well. To improve the in-car life, as a car owner, you can replace your factory radio with a new aftermarket radio. To finish the whole radio installation process successfully, you can find a detailed instruction to help you. With correct instruction, the installation is quite easy. The following is a 2006 2007 2008 2009 Ford Fusion car radio installation instruction. If you have the same dashboard, you can refer to it before your installation.

2006-2009 Ford Fusion stereo after installation

2006-2009 Ford Fusion stereo after installation

Here are 4 tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2006-2009 Ford Fusion radio installation instruction

Step 1: Remove the trim around gear shifter.

Remove the trim around gear shifter

Remove the trim around gear shifter

Step 2: Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver

Remove screws securing center console lid with a screwdriver

Step 3: Remove the center console trim.

Remove the center console trim

Remove the center console trim

Step 4: Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides

Remove console side panels on both driver and passenger sides

Step 5: Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls

Remove bolts securing radio bezel and AC controls

Step 6: Unplug AC controls (from passenger side).

Unplug AC controls (from passenger side)

Unplug AC controls (from passenger side)

Step 7: Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls

Remove the radio bezel and AC controls

Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Step 9: Check all the accessories for the new Seicane radio.

Check all the accessories for the new Seicane radio

Check all the accessories for the new Seicane radio

Step 10: Connect the harnesses to the back of the new Seicane radio.

Connect the harnesses to the back of the new Seicane radio

Connect the harnesses to the back of the new Seicane radio

Step 11: Connect the Seicane radio to your original car radio’s plugs, and put the new Seicane radio into the dash.

Step 12: Turn on the new Seicane radio and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

 

Before the installation, it is strongly suggested that you make clear how the cables are connected. If you have any doubts, you can communicate with your dealer for a wiring diagram or seek help from a professional.

Since it is essential to select a suitable car radio for your car, if you haven’t got an ideal car radio for your 2006 2007 2008 2009 Ford Fusion, I’d like to recommend the following car radio to you, which is an ideal radio replacement from Seicane for 2006 2007 2008 2009 Ford Fusion. For more details, please click:

http://www.seicane.com/2006-2009-ford-fusion-quad-core-pure-android-dvd-gps-in-dash-radio-system-with-16g-flash-3g-wifi-bluetooth-mirror-link-obd2-rearview-camera-s127302

This 2006 2007 2008 2009 Ford Fusion car radio is upgraded to the stable Android 5.1.1 operation system and a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor to enhance the capabilities and improve the operation.

The strong 3D built-in GPS navigation system offers the turn-by-turn directions and voice prompts to help you quickly locate and navigate to wherever you would like to go. Under the wireless Bluetooth connectivity, you can freely get access to hands-free phone calling and streaming music though the connection between your Bluetooth-enabled mobile phone and this unit.

Apart from modern features like GPS navigation, Bluetooth connectivity, DVD player, FM/AM radio, USB &SD card connection, etc, many optional features can be all supported, like digital TV, DVR, OBDⅡ, DAB, 3g module and rearview camera. Wish you like it. Good luck to you!

Posted in Uncategorized. Tagged with .

How to Replace a 2002-2007 Dodge Durango Dakota P/U Stereo with Sound system Head Unit

With the detailed installation steps as below, you can easily remove and install a 2002-2007 Dodge Durango Dakota P/U car stereo even you don’t have installed a car stereo before. The following image is a 2002-2007 Dodge Durango Dakota P/U stereo after installation. It looks very amazing, isn’t it? So if you plan to install such a stereo, before the installation, please read the following installation steps and make them clear.

2002-2007 Dodge Durango Dakota P U car stereo after installation

2002-2007 Dodge Durango Dakota P U car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2002-2007 Dodge Durango Dakota P/U car stereo installation steps

1. Loosen the trim panel with a lever.

Loosen the trim panel with a lever

Loosen the trim panel with a lever

2. Take the panel off the dash and disconnect the wires from the car.

Take the panel off the dash and disconnect the wires from the car

Take the panel off the dash and disconnect the wires from the car

2-1

2-1

3. Remove the four screws which are holding the unit with a screwdriver.

Remove the four screws which are holding the unit with a screwdriver

Remove the four screws which are holding the unit with a screwdriver

4. Take out the unit and disconnect the wire harness at the back of the unit.

Take out the unit and disconnect the wire harness at the back of the unit

Take out the unit and disconnect the wire harness at the back of the unit

4-1

4-1

5. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car sterep

Check all the accessories for the new Seicane car sterep

6. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

7. Connect the Seicane car sterep to your original car radio’s plugs.

Connect the Seicane car sterep to your original car radio's plugs

Connect the Seicane car sterep to your original car radio’s plugs

8. Put the new Seicane car sterep into the dash.

9. Turn on the new Seicane car sterep to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put trim panel back on your new Seicane car sterep after the normal test.

 

Are you clear about every detail step? If you aren’t, please feel free to contact with your dealer or ask for a professional for help. Or you can ask someone experienced to help you alongside. Besides, it is essential for you to check the compatibility between your car stereo and your car. If you have no ideas, you can check out the following link which is a 2002-2007 Dodge Durango Dakota P/U stereo from Seicane.

http://www.seicane.com/seicane-s09206-aftermarket-android-dvd-player-gps-navigation-system-for-2002-2007-dodge-durango-dakota-p-u-with-obd2-bluetooth-radio-mirror-link-touch-screen-dvr-backup-camera-tv-usb-sd-1080p-video-wifi-steering-wheel-control

This unit’s up-to-date Android 4.4.4 operation system is with fast response and stability and a RK PX3 1.66GMHZ quad-core processor is with improved performance.

There are up to 37 kinds of OSD languages being supported by this stereo, so it can be used almost all over the world.

The updated GPS navigation system is specially built in for you to have the shortest route to reach your destinations through turn-by-turn directions and voice prompts. Besides, the real-time traffic congestion maps can offer you suggestions about taking alternative routes so as to save you a lot of time and bring you convenience.

Wish this stereo become your best road companion. Good luck to you!

Posted in Uncategorized. Tagged with .

Concise Tutorial on a 2002-2006 CHRYSLER PT Cruiser Radio Removal and Installation with a Double Din Stereo CD Player

When you find your original car radio cannot meet most of your needs in car, just quit it and make a replacement. Here is a detailed installation instruction from Seicane for a 2002 2003 2004 2005 2006 CHRYSLER PT Cruiser car radio. When you are going to replace your original radio, please do it carefully if you are not a professional at installation of aftermarket car dvd gps head units. And it is suggested that you ask a professional mechanic for help for avoiding gross mistakes.

2002-2006 CHRYSLER PT Cruiser car radio after installation

2002-2006 CHRYSLER PT Cruiser car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2002-2006 CHRYSLER PT Cruiser car radio installation instruction

1. Remove the trim piece above cup holder with a lever.

Remove the trim piece above cup holder with a lever

Remove the trim piece above cup holder with a lever

2. Remove 2 screws behind the trim piece.

Remove 2 screws behind the trim piece

Remove 2 screws behind the trim piece

3. Gently pry around the side of trim panel with the lever and then remove the trim panel.

Gently pry around the side of trim panel with the lever and then remove the trim panel

Gently pry around the side of trim panel with the lever and then remove the trim panel

4. Remove 4 screws which holds the factory radio in place.

Remove 4 screws which holds the factory radio in place

Remove 4 screws which holds the factory radio in place

5. Take out the factory radio.

Take out the factory radio

Take out the factory radio

6. Disconnect the smaller harness on the behind of the factory radio.

Disconnect the smaller harness on the behind of the factory radio

Disconnect the smaller harness on the behind of the factory radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio’s plugs.

10. Install four screws and trim panel.

11. Install 2 screws behind the trim piece and the trim piece.

12. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

 

Wish you gain some skills from the above steps. If there are any doubts, please don’t hesitate to seek help from your dealer, a professional or someone experienced. And first of all, please check the compatibility between your new car radio and your car. If there is no enough compatibility, you can check out the following product link which is an all-in-one 2002-2006 CHRYSLER PT Cruiser gps dvd radio from Seicane. Please click:

http://www.seicane.com/seicane-s09201-android-gps-radio-for-2002-2006-chrysler-pt-cruiser-with-touch-screen-obd2-bluetooth-navigation-system-mirror-link-dvd-player-dvr-backup-camera-tv-video-wifi-usb-sd

This powerful DVD multimedia player is integrated with GPS navigation system, which is compatible with 2002 2003 2004 2005 2006 CHRYSLER PT Cruiser. With it installed in your beloved car, you can not only freely play CD, VCD, DVD, and TV but also have more flexible options from external devices to please both yourself and your passengers through USB/ SD connection.

With the assistance of the GPS navigation system of high accuracy, you can have the best and shortest route option to get to your destinations. Its dual zone function enables you to enjoy your favorite music while you are using the GPS. The background music becomes lower when there comes out navigation voice, which brings you a lot of convenience. Just purchase this all-in-one radio now and install it in your beloved car. Wish you enjoy your in-car life accompanied by it.

Posted in Uncategorized.

How to Replace a 2006-2011 Honda CR-V Radio with Stereo Audio Speakers in a Relatively Inexpensive Way

As a car owner, you may have considered this question that how you can get your ideal stereo installed in your car. If you have no experience of the installation, it is wise of you to have your stereo installed by a professional technician from a car stereo upgrade center. But if you have some experience, you can also finish the installation with the help of the step-by-step installation guide. Today I would like to introduce a detailed 2006-2011 Honda CR-V stereo installation guide from Seicane for your reference.

2006-2011 Honda CR-V stereo after installation

2006-2011 Honda CR-V stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2011 Honda CR-V stereo installation guide

1. The original radio of the car.

The original radio of the car

The original radio of the car

2. Use a screwdriver to push up the heater control on the right side. Do the same on the left side.

Use a screwdriver to push up the heater control on the right side. Do the same on the left side

Use a screwdriver to push up the heater control on the right side. Do the same on the left side

3. Take out the heater control with your hands.

Take out the heater control with your hands

Take out the heater control with your hands

4. Pry the top of the decoration panel with removal tools and remove it with your hands, and put it aside.

Pry the top of the decoration panel with removal tools and remove it with your hands, and put it aside

Pry the top of the decoration panel with removal tools and remove it with your hands, and put it aside

5. Push out the vent panel with your hands at the back and set it on the top of the dashboard.

Push out the vent panel with your hands at the back and set it on the top of the dashboard

Push out the vent panel with your hands at the back and set it on the top of the dashboard

6. Remove four screws(two on the top, the other two at the bottom) holding the radio in the dash.

Remove four screws(two on the top, the other two at the bottom) holding the radio in the dash

Remove four screws(two on the top, the other two at the bottom) holding the radio in the dash

7. Take the original radio out of the dash with your hands.

Take the original radio out of the dash with your hands

Take the original radio out of the dash with your hands

8. Unplug the connectors at the back of the original radio.

Unplug the connectors at the back of the original radio

Unplug the connectors at the back of the original radio

9. Check all the accessories for the new Seicane stereo.

Check all the accessories for the new Seicane stereo

Check all the accessories for the new Seicane stereo

10. Connect the harnesses to the back of the new Seicane stereo.

Connect the harnesses to the back of the new Seicane stereo

Connect the harnesses to the back of the new Seicane stereo

11. Connect the Seicane stereo to your original car radio’s plugs.

12. Put the new Seicane stereo into the dash.

13. Turn on the new Seicane stereo and check whether the unit is working properly. If not, please check whether all the cables are connected correctly.

14. Install screws and the panel, and put everything into their original place.

 

After reading the above stereo installation guide, do you have a general understanding of the whole installation process for the 2006-2011 Honda CR-V stereo. If you have any questions, you can contact with your dealer for seeking a wiring diagram or turn to a professional for help. To help you better select an ideal stereo, you can refer to the following link which is a 2006-2011 Honda CR-V stereo from Seicane.

http://www.seicane.com/seicane-s1276898-8-inch-2006-2011-honda-cr-v-android-dvd-navigation-car-stereo-with-3g-wifi-radio-rds-bluetooth-mirror-link-obd2-rearview-camera-steering-wheel-control-hd-1080p-video-mp3

Coming with the advanced Android 5.1.1 operation system as well as a high-quality RK3188 1.6 GHz Cortex A9 Quad-core processor, this stereo greatly facilitates its operation and offer users the best services with its high performance and configuration. A wide range of features are supported by this stereo, including the built-in 3D GPS Navigation System, Bluetooth technology, DVD player, FM/AM radio, USB/SD Connection, etc. Additionally, there are various audio and video formats supported by this stereo, such as DVD, VCD, CD, MP3 etc, which can satisfy almost all your different entertaining needs. Don’t hesitate to install this multifunctional 2006-2011 Honda CR-V stereo in your car. Good luck to you!

Posted in Uncategorized. Tagged with .