http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Monthly Archives: December 2016

How to Upgrade a 2015 2016 SUZUKI VITARA Radio with Bluetooth Audio GPS in a Fastest Way

If you plan to upgrade your factory radio with less money, then this article on the 2015 2016 SUZUKI VITARA car stereo installation guide will offer you some help. Since the installation process of a car stereo is not so difficult that you can also finish the installation by yourself under the guidance of a correct installation instruction. Today I would like to introduce how to remove and install a 2015 2016 SUZUKI VITARA car stereo. If you own the same vehicle type, you may refer to the following instruction as a reference to help with the installation.

2015 2016 SUZUKI VITARA Radio after installation

2015 2016 SUZUKI VITARA Radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2015 2016 SUZUKI VITARA car stereo installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

It is quite normal when you encounter some questions in the process of the installation. In that case, you can seek help from your dealer or a professional. And if you are still searching for a suitable car stereo for your car, you can refer to the following link which is an amazing 2015 2016 SUZUKI VITARA car stereo from Seicane and can be installed in your car seamlessly.

http://www.seicane.com/10-2-inch-hd-touchscreen-android-2015-2016-suzuki-vitara-radio-bluetooth-gps-navigation-car-stereo-with-obd2-4g-wifi-cpu-quad-core-backup-camera-mirror-link-steering-wheel-control-s301165

This car stereo is upgraded to the advanced Android 5.0.1 operation system and a powerful R16 1.8 GHz A9 Quad-core processor to enhance the capabilities as well as facilitate the operation.

For the practical functions, you can be provided with the text-to-speech guidance which can effectively lead you to reach anywhere you like with the help of the built-in 3D GPS navigation system. While for the entertainment options, both you and your passengers can be pleased by a lot of entertainment ways supported by this car stereo, such as playing DVDs, CD, VCD, music, TV programs and movies, etc. Wish you like this 2015 2016 SUZUKI VITARA car stereo and take it along with your trip right now!

Posted in Uncategorized. Tagged with .

How to Upgrade a 2016 Jeep Grand Cherokee Bluetooth Car Stereo Navigation to Solve Radio Problems

If you’re a car driver and usually spend a lot of time on driving, you must find you will easily get tired and bored during a long trip. Under that circumstance, a great car radio can be your best road companion for you to refresh yourself effectively. If you want to not only create a comfortable and convenient in-car environment but also a brand new driving experience, you can upgrade your factory radio with an advanced all-in-one stereo. If you own a 2016 Jeep Grand Cherokee , you can follow the guide below for installation details.

2016 Jeep Grand Cherokee Bluetooth Car Stereo Navigation after installation

2016 Jeep Grand Cherokee Bluetooth Car Stereo Navigation after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2016 Jeep Grand Cherokee car stereo installation guide

1. Prepare a plastic removal tool. Remove the AC control panel.

Prepare a plastic removal tool. Remove the AC control panel

Prepare a plastic removal tool. Remove the AC control panel

1-1

1-1

2. Remove two screws below.

Remove two screws below

Remove two screws below

2-1

2-1

3. Remove the radio trim panel with a plastic removal tool.

Remove the radio trim panel with a plastic removal tool

Remove the radio trim panel with a plastic removal tool

3-1

3-1

4. Unscrew four screws that are holding the radio on the dashboard.

Unscrew four screws that are holding the radio on the dashboard

Unscrew four screws that are holding the radio on the dashboard

5. Gently remove the original radio.

Gently remove the original radio

Gently remove the original radio

6. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio

Disconnect the connectors and cables at the back of the radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original stereo’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

That’s all about how to remove and install a 2016 Jeep Grand Cherokee Bluetooth Car Stereo Navigation. If you have any questions, you can contact your dealer for a wiring diagram or ask a professional for help to avoid unnecessary mistakes. Besides, if you don’t know which kind of car stereo can fit your car well, you can check out the following link which is a high-end 2016 Jeep Grand Cherokee Bluetooth Car Stereo Navigation from Seicane and can fit your car perfectly.

http://www.seicane.com/10-2-inch-android-radio-gps-navigation-system-2016-jeep-grand-cherokee-with-obd2-dvr-4g-wifi-bluetooth-backup-camera-mirror-link-steering-wheel-control-s301139

Upgraded to the advanced Android 5.0.1 operation system and loaded with a powerful R16 1.8GHz A9 Quad-core processor, this up-to-date car radio largely enhances its processing ability for users.

With the help of the high-precision 3D GPS navigation system, you will be accurately guided to your destinations any time any where. Under the bluetooth technology, you are able to pair your bluetooth-enabled cell phones with the bluetooth of this stereo so as to freely get access to hands-free calls and streaming music, which can promise you a safe and cheerful driving all the time.

Just install this intelligent 2016 Jeep Grand Cherokee Bluetooth Car Stereo Navigation in your car and go with great convenience and pleasure!

Posted in Uncategorized.

A Common Way to Upgrade a 2007-2015 Mitsubishi Lancer Stereo with CD Speakers Audio System

As you know, to install an advanced all-in-one car radio in your car will bring you great convenience as well as pleasure. That’s why more and more car owners replace their factory radio with modern aftermarket car stereos. You don’t have to worry that the installation is too complicated since you can easily finish it under the guidance of a related installation guide. The following is an instruction on the installation of 2007-2015 Mitsubishi Lancer car stereo. You may refer to it.

2007-2015 Mitsubishi Lancer Stereo after installation

2007-2015 Mitsubishi Lancer Stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007-2015 Mitsubishi Lancer car stereo installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Wish the above installation guide can do some help for your upgrading. If you have any questions, it’s suggested you turn to a professional or your dealer for help. To help you better choose a suitable car stereo for your car, I’d like to share an amazing 2007-2015 Mitsubishi Lancer car stereo from Seicane to you.

http://www.seicane.com/10-2-inch-android-2007-2015-mitsubishi-lancer-radio-gps-navigation-system-with-obd2-tpms-4g-wifi-bluetooth-steering-wheel-control-backup-camera-mirror-link-dvr-s301133

This unit is upgraded to Android 5.0.1 operation system and R16 1.8 GHz A9 Quad-core processor, so you can utilize the latest hardware and software for car stereos. With the built-in GPS navigation of high precision, you can get to any destinations you like through the turn-by-turn directions and voice prompts. And under the bluetooth technology, you can make your enabled mobile phone wirelessly sync with this stereo for get hands-free calls and streaming music. Besides, the additional entertainment features can add a lot of fun to your driving. Wish you like it!

Posted in Uncategorized. Tagged with .

The Top Instruction on a 2015 Ford Edge Bluetooth DVD Stereo Upgrade with Audio GPS Navigation System

Are you searching online for a 2015 Ford Edge Bluetooth DVD Stereo installation guide? As you know, a step-by-step 2015 Ford Edge Bluetooth DVD Stereo installation guide can be much helpful during the whole process of the installation of a new car radio. If you own a 2015 Ford Edge and plan to upgrade your factory radio, you can read this article carefully for reference before the removal of your original car radio and the installation of your new car radio.

2015 Ford Edge Bluetooth DVD Stereo after installation

2015 Ford Edge Bluetooth DVD Stereo after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2015 Ford Edge car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Pry the panel and then remove it with a plastic removal tool.

Pry the panel and then remove it with a plastic removal tool

Pry the panel and then remove it with a plastic removal tool

3. Pull out two side little trim panel.

Pull out two side little trim panel

Pull out two side little trim panel

4. Pull up the center console and release the storage box.

Pull up the center console and release the storage box

Pull up the center console and release the storage box

4-1

4-1

5. Remove the radio trim panel.

Remove the radio trim panel

Remove the radio trim panel

6. Unscrew four screws holding the screen, take out the screen and then unplug the connectors at the back of it.

Unscrew four screws holding the screen, take out the screen and then unplug the connectors at the back of it

Unscrew four screws holding the screen, take out the screen and then unplug the connectors at the back of it

6-1

6-1

7. Remove screws that are holding the radio.

8. Take out the radio and then disconnect the connectors at the back of the radio.

9. Check all the accessories for the new Seicane car radio.

10. Connect the harnesses to the back of the new Seicane car radio.

11. Connect the Seicane car radio to your original stereo’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

 

You may encounter some problems during the whole installation process, under that circumstance; you can browse some related website for help or seek professional advice from technicians. The following is a link about an up-to-date 2015 Ford Edge Bluetooth DVD Stereo from Seicane, you can take it as a reference before your upgrading.

http://www.seicane.com/10-2-inch-android-2015-ford-edge-radio-gps-navigation-system-with-hd-touch-screen-backup-camera-tpms-steering-wheel-control-mirror-link-bluetooth-obd2-dvr-s301123

This 2015 Ford Edge Bluetooth DVD Stereo is running on the advanced Android 5.0.1 operation system which can greatly smooth the operation as well as offer a stable system. It enables you to enjoy a wonderful display for watching DVDs, CDs, TV programs, dramas and music videos, etc, since it comes with a digital multi-touch screen with 1024*600 HD pixel resolution. Besides, as for its practical function, with the built-in GPS navigation system, you will arrive at your desired destination on time with the help of the accurate guidance. Wish this fantastic 2015 Ford Edge Bluetooth DVD Stereo become your indispensable road companion!

Posted in Uncategorized. Tagged with .

How to Upgrade a 2011 Hyundai Accent WIT Hatchback Car Stereo with Bluetooth Music System Smoothly

As everyone knows, a new car radio can bring not only convenience but also enjoyment to both car owners and passengers at the same time. Therefore, more and more car owners are trying to replace the factory radio with a new car radio. With a correct installation guide, the new radio can be easily installed in your car. The following is a step-by-step 2011 Hyundai Accent WIT Hatchback Car Stereo installation guide from Seicane for the reference of car owners of 2011- Hyundai Accent WIT Hatchback.

2011 Hyundai Accent WIT Hatchback Car Stereo after installation

2011 Hyundai Accent WIT Hatchback Car Stereo after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011- Hyundai Accent WIT Hatchback car radio installation guide

1. Use a plastic removal tool to pry the trim panel and remove it.

Use a plastic removal tool to pry the trim panel and remove it

Use a plastic removal tool to pry the trim panel and remove it

1-1

1-1

2. Disconnect connectors at the back of the panel.

Disconnect connectors at the back of the panel

Disconnect connectors at the back of the panel

2-1

2-1

3. Unscrew four screws that fixed the radio on the dashboard.

Unscrew four screws that fixed the radio on the dashboard

Unscrew four screws that fixed the radio on the dashboard

4. Gently take out the original radio.

Gently take out the original radio

Gently take out the original radio

5. Unplug connectors and cables at the back of the radio.

Unplug connectors and cables at the back of the radio

Unplug connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

That’s all about how to remove and install a 2011 Hyundai Accent WIT Hatchback Car Stereo. Wish you can get some help from it. If you have anything you cannot understand, you can turn to your dealer or a professional for help. If you don’t have a suitable car radio for your car, I’d like to share an ideal 2011 Hyundai Accent WIT Hatchback Car Stereo from Seicane with you. For more details, please click:

http://www.seicane.com/9-inch-1024-600-touchscreen-2011-hyundai-accent-wit-hatchback-android-radio-bluetooth-gps-navigation-system-with-4g-wifi-steering-wheel-obd2-control-mirror-link-s30928

This all-in-one car radio is specially designed for the factory radio upgrade of 2011- Hyundai Accent WIT Hatchback. Featured with the advanced Android 5.0.1 operation system and a powerful R16 1.8GHz A9 Quad-core CPU, you can take your car radio up a notch because of its high configuration and performance. The built-in GPS navigation makes it easier to locate where you are and lead you to your destinations with turn-by-turn directions and voice prompts. Besides, a large amount of entertainment options to play DVDs, CDs, music, TV programs, etc. are supported to make your long tiring driving be filled with joy and comfort. Wish you like it!

Posted in Uncategorized. Tagged with .

The Ultimate Guide on Installing a 2007 KIA Cerato Bluetooth DVD Stereo Radio with Bluetooth GPS Navigation System

A new car stereo can not only bring a lot of convenience to car owners but also offer a lot of entertainment at the same time. Therefore, more and more car owners have successfully upgraded their factory radio by installing a new aftermarket car stereo. If you also have such a plan, it is necessary for you to find a correct installation instruction. The following is a detailed 2007 KIA Cerato Bluetooth DVD Stereo Radio installation instruction from Seicane for your reference to help with the stereo installation.

2007 KIA Cerato Bluetooth DVD Stereo Radio after installation

2007 KIA Cerato Bluetooth DVD Stereo Radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2007 KIA Cerato car stereo installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Use a plastic removal tool to remove the panel and unplug the connectors at the back.

Use a plastic removal tool to remove the panel and unplug the connectors at the back

Use a plastic removal tool to remove the panel and unplug the connectors at the back

2-1

2-1

3. Unscrew screws that fixed the radio on the dashboard.

Unscrew screws that fixed the radio on the dashboard

Unscrew screws that fixed the radio on the dashboard

4. Gently pull out the original radio.

Gently pull out the original radio

Gently pull out the original radio

5. Disconnect the connectors and cables at the back.

Disconnect the connectors and cables at the back

Disconnect the connectors and cables at the back

6. Check all the accessories for the new Seicane car stereo.

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

During the installation, you may encounter some difficulties you cannot overcome independently. Under this circumstance, you can turn to your dealer, someone experienced or a professional for help. By the way, have you got your ideal car stereo? If not, I’d like to recommend an excellent 2007 KIA Cerato Bluetooth DVD Stereo Radio from Seicane to you. Here is the related link, please click:

http://www.seicane.com/10-2-inch-2007-kia-cerato-android-radio-bluetooth-gps-navigation-system-with-digital-tv-backup-camerm-usb-rds-aux-4g-wifi-mirror-link-cpu-quad-core-s301105

This powerful 2007 KIA Cerato Bluetooth DVD Stereo Radio comes with a wide range of practical and entertainment features to provide you with the greatest convenience, such as GPS navigation system, Bluetooth technology, DVD player, USB connection, etc. When you turn on the GPS navigation function, you will find it easier to get to your destinations as you are provided with the accurate direction information and voice prompts. What’s more, through the wireless connection between your enabled cell phone and this stereo, you can freely get access to have hands-free calls and enjoy Bluetooth streaming from your mobile phone. Wish you have a good time with it!

Posted in Uncategorized. Tagged with .

How to Replace a 2013 Honda Accord 9 2.4L Car Stereo with an Aftermarket Stereo Speaker Navigation System Head Unit Rapidly

Keeping relaxed all the way and having a comfortable in-car environment is what almost all car owners want to pursue while driving cars on all trips. Now a remarkable car stereo can make your dream come true. Actually, it is not difficult to install a new car stereo. With some installation experience and a correct guide, you can easily achieve the installation. The following is a 2013 Honda Accord 9 2.4L Car Stereo installation guide. If you have the same dashboard, you can follow the detailed installation guide.

2013 Honda Accord 9 2.4L Car Stereo after installation

2013 Honda Accord 9 2.4L Car Stereo after installation

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2013 Honda Accord 9 2.4L car stereo installation guide

1. Use a plastic removal tool to remove the side panels.

Use a plastic removal tool to remove the side panels

Use a plastic removal tool to remove the side panels

2. Remove two screws that fix the pocket.

Remove two screws that fix the pocket

Remove two screws that fix the pocket

3. Remove the pocket.

Remove the pocket

Remove the pocket

4. Use a plastic removal tool to release the panel to the left of the radio.

Use a plastic removal tool to release the panel to the left of the radio

Use a plastic removal tool to release the panel to the left of the radio

5. Use the plastic removal tool to pry the top tray and remove it.

Use the plastic removal tool to pry the top tray and remove it

Use the plastic removal tool to pry the top tray and remove it

6. There are two top screws and two bottom screws that are holding the radio, remove them with a screwdriver.

There are two top screws and two bottom screws that are holding the radio, remove them with a screwdriver

There are two top screws and two bottom screws that are holding the radio, remove them with a screwdriver

6-1

6-1

7. Pull out the original radio and disconnect connectors at the back of it.

Pull out the original radio and disconnect connectors at the back of it

Pull out the original radio and disconnect connectors at the back of it

8. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

9. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

10. Connect the Seicane car stereo to your original stereo’s plugs.

11. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car stereo into the dash.

13. Put everything into their original place. All the installation is done.

 

Wish the above installation can help with your installation. If you meet with difficulties and don’t know how to overcome them, you can seek valuable advice from your dealer or ask a professional for help. But if you are still searching online for a suitable car stereo at a reasonable price and with a wide range of features, I’d like to recommend a 2013 Honda Accord 9 2.4L Car Stereo from Seicane to you. You may check out the link below.

http://www.seicane.com/2013-honda-accord-9-2-4-10-2-inch-android-radio-bluetooth-gps-navigation-system-with-1024-600-touchscreen-1080p-obd2-tpms-backup-camera-digital-tv-dvr-4g-wifi-steering-wheel-control-s301092

Featured with the advanced Android 5.0.1 operation system as well as a R16 1.6 GHz Quad-core CPU processor, this 2013 Honda Accord 9 2.4L Car Stereo enables users to embrace a smoother and faster operation experience than ever before. Besides, this car stereo also provides users with the best viewing effect not only about the road condition but also on entertainment features. Moreover, this car stereo is also compatible with many new features, like 3D GPS, Bluetooth module, DVD player, etc. These features are all supported to offer users the best services. If you like it, don’t hesitate to add it to your cart.

Posted in Uncategorized. Tagged with .

A Must-see Tutorial on a 2014 2015 HONDA FIT Car Stereo Upgrade with Aftermarket Audio Speaker Navigation Accessories

Look at the image below. It is the Seicane 2014 2015 HONDA FIT Car Stereo after installation. This car stereo comes with not only practical but also entertainment features. If you have a plan to replace your factory radio with a brand new modern one for your 2014 2015 HONDA FIT, this Seicane 2014 2015 HONDA FIT car stereo can be taken into consideration and you may refer to the following installation guide.

2014 2015 HONDA FIT Car Stereo after installation

2014 2015 HONDA FIT Car Stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2014 2015 HONDA FIT Car Stereo installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Wish you can get some help from the above installation guide. During the whole installation process, if you have any questions, you can seek help from your dealer, someone experienced or a professional. Besides, it is very important for you to confirm that your new car stereo can work well in your car. If you are still looking for a suitable radio, I’d like to recommend a 2014 2015 HONDA FIT Car Stereo from Seicane to you. Here comes the link, please click:

http://www.seicane.com/10-inch-2014-2015-honda-fit-1024-600-touchscreen-android-radio-bluetooth-gps-navigation-system-with-backup-camera-4g-wifi-mirror-link-tpms-usb-aux-digital-tv-steering-wheel-control-s301088

This Seicane 2014 2015 HONDA FIT car stereo will be ideal enough for you to upgrade your factory stereo since it is integrated with both upgraded features and new functions. With the assistance of the built-in 3D GPS navigation system, you can be accurately guided to your destination with turn-by-turn direction and voice prompts. Under the Bluetooth technology, you are able to easily get access to hands-free calls and streaming music from your phone music playlists, which can keep you safe and cheerful on all trips. Just enjoy more convenience and joyfulness brought by this remarkable car stereo in your car. Good luck to you!

Posted in Uncategorized. Tagged with .

8 Simple Tips on a 2012 Honda Civic Bluetooth DVD Car Stereo Upgrade with Stereo Speaker Audio Sound System

At present, there is a good phenomenon that more and more car owners choose to upgrade their factory radios by themselves, which can help decrease some budgets. Actually, with a step-by-step installation guide and some related experience, you can also finish the car stereo installation on your own. The following is a detailed installation guide for a 2012 Honda Civic Bluetooth DVD Car Stereo. If you have the same dashboard, you can read it and take it as a reference.

2012 Honda Civic Bluetooth DVD Car Stereo after installation

2012 Honda Civic Bluetooth DVD Car Stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2012 Honda Civic car stereo installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Wish the above installation steps can help you finish the whole car stereo installation process. If there are any questions, you can turn to your dealer, someone experienced or a professional for help. Besides, it is especially vital for you to check whether your new car stereo fits well with your car or not. If not, I’d like to share a 2012 Honda Civic Bluetooth DVD Car Stereo with you. You may check out the link for more details.

http://www.seicane.com/andriod-10-2-inch-2012-honda-civic-radio-gps-navigation-car-stereo-with-bluetooth-digital-tv-mirror-link-obd2-dvr-backup-camera-tpms-rds-steering-wheel-control-s301086

This great 2012 Honda Civic Bluetooth DVD Car Stereo enables you to have the best route option to get to your destinations since it is featured with the worldwide real-time 3D GPS navigation system. Besides, without keeping your hands off the steering wheel, you can also dial, receive or reject hands-free calls as well as enjoy streaming music from your phone music playlists by wirelessly linking your enabled phone with this car stereo which can greatly guarantee you driving safety and enjoyment.

Just have a safe and pleasant trip with this wonderful 2012 Honda Civic car stereo installed in your car. Good luck to you!

Posted in Uncategorized. Tagged with .

Beginner’s Guide to Update a 2013 2014 2015 Nissan Teana Bluetooth DVD Car Radio with Dashboard Audio GPS Navigation System

Nowadays, it is a common phenomenon that more and more car owners choose to install a car radio with modern features so as to create a more convenient and comfortable in-car environment as well as improve a better driving experience. If you have a plan to upgrade your 2013 2014 2015 Nissan Teana Bluetooth DVD Car Radio on your own, you may refer to the following guidance to get some ideas about your installation.

2013 2014 2015 Nissan Teana Bluetooth DVD Car Radio after installation

2013 2014 2015 Nissan Teana Bluetooth DVD Car Radio after installation

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2013 2014 2015 Nissan Teana car radio installation guide

1. Unclip the right side of the driver knee bolster panel next to the center console and let hang.

Unclip the right side of the driver knee bolster panel next to the center console and let hang

Unclip the right side of the driver knee bolster panel next to the center console and let hang

2. Unclip and remove the 2 silver side trim panels from each side of the factory radio.

Unclip and remove the 2 silver side trim panels from each side of the factory radio

Unclip and remove the 2 silver side trim panels from each side of the factory radio

3. Remove 4 screws securing the factory radio, ac control and ac vent.

Remove 4 screws securing the factory radio, ac control and ac vent

Remove 4 screws securing the factory radio, ac control and ac vent

4. Unclip and remove trim panel below the ac control panel.

Unclip and remove trim panel below the ac control panel

Unclip and remove trim panel below the ac control panel

5. Remove the ac vent panel, and then unplug connectors.

Remove the ac vent panel, and then unplug connectors

Remove the ac vent panel, and then unplug connectors

5-1

5-1

6. Remove ac climate control.

Remove ac climate control

Remove ac climate control

7. Remove 4 screws holding the radio.

Remove 4 screws holding the radio

Remove 4 screws holding the radio

8. Remove the original radio and unplug connectors.

Remove the original radio and unplug connectors

Remove the original radio and unplug connectors

9. Check all the accessories for the new Seicane car radio.

10. Connect the harnesses to the back of the new Seicane car radio.

8-1

8-1

11. Connect the Seicane car radio to your original stereo’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

 

That’s all about how to remove and install a 2013 2014 2015 Nissan Teana Bluetooth DVD Car Radio. If you don’t have any experience before, you might as well as ask your dealer or someone experienced for help. And you can also arrange a technician to install the radio which can avoid your unnecessary mistakes. To have a perfect installation, you have to confirm that you already have a suitable car radio for your beloved car. If you are still looking for it, you can check the link below which is about a 2013 2014 2015 Nissan Teana Bluetooth DVD Car Radio from Seicane that I would like to recommend to you.

http://www.seicane.com/10-2-inch-android-2013-2014-2015-nissan-tenna-radio-gps-navigation-system-with-backup-camera-dvr-obd2-mirror-link-tpms-4g-wifi-bluetooth-cpu-quad-core-s301068

This great car radio can facilitate your operation because of its Android 5.0.1 operation and 1.8GHz Cortex A9 Quad-core processor. And a wide range of audio and video formats are compatible with this radio, such as VCD, DVD, DIVX, etc, which can satisfy your different entertaining needs. Therefore, both you and your passengers won’t get bored in your journey any more. If you like this 2013 2014 2015 Nissan Teana Bluetooth DVD Car Radio, don’t forget to add it to your cart. Good luck to you!

Posted in Uncategorized. Tagged with .