http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Monthly Archives: September 2016

How to easily install a 2004-2011 Mercedes Benz CLS Class W219 3G navigation head unit with DVD radio 16G Flash

Look at the picture below, do it look familiar? This is the picture of 2004-2011 Mercedes Benz CLS Class W219 3G navigation head unit after installation. If you have the similar or same dashboard, it’s worth for you to read this passage. I’d like to introduce a step-by-step installation instruction for a 2004-2011 Mercedes Benz CLS Class W219 3G navigation head unit from Seicane to you and you can take it as reference.

2004-2011 Mercedes Benz CLS Class W219 3G navigation head unit after installation

2004-2011 Mercedes Benz CLS Class W219 3G navigation head unit after installation

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2004-2011 Mercedes Benz CLS Class W219 3G navigation head unit installation instruction

1. Release the panel from the gearlever by your hands.

Release the panel from the gearlever by your hands

Release the panel from the gearlever by your hands

2. Remove the cigarette lighter and put it aside.

Remove the cigarette lighter and put it aside

Remove the cigarette lighter and put it aside

3. Remove two screws under the CD changer and take out the CD changer.

3-1. Remove two screws under the CD changer and take out the CD changer

3-1. Remove two screws under the CD changer and take out the CD changer

3-2

3-2

4. Remove the two screws under the original radio.

Remove the two screws under the original radio

Remove the two screws under the original radio

5. Pull out the original radio and disconnect the wires.

5-1. Pull out the original radio and disconnect the wires

5-1. Pull out the original radio and disconnect the wires

5-2

5-2

6. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit

Check all the accessories for the new Seicane head unit

7. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit

Connect the harnesses to the back of the new Seicane head unit

8. Put the new Seicane unit into the dash.

9. Turn on the new Seicane unit and have a comprehensive check if it works well. If not, please check whether all the cables are connected correctly.

 

After reading this installation instruction for a 2004-2011 Mercedes Benz CLS Class W219 3G navigation head unit, you can try to install it by yourself. If you have any problems, you can go to the dealer or professional ask for help. Or arrange them to install it directly. Beyond that, it’s very necessary for you to check whether the new car stereo can work well in your car or not. If you are still looking for one, I’d like to recommend a wonderful 2004-2011 Mercedes Benz CLS Class W219 3G navigation head unit from Seicane to you. Here is the link:

http://www.seicane.com/seicane-s127501-oem-2004-2011-mercedes-benz-cls-class-w219-cls350-cls500-cls55-dvd-android-dvd-bluetooth-in-dash-radio-navigation-system-with-mirror-link-obd2-3g-wifi-backup-camera-usb-sd

This powerful 2004-2011 Mercedes Benz CLS Class W219 3G navigation head unit running on Android 5.1.1, which is currently one of the best GPS running operating system features lane assist, voice guidance, 3D views, intelligent route planning, points of interest (POI) notifications and more. There is also the standard AM and FM radio receiver as well as the ability to play CDs ,you can play music directly from your MP3 player through your car speakers. Why not take it right now?

Posted in Uncategorized. Tagged with .

How to install a 2005-2010 Toyota Fortuner 3G USB DVD GPS with Quad-core CPU Bluetooth OBD

Do you want to download the applications in your dvd radio? If you want, this newest 2005-2010 Toyota Fortuner 3G USB DVD GPS is one of your best choice. You can download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. You can also install or remove of apps on RAM or SD optionally. I’d like to introduce the installation instruction for a 2005-2010 Toyota Fortuner 3G USB DVD GPS from Seicane in here for your reference.

2005-2010 Toyota Fortuner 3G USB DVD GPS after installation

2005-2010 Toyota Fortuner 3G USB DVD GPS after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2005-2010 Toyota Fortuner 3G USB DVD GPS installation instruction

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane head unit.

7. Connect the harnesses to the back of the new Seicane head unit.

8. Connect the Seicane head unit to your original car radio ‘s plugs.

9. Put the new Seicane head unit into the dash.

10. Turn on the new Seicane head unit and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

That’s all the installation instruction for a 2005-2010 Toyota Fortuner 3G USB DVD GPS. If you have any questions about the installation, it suggests you to the dealer or professional to ask them install directly. In addition, it’s necessary for you to choose the suitable dvd radio for your car. If you don’t know how to choose it, I’d like to recommend a upgrade 2005-2010 Toyota Fortuner 3G USB DVD GPS from Seicane to you. Here is the link:

http://www.seicane.com/2005-2010-toyota-fortuner-android-gps-navigation-system-dvd-player-radio-mirror-link-hd-touch-screen-obd-dvr-rearview-camera-tv-usb-sd-3g-wifi-bluetooth-ipod-s166229

The 2005-2010 Toyota Fortuner 3G USB DVD GPS comes with 600Mhz Mali-400 MP4 GPU, intelligent pure android 5.1.1 operation system. The system supports surfing internet via 3G or WiFi. You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet. Enjoy your trips with it from now!

Posted in Uncategorized. Tagged with .

9 easy steps to install a 2001-2008 Toyota RAV4 car stereo with Bluetooth GPS Navigation 3G WIFI

Have you tried to answer a phone call while you are driving? It’s a inconvenient and dangerous thing to answer the phone with your hands while you are driving. The best way for you is to upgrade your old factory radio to a new car stereo with the Bluetooth function. You can make a hands-free call, you can dial, answer, reject and mute calls without taking your hands off the steering wheel. So, in here I’d like to introduce a 2001-2008 Toyota RAV4 car stereo installation guide from Seicane to you for your reference.

2001-2008 Toyota RAV4 after installation

2001-2008 Toyota RAV4 after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2001-2008 Toyota RAV4 car stereo installation guide

1. Remove the panel with a lever on the both side and disconnect the wire.

1-1. Remove the panel with a lever and pull it away from dash

1-1. Remove the panel with a lever and pull it away from dash

1-2

1-2

2. Unscrew the four bolts holding the original car radio.

Unscrew the four bolts holding the original car radio

Unscrew the four bolts holding the original car radio

3. Take out the car radio and disconnect the wire harness at the back of the unit.

3-1. Take out the car radio and disconnect the wire harness at the back of the unit

3-1. Take out the car radio and disconnect the wire harness at the back of the unit

3-2

3-2

4. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

5. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

6. Connect the Seicane car radio to your original car radio ‘s plugs.

7. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

8. Put the new Seicane radio into the dash.

9. Put everything into their original place. All the installation is done.

This is the detailed installation guide for a 2001-2008 Toyota RAV4 car stereo. Wish you can learn something from that. If you have any problem, please go to the dealer or professional ask for help. Besides, you have to check whether the new car stereo can work well in your car. If you are looking for one, this is a newest 2001-2008 Toyota RAV4 car stereo from seicane and you can check it carefully.

http://www.seicane.com/oem-android-gps-navigation-dvd-player-radio-for-2001-2008-toyota-rav4-with-bluetooth-hd-touch-screen-obd-dvr-rear-view-camera-tv-usb-sd-3g-wifi-ipod-mirror-link-s166957

This amazing 2001-2008 Toyota RAV4 car stereo upgrades your car with BC6 Bluetooth module, supports surfing internet via 3G or WiFi and equipped with worldwide real-time navigation function of high accuracy. If you want to enjoy the most up-to-date entertainment function, let’s purchase it and enjoy the time with it from now!

Posted in Uncategorized. Tagged with .