http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Monthly Archives: August 2016

How to replace a 2010-2013 Nissan March with DVD Player Radio in Several steps

Want to upgrade your DVD player Radio? Have trouble with how to remove it? Have trouble with how to install it? Here is the most useful and easy to learn ways for you to deal with your 2010-2013 Nissan March from Seicane. Just in several steps can you finish the replacement of your car radio. Now please pay attention to read the following steps which is useful for all of the Nissan March owners.

2010-2013 Nissan March after installation

2010-2013 Nissan March after installation

Precautions for this installation:

1.Parking your car in the right place before you start any work.

2.Making sure your power supply is off and remove your key in case of any danger.

3.If you want to clean your dashboard, please use clean dried cloth instead of cleaning products.

4.Here are some useful tools recommended to you for this removal and installation. Please click here for more information: http://www.seicane.com/car-dvd-dismantling-device-srd-400

Nissan March DVD player radio installation instruction:

1. This is the plastic knife you can use to remove the original console panel. From the right side of the panel along the gap. Then pull it gently.

This is the plastic knife you can use to remove the original console panel. From the right side of the panel along the gap. Then pull it gently

This is the plastic knife you can use to remove the original console panel. From the right side of the panel along the gap. Then pull it gently

2.There will be a small tab on the back of the button.

There will be a small tab on the back of the button

There will be a small tab on the back of the button

3. So you should press the tab to get it free. Now you can set it aside.

So you should press the tab to get it free. Now you can set it aside

So you should press the tab to get it free. Now you can set it aside

4. The fours crews are fixed in the dashboard. Remove them with gimlet from right to left.

The fours crews are fixed in the dashboard. Remove them with gimlet from right to left

The fours crews are fixed in the dashboard. Remove them with gimlet from right to left

5.Unplug the tab on the back of the stereo.

Unplug the tab on the back of the stereo

Unplug the tab on the back of the stereo

6. Plug the tab to the connectors.

Plug the tab to the connectorsPlug the tab to the connectors

Plug the tab to the connectors

7. There will be three lines left for your new stereo. So far the removal of the radio is completed. Next steps will be the installation of the stereo.

8. Check all the accessories of the new Seicane stereo.

9. Install the brackets on both sides of Seicane Nissan MARCH Radio.

10. Dock the connectors of the original vehicle and the up graded stereo.

11. Insert the wires to the appropriate place of the radio.

12. Fix the Seicane Radio with the four screws.

13. Firm the console panel. The installation is completed and now you can begin your test of this radio.

That’s all about how to remove and install 2010-2013 Nissan March Radio. For a newbie, if you want to repair your radio, you’d better ask someone professional to do it. If you want to know about new DVD player radio, here is the best choice for you from Seicane:

http://www.seicane.com/android-aftermarket-car-stereo-navigation-system-for-2010-2011-nissan-march-with-dvd-player-radio-3g-wifi-bluetooth-mirror-link-hd-1024-600-touch-screen-obd2-dvr-ipod-rearview-camera-tv-usb-sd-1080p-video-s167043

With the useful Bluetooth, you can avoid danger during your trip while you answer your phone or listen to music. The rearview camera also bring you a safe trip. Enjoy your leisure time with powerful Android 5.1.1 and HD 1024*600 touch Screen OBD2.

Posted in Uncategorized. Tagged with .

How to install a 2006-2012 Toyota RAV4 head unit with Mirror Link HD Touch Screen OBD DVR Rearview Camera TV

Have you enjoyed the convenience and comfort from your car with the old factory radio? If the answer is no. It’s time for you to upgrade your stock radio. With the new head unit, it can not only improve your car interior environment, but also take your driving experience up a notch. So, in here I’d like to share a detailed installation guide for a 2006-2012 Toyota RAV4 head unit from Seicane with you. Wish you can learn something from this passage.

2006-2012 Toyota RAV4 after installation

2006-2012 Toyota RAV4 after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2012 Toyota RAV4 head unit installation guide

1. Prize open the right side decoration board with tools.

Prize open the right side decoration board with tools

Prize open the right side decoration board with tools

2. Plug out the wiring connections of right side decoration board.

Plug out the wiring connections of right side decoration board

Plug out the wiring connections of right side decoration board

3. In the same way, take down the left side decoration board.

In the same way, take down the left side decoration board

In the same way, take down the left side decoration board

4. Remove the bolts of the original main board.

Remove the bolts of the original main board

Remove the bolts of the original main board

5. Take out the original car radio.

Take out the original car radio

Take out the original car radio

6. Unplug the wiring connections at the back of the original car radio.

Unplug the wiring connections at the back of the original car radio

Unplug the wiring connections at the back of the original car radio

7. Dismantle the brackets on both sides of the original radio.

8. Fix the brackets onto the two sides of the new Seicane radio.

9. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

10. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

11. Connect the Seicane car radio to your original car radio ‘s plugs.

12. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane radio into the dash.

14. Put everything into their original place. All the installation is done.

This is all the detailed installation guide for a 2006-2012 Toyota RAV4 head unit. Wish you can get some help and install the new head unit after reading this passage. If you have any question about installation, it suggests you to the dealer or professionals for help. Besides, you need to make sure whether the new head unit can work in your car. If you still looking for one, I’d like to recommend a great 2006-2012 Toyota RAV4 head unit from Seicane to you.

http://www.seicane.com/oem-android-radio-bluetooth-dvd-player-gps-navigation-system-for-2006-2012-toyota-rav4-with-mirror-link-hd-touch-screen-obd-dvr-rear-view-camera-tv-usb-sd-3g-wifi-ipod-s167015

This 2006-2012 Toyota RAV4 head unit is highly recommended for you to replace the stock radio. Running on Android 5.1.1 which is the most advanced operation system at present and equipped with an amazing 1.6 GHz Cortex A9 Quad-core CPU, this car stereo will provide you with a smoother and quicker operation experience than ever before. The price of this unit is so affordable at present that it is worth to have this wonderful unit with you for great convenience and enjoyment on the all journey later on!

Posted in Uncategorized. Tagged with .

How to install a 2008-2015 Mazda 6 Ultra head unit with DVD GPS Radio Bluetooth Quad-core CPU Mirror link OBD

With a new head unit in your car, you can get to your destination with a 3D navigation system and enjoy the favorite songs when you driving. This functions are desired by every car owner. Is it difficult for me to install the new head unit? Of course not. With this detailed installation guide for a 2008-2015 Mazda 6 Ultra head unit from Seicane, you can install it easily with your hands.

2008-2015 Mazda 6 Ultra after installation

2008-2015 Mazda 6 Ultra after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008-2015 Mazda 6 Ultra head unit installation guide

1. Remove your cup holder.

Remove your cup holder

Remove your cup holder

2. Unscrew and remove the shift knob.

Unscrew and remove the shift knob

Unscrew and remove the shift knob

3. Remove the shift trim panel with your hands.

Remove the shift trim panel with your hands

Remove the shift trim panel with your hands

4. Then remove both sides trim panel of the heat control.

Then remove both sides trim panel of the heat control

Then remove both sides trim panel of the heat control

5. Pull out the panel and set it aside.

Pull out the panel and set it aside

Pull out the panel and set it aside

6. Remove four screws on each side of the heat control with a Phillips-screwdriver.

Remove four screws on each side of the heat control with a Phillips-screwdriver

Remove four screws on each side of the heat control with a Phillips-screwdriver

7. Pull out the heat control slowly.

Pull out the heat control slowly

Pull out the heat control slowly

8. Find two screws under the radio and remove them.

Find two screws under the radio and remove them

Find two screws under the radio and remove them

9. Push the top panel and set it aside.

Push the top panel and set it aside

Push the top panel and set it aside

10. Remove two screws with a Phillips-screwdriver as the picture shows.

Remove two screws with a Phillips-screwdriver as the picture shows

Remove two screws with a Phillips-screwdriver as the picture shows

11. Pull out the factory radio slowly.

Pull out the factory radio slowly

Pull out the factory radio slowly

12. Disconnect the original harness and set the factory radio aside.

Disconnect the original harness and set the factory radio aside

Disconnect the original harness and set the factory radio aside

13. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

14. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

15. Connect the Seicane car radio to your original car radio ‘s plugs.

16. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane radio into the dash.

18. Put everything into their original place. All the installation is done.

Above all, wish you can learn something from this detailed installation guide for a 2008-2015 Mazda 6 Ultra head unit. If you have any questions about this installation, you can turn to the dealer or professionals ask for help. In addition, you have to find the suitable new head unit for your car first. Here is the link of a 2008-2015 Mazda 6 Ultra head unit from Seicane. If you are looking for one, you can take it as reference.

http://www.seicane.com/8-inch-touch-screen-radio-android-gps-navigation-system-for-2008-2015-mazda6-ultra-with-dvd-player-bluetooth-mirror-link-obd-dvr-rear-view-camera-tv-usb-sd-3g-wifi-ipod-s168001

Take your car interior into next level with this popular In dash Car DVD player specially designed for 2008-2015 Mazda 6 Ultra. Contributed to its 3D GPS system of high accuracy, you can arrive at your desired location with ease. Hands-free calls and streaming music are available if you pair your Bluetooth-enabled mobile phones with this unit. For entertainment, you can play DVD, CD, VCD, MP3, MP4, etc. to relax on all trips. Good luck to you!

Posted in Uncategorized. Tagged with .

An easy installation instruction for a 2005-2010 Skoda FABIA car stereo with Android 5.1.1 Radio DVD navigation HD touch screen Mirror link

Here I’d like to introduce an easy installation instruction for a 2005-2010 Skoda FABIA car stereo from Seicane. Thanks to the upgraded Android 5.1.1 version and 1.6 GHz Cortex A9 Quad-core CPU, this most advanced car GPS DVD player is available for you to replace the factory radio for your 2005-2010 Skoda FABIA. If you don’t have any experience of installation, you can refer to this passage and learn how to install it by yourself.

2005-2010 Skoda FABIA after installation

2005-2010 Skoda FABIA after installation

Here are some tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible, so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005-2010 Skoda FABIA car stereo installation guide

1.Remove the trim panel with a lever.

Remove the trim panel with a lever

Remove the trim panel with a lever

2. Remove the panel on the radio with your hands.

Remove the panel on the radio with your hands

Remove the panel on the radio with your hands

3. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

4. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

5. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

6. Check all the accessories for the new Seicane car stereo.

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original car radio ‘s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place.

Wish you can get some help after reading this installation guide for a 2005-2010 Skoda FABIA car stereo. If you have any confusion about the installation, you can consult your dealer or professionals for help. Before the installation, you have to find a right new head unit for your car. This is the link of a 2005-2010 Skoda FABIA car stereo from Seicane. If you still looking for one, you can check it.

http://www.seicane.com/android-radio-dvd-player-navigation-system-for-2005-2010-skoda-fabia-with-bluetooth-hd-touch-screen-obd-dvr-rearview-camera-mirror-link-tv-3g-wifi-usb-sd-ipod-s167032

This amazing 2005-2010 Skoda FABIA car stereo coming with 7 inch HD 1024*600 multi-touch screen with smooth operation, high sensitivity and abundant interaction for the better view of your road ahead. Aside from that you can utilize its basic GPS function to arrive at your desired destinations, the Bluetooth pairing allows you to have hands-free calls and enjoy wireless media streaming. You also can use USB input for wired connection to have fun in your journey. Don’t hesitate, enjoy your trips from now!

Posted in Uncategorized. Tagged with .

A professional installation guide for a 2008 2009 2010 Ford S-max head unit with Radio DVD player GPS navigation Capacitive multi-touch screen OBD

With a newest 3D GPS navigation, you can get to the destination directly without asking way. With the newest radio, DVD player and Bluetooth function, you can relax yourself when you driving. So it’s time to upgrade your factory radio to the multifunctional head unit. Here is the picture of the 2008 2009 2010 Ford S-max head unit from Seicane. If you have the same dashboard as below, you can take this installation guide as reference.

2008 2009 2010 Ford S-max after installion

2008 2009 2010 Ford S-max after installion

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008 2009 2010 Ford S-max head unit installation guide

1. Remove the panel with a lever on both sides.

Rmove the panel with a lever on both sides

Remove the panel with a lever on both sides

2.Remove the panel around shift-lever, parking-brake lever and centre console.

2-1.Remove the panel around shift-lever, parking-brake lever and centre console

2-1.Remove the panel around shift-lever, parking-brake lever and centre console

2-2

2-2

3. Unscrew the screws around the trim panel with a screwdriver.

3-1. Unscrew the screws around the trim panel with a screwdriver

3-1. Unscrew the screws around the trim panel with a screwdriver

3-2

3-2

4. Take the panel off the dash and disconnect the wires from the car.

Take the panel off the dash and disconnect the wires from the car

Take the panel off the dash and disconnect the wires from the car

5. Unscrew four screws holding the original radio.

Unscrew four screws holding the original radio

Unscrew four screws holding the original radio

6. Take out the unit and disconnect the wire harness at the back of the unit.

Take out the unit and disconnect the wire harness at the back of the unit

Take out the unit and disconnect the wire harness at the back of the unit

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane radio into the dash.

12. Put everything into their original place.

That’s all the installation guide for a 2008 2009 2010 Ford S-max head unit. It’s quite easy for you to install it by yourself with this installation guide. If you have any questions about the installation, please feel free to the dealer or professionals ask for help. Moreover, before the installation, you have to look for a perfect head unit for your car. I’d one wonderful 2008 2009 2010 Ford S-max head unit to share with you and you can check it in this link:

http://www.seicane.com/android-2008-2009-2010-ford-s-max-radio-dvd-player-gps-navigation-system-bluetooth-capacitive-multi-touch-screen-obd-dvr-usb-sd-rear-view-camera-tv-3g-wifi-mirror-link-ipod-s167017

This modern double din Sat Nav head unit is an ideal replacement for your 2008 2009 2010 Ford S-max. With such a wonderful head unit, you must be greatly impressed by its multiple features like GPS navigation system, Bluetooth, IPod, USB. You can be accurately guided to anywhere you like and keep yourself and your passengers pleasantly entertained all the way in the long-distance travel. This aftermarket car head unit is designed according to the factory radio, therefore, it is just plug and play. The installation is easy, you don’t need to modify or cut any wire for its installation!

Posted in Uncategorized. Tagged with .