http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Monthly Archives: July 2016

Simple 8 steps to install a 2002-2008 Chrysler Aspen Concorde Pacifica car radio with OBD2 Bluetooth GPS WIFI Steering Wheel Control

The old factory radio cannot meet your needs anymore? You have to stop in order to ask the way when you driving? You have to purchase the Bluetooth headset to answer the phone call? All these are shows you should upgrade your factory radio now. The multifunctional car radio will help you to get to the destination directly, enjoy the favorite music and hands-free calls. Here I’d like to show the installation guide for a 2002-2008 Chrysler Aspen Concorde Pacifica car radio from Seicane. Here are the instruction.

2002-2008 Chrysler Aspen Concorde Pacifica after installation

2002-2008 Chrysler Aspen Concorde Pacifica after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2002-2008 Chrysler Aspen Concorde Pacifica car radio installation guide

1. Loosen the trim panel with a lever.

Loosen the trim panel with a lever

Loosen the trim panel with a lever

2. Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car

2-1.Take the panel off the dash and disconnect the wires from the car

2-2

2-2

3. Use a screw driver to remove the four screws.

Use a screw driver to remove the four screws

Use a screw driver to remove the four screws

4. Take out the unit and disconnect the wire harness at the back of the unit.

4-1.Take out the unit and disconnect the wire harness at the back of the unit

4-1.Take out the unit and disconnect the wire harness at the back of the unit

4-2

4-2

5. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit

Check all the accessories for the new Seicane head unit

6. Connect the new Seicane radio to the original wiring harness as the user manual or the wiring diagram shows.

Connect the new Seicane radio to the original wiring harness as the user manual or the wiring diagram shows

Connect the new Seicane radio to the original wiring harness as the user manual or the wiring diagram shows

7. Put the new unit into the dash, turn on the new unit and have a test if the new Seicane stereo is working without problem.

8. Put trim panel back on your new Seicane stereo after the normal test.

After reading this article, do you have a strong will to upgrade your factory car radio? It’s quite simple to replace the car radio by yourself with this installation guide. If you have any questions about the installation, it suggest you to the dealer or professionals ask for help.

However, the most important thing before installation is to find the suitable car radio for your car. If you have the same or similar car as the picture show, I’d like to introduce the 2002-2008 Chrysler Aspen Concorde Pacifica car radio from Seicane to you.

http://www.seicane.com/seicane-s09206-android-radio-dvd-player-navigation-system-for-2002-2008-chrysler-aspen-concorde-pacifica-with-obd2-bluetooth-gps-hd-touch-screen-dvr-rearview-camera-tv-video-canbus-wifi-steering-wheel-control-usb-sd-quad-core-cpu-mirror-link

This great 2002-2008 Chrysler Aspen Concorde Pacifica car radio can plays CD and DVD. With anti-shock and the last position storage feature, you can watch a movie or video in motion. It is compatible with various DVD formats including: DVD/DIVX/MP4/MP3/MP2/VCD etc. Office Tools: You can read and edit office documents inside, such as, WORD/EXCEL/POWERPOINT/PDF/TXT as a tablet, being more practical and convenient. Wish you will like it!

Posted in Uncategorized. Tagged with .

How to easily replace a 1999 2000 2001-2004 Jeep Grand Cherokee head unit with Auto A/V DVD Radio GPS Navigation Bluetooth Music

When you use your factory radio for a long time, you will find it can not meet many of your needs anymore. In this time, it’s the good choice for you to replace the new head unit with a wide range of advanced features in your car. This is the easliy installation guide of 1999 2000 2001-2004 Jeep Grand Cherokee head unit from seicane. If you have the same or similar car, you can take this installation guide to help you during the installation.

1999 2000 2001-2004 Jeep Grand Cherokee after installation

1999 2000 2001-2004 Jeep Grand Cherokee after installation

Here are some tips for you before the installation:

1.Please disconnect the power before the installation.

2.A lever and a screwdriver need to be prepared before the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible, so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

1999 2000 2001-2004 Jeep Grand Cherokee head unit installation steps

1. Remove the trim panel with a lever.

Remove the trim panel with a lever

Remove the trim panel with a lever

2. Remove 4 screws which holds the factory radio in place.

2-1.Remove 4 screws which holds the factory radio in place.

2-1.Remove 4 screws which holds the factory radio in place

2-2

2-2

3. Take out the factory radio and disconnect the wires from the car.

3-1.Take out the factory radio and disconnect the wires from the car

3-1.Take out the factory radio and disconnect the wires from the car

3-2

3-2

4. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

5. Connect the new Seicane radio to the original wiring harness as the user manual or the wiring diagram.

Connect the new Seicane radio to the original wiring harness as the user manual or the wiring diagram

Connect the new Seicane radio to the original wiring harness as the user manual or the wiring diagram

6. Put the new Seicane head unit into the dash.

7. Install four screws and trim panel.

8. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

Wish you can get some help from the above 1999 2000 2001-2004 Jeep Grand Cherokee head unit installation guide. If you have any questions about the installation, it’s suggested you ask your dealer or professionals for help.

Besides, you need to make sure you have a suitable head unit for your car to install it. If you are looking for new one, I’d like to share a link of Jeep Grand Cherokee head unit from seicane and you can take it as reference.

http://www.seicane.com/1999-2000-2001-2004-jeep-grand-cherokee-head-unit-auto-a-v-dvd-radio-gps-navigation-bluetooth-music-tv-tuner-steering-wheel-control-dual-zone-ipod-aux-t6096

This 1999 2000 2001-2004 Jeep Grand Cherokee head unit has 4.3 inch 800*480 2‐DIN WVGA HD Digital TFT LCD touch screen, bringing sharp image and vivid color. It has Built-in worldwide GPS with voice cues, distance information, POIs, road planning all the way. You can get to any of your desired destination with it. The Built‐in Bluetooth, achieving the functionality of wireless communication with your Bluetooth enabled-phone for hands-free phone. Support telemute, call history, phonebook and music streaming. Wish you have a good day!

Posted in Uncategorized. Tagged with .

How to replace a 2002-2006 Dodge Ram pick-up car radio with DVD Player OBD2 Bluetooth Radio GPS Navigation System Mirror link Touch Screen DVR Rearview Camera TV Video USB SD WIFI

Installing a new car stereo in a car is not merely to improve the in-car environment, but also to take the driving experience up a notch, for you can enjoy the greatest convenience in your car as well as have the most fun when you are driving on a long trip. Therefore, more and more car owners want to catch up with such trend and are going to replace their factory radio. If you find you have a dashboard the same as the below picture which is a 2002-2006 Dodge Ram pick-up car radio from Seicane after installation, this article can do some help for you to install a head unit.

2002-2006 Dodge Ram pick-up car radio after installation

2002-2006 Dodge Ram pick-up car radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2002-2006 Dodge Ram pick-up car radio installation steps

1.Remove the trim piece above cup holder with a lever.

Remove the trim piece above cup holder with a lever

Remove the trim piece above cup holder with a lever

2.Remove 2 screws behind the trim piece.

Remove 2 screws behind the trim piece

Remove 2 screws behind the trim piece

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

Gently pry around the side of trim panel with the lever and then remove the trim panel

Gently pry around the side of trim panel with the lever and then remove the trim panel

4.Remove 4 screws which holds the factory radio in place.

Remove 4 screws which holds the factory radio in place

Remove 4 screws which holds the factory radio in place

5.Take out the factory radio.

Take out the factory radio

Take out the factory radio

6.Disconnect the smaller harness on the behind of the factory radio.

Disconnect the smaller harness on the behind of the factory radio

Disconnect the smaller harness on the behind of the factory radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10.Install four screws and trim panel.

11.Install 2 screws behind the trim piece and the trim piece.

12.Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

Is it easy for you to understand all the installation steps for a 2002-2006 Dodge Ram pick-up car radio? If not, it’s suggested you consult  your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this amazing 2002-2006 Dodge Ram pick-up car radio head unit from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:

http://www.seicane.com/seicane-s09201-android-2002-2006-dodge-ram-pick-up-dvd-player-obd2-bluetooth-radio-gps-navigation-system-mirror-link-touch-screen-dvr-rearview-camera-tv-video-usb-sd-wifi-steering-wheel-control

With this Dodge Ram pick-up car radio in your car, you can easily find your way to your destination under the guidance of the current location, landmark display, 3D street view, intelligent route planning, turn-by-turn direction as well as voice prompts. The DVD player can support formats like DVD/DVD-R/DVD±RW/HDCD/CD-R/CD±RW/MP3/MP4, a lot of fun are easily accessible for you in your car.

Posted in Uncategorized. Tagged with .

How to replace a 2002-2007 Dodge Durango car radio with Touch Screen GPS Radio Stereo CD DVD Player IPOD IPhone MP3 AUX Backup Camera Dual Zone Bluetooth Music

First shows you an amazing 2002-2007 Dodge Durango car radio from Seicane after installation. Installing such a car stereo in your car can bring you much convenience as well as enjoyment. Here I’d like to share a step-by-step Dodge Durango car radio installation guide with you. If you can’t finish the installation guide on your own, you can ask a professional for help.

2002-2007 Dodge Durango car radio after installation

2002-2007 Dodge Durango car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2002-2007 Dodge Durango car radio installation steps

1.Loosen the trim panel with a lever.

Loosen the trim panel with a lever

Loosen the trim panel with a lever

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car

2-1.Take the panel off the dash and disconnect the wires from the car

2-2.Take the panel off the dash and disconnect the wires from the car

2-2.Take the panel off the dash and disconnect the wires from the car

3.Remove the four screws which are holding the unit with a screwdriver.

Remove the four screws which are holding the unit with a screwdriver

Remove the four screws which are holding the unit with a screwdriver

4.Take out the unit and disconnect the wire harness at the back of the unit.

4-1.Take out the unit and disconnect the wire harness at the back of the unit

4-1.Take out the unit and disconnect the wire harness at the back of the unit

4-2.Take out the unit and disconnect the wire harness at the back of the unit

4-2.Take out the unit and disconnect the wire harness at the back of the unit

5.Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original car radio ‘s plugs.

7-1. Connect the Seicane car stereo to your original car radio 's plugs

7-1. Connect the Seicane car stereo to your original car radio ‘s plugs

7-2. Connect the Seicane car stereo to your original car radio 's plugs

7-2. Connect the Seicane car stereo to your original car radio ‘s plugs

8.Put the new Seicane car radio into the dash.

9.Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10.Put trim panel back on your new Seicane car radio after the normal test.

Is it easy for you to understand all the installation steps for a 2002-2007 Dodge Durango car radio? If not, it’s suggested you consult  your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this amazing 2002-2007 Dodge Durango car radio from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:

http://www.seicane.com/top-2002-2007-dodge-dakota-p-u-durango-touch-screen-gps-radio-stereo-cd-dvd-player-bluetooth-music-ipod-iphone-mp3-aux-backup-camera-dual-zone-t6015

With 18 FM channels and 12 AM channels to be preset, you can scan for your favorite station to get the real-time traffic situation, entertainment and global news. You can go anywhere with the great GPS navigation system with you on all trips. And you can still use the steering wheel control after installation as well. Wish you like this amazing 2002-2007 Dodge Durango car radio and have a wonderful time with it from now on!

Posted in Uncategorized. Tagged with .

How to replace a 2002-2006 CHRYSLER Sebring Sedan car stereo with OBD2 Bluetooth Touch Screen Mirror link GPS DVR TV Video USB SD WIFI Rearview Camera Quad-core CPU

If you find your factory radio can’t meet your needs in a car any more, it’s wise of you to replace it with a multifunctional aftermarket car stereo with which you can get a lot of convenience and enjoyment in your car all the way. Now I’d like to share a step-by-step 2002-2006 CHRYSLER Sebring Sedan car stereo installation guide from Seicane with you. Wish you can get some help from it.

2002-2006 CHRYSLER Sebring Sedan car stereo after installation

2002-2006 CHRYSLER Sebring Sedan car stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2002-2006 CHRYSLER Sebring Sedan car stereo installation steps

1.Remove the trim piece above cup holder with a lever.

Remove the trim piece above cup holder with a lever

Remove the trim piece above cup holder with a lever

2.Remove 2 screws behind the trim piece.

Remove 2 screws behind the trim piece

Remove 2 screws behind the trim piece

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

Gently pry around the side of trim panel with the lever and then remove the trim panel

Gently pry around the side of trim panel with the lever and then remove the trim panel

4.Remove 4 screws which holds the factory radio in place.

Remove 4 screws which holds the factory radio in place

Remove 4 screws which holds the factory radio in place

5.Take out the factory radio.

Take out the factory radio

Take out the factory radio

6.Disconnect the smaller harness on the behind of the factory radio.

Disconnect the smaller harness on the behind of the factory radio

Disconnect the smaller harness on the behind of the factory radio

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car stereo to your original car radio ‘s plugs.

10.Install four screws and trim panel.

11.Install 2 screws behind the trim piece and the trim piece.

12.Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

After reading this step-by-step installation instruction, can you install this 2002-2006 CHRYSLER Sebring Sedan car stereo in your car? If you find it too hard for you, you’d better turn to a professional for help. Before and during the installation, you can also seek help from your dealer if you encounter any problem. If you don’t find a suitable stereo for your car, you can refer to this modern 2002-2006 CHRYSLER Sebring Sedan car stereo from Seicane, please check out for more details:

http://www.seicane.com/seicane-s09201-aftermarket-android-radio-dvd-player-navigation-system-for-2002-2006-chrysler-sebring-sedan-with-obd2-bluetooth-touch-screen-mirror-link-gps-dvr-tv-video-usb-sd-wifi-rearview-camera-steering-wheel-control

This 2002-2006 CHRYSLER Sebring Sedan car stereo is built in a radio tuner with 18 FM channels and 12 AM channels to be preset, you can scan for different frequencies to listen to your favorite station. A digital TV to play live TV shows can also be connected as an option.And it’s just plug and play. Wish you like this amazing CHRYSLER Sebring Sedan car stereo and have a great time!

Posted in Uncategorized. Tagged with .

9 easy steps to install a 2002-2007 2008 Chrysler Aspen Concorde Pacifica head unit with DVD GPS Sat Nav AM FM Radio TV Tuner Bluetooth IPod Iphone AUX Steering Wheel Control USB SD Dual Zone

A new head unit can not only bring a lot of convenience for car owners but also offer much entertainment at the same time. Therefore, more and more car owners have successfully upgraded their factory radio with a brand new aftermarket unit. If you also have such a plan, it’s wise of you to find the installation steps for it. The following is a professional 2002-2007 2008 Chrysler Aspen Concorde Pacifica head unit installation guide from Seicane for your reference to help with the installation of your new unit.

2002-2007 2008 Chrysler Aspen Concorde Pacifica head unit after installation

2002-2007 2008 Chrysler Aspen Concorde Pacifica head unit after installation

Tips about the installation: 

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2002-2007 2008 Chrysler Aspen Concorde Pacifica head unit installation guide

1.Loosen the trim panel with a lever.

Loosen the trim panel with a lever

Loosen the trim panel with a lever

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car

2-1.Take the panel off the dash and disconnect the wires from the car

2-2.Take the panel off the dash and disconnect the wires from the car

2-2.Take the panel off the dash and disconnect the wires from the car

3.Remove the four screws which are holding the unit with a screwdriver.

Remove the four screws which are holding the unit with a screwdriver

Remove the four screws which are holding the unit with a screwdriver

4.Take out the unit and disconnect the wire harness at the back of the unit.

4-1.Take out the unit and disconnect the wire harness at the back of the unit

4-1.Take out the unit and disconnect the wire harness at the back of the unit

4-2.Take out the unit and disconnect the wire harness at the back of the unit

4-2.Take out the unit and disconnect the wire harness at the back of the unit

5.Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the Seicane head unit to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio 's plugs

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs

6-2. Connect the Seicane car stereo to your original car radio 's plugs

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs

6-3. Connect the Seicane car stereo to your original car radio 's plugs

6-3. Connect the Seicane car stereo to your original car radio ‘s plugs

7.Put the new Seicane head unit into the dash.

8.Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9.Put trim panel back on your new Seicane head unit after the normal test.

Wish the detailed installation above for a 2002-2007 2008 Chrysler Aspen Concorde Pacifica head unit can be helpful you. If you have any question, it’s suggested you turn to your dealer for help. If you don’t have any experience on the installation, you’d better have it installed by a professional. Besides, you need to confirm your new stereo can be suitable for your car. To check the compatibility, you are welcome to click the link below which is about a top 2002-2007 2008 Chrysler Aspen Concorde Pacifica head unit from Seicane.

http://www.seicane.com/2-din-2002-2007-2008-chrysler-aspen-concorde-pacifica-dvd-gps-sat-nav-am-fm-radio-tv-tuner-bluetooth-ipod-iphone-aux-steering-wheel-control-usb-sd-dual-zone-t6015

This all-in-one Chrysler Aspen Concorde Pacifica head unit comes with an appealing interface, and you can adjust the wallpaper and car logo according to your preference. The steering wheel control can still work after installation. Just retrofit your car with this remarkable GPS navigation system DVD player for higher configurations and better performance right now. Good luck to you!

Posted in Uncategorized. Tagged with .

How to upgrade a 2007-2013 TOYOTA Alphard car radio with DVD player Bluetooth Radio Mirror link multi-touch screen OBD DVR TV USB SD 3G WIFI Quad-core CPU 16G Flash

Did you install a new head unit on your own? If not, you may think it too difficult for you to do it by yourself. Actually, more and more car owners have demonstrated they can achieve the installation on their own with the help of detailed installation guide. This passage from Seicane for a 2007-2013 TOYOTA Alphard car radio can be instructive before and during the whole process of the installation.

2007-2013 TOYOTA Alphard car radio after installation

2007-2013 TOYOTA Alphard car radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007-2013 TOYOTA Alphard car radio installation guide

1·Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2·Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4·Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7· If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8·Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane car stereo. Finally the new Seicane car stereo is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane car stereo. Finally the new Seicane car stereo is installed and a comprehensive test should be conducted on the new radio

Under the guidance of this detailed installation guide specially for a 2007-2013 TOYOTA Alphard car radio, can you install your new radio in you car? If not, don’t worry, you can ask a professional for help. If there is any question, you can consult your dealer.

On the other hand, if you don’t have an ideal radio for your car, I’d like to recommend this advanced 2007-2013 TOYOTA Alphard car radio from Seicane to you. Here’s the link, please check out the following link for more details:

http://www.seicane.com/9-inch-android-gps-navigation-system-for-2007-2013-toyota-alphard-with-dvd-player-bluetooth-radio-mirror-link-multi-touch-screen-obd-dvr-rearview-camera-tv-usb-sd-3g-wifi-s169005

This powerful 2007-2013 TOYOTA Alphard car radio with the latest Android system is an ideal replacement for you to upgrade factory radio with better performance. It is compatible with a number of OSD languages, such as Chinese, English, French, German, Russian, Portuguese, Arabic, Thai language, Spanish, Italian, making it possible to be used widely all over the world. To have a better driving experience, this wonderful car radio is just your best choice!

Posted in Uncategorized. Tagged with .

Specific installation steps for a 2008-2015 Mazda 6 Ruiyi car stereo with Bluetooth Mirror link HD touch screen OBD DVR TV USB SD 3G WIFI Rearview camera IPOD

Now more and more car owners would like to have a more comfortable in-car environment, so they try many ways to upgrade the capabilities of their car. One of the most popular ways is to replace the factory radio with a new aftermarket head unit which can support many features. Now to install a new unit, you can find a detailed installation guide for help. The below is a step-by-step 2008-2015 Mazda 6 Ruiyi car stereo installation guide from Seicane, you can read it carefully to help with the installation.

2008-2015 Mazda 6 Ruiyi car stereo after installation

2008-2015 Mazda 6 Ruiyi car stereo after installation

Safety notes

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

2008-2015 Mazda 6 Ruiyi car stereo installation guide

1. Remove your cup holder.

Remove your cup holder

Remove your cup holder

2. Unscrew and remove the shift knob.

Unscrew and remove the shift knob

Unscrew and remove the shift knob

3. Remove the shift trim panel with your fingers.

Remove the shift trim panel with your fingers

Remove the shift trim panel with your fingers

4. Then remove both sides trim panel of the speed control.

Then remove both sides trim panel of the speed control

Then remove both sides trim panel of the speed control

5. Pull out the panel and set it aside.

Pull out the panel and set it aside

Pull out the panel and set it aside

6. Remove four screws on each side of the speed control with a Phillips-screwdriver.

Remove four screws on each side of the speed control with a Phillips-screwdriver

Remove four screws on each side of the speed control with a Phillips-screwdriver

7.Pull out the speed control slowly.

Pull out the speed control slowly

Pull out the speed control slowly

8. Find two screws under the radio and remove them.

Find two screws under the radio and remove them

Find two screws under the radio and remove them

9. Push the top panel and set it aside.

Push the top panel and set it aside

Push the top panel and set it aside

10. Remove two screws with a Phillips-screwdriver as the picture shows.

Remove two screws with a Phillips-screwdriver as the picture shows

Remove two screws with a Phillips-screwdriver as the picture shows

11. Pull out the factory radio slowly.

Pull out the factory radio slowly

Pull out the factory radio slowly

12. Disconnect the original harness and set the factory radio aside.

Disconnect the original harness and set the factory radio aside

Disconnect the original harness and set the factory radio aside

13. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

14. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

15. Connect the Seicane car stereo to your original car radio ‘s plugs.

16. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car stereo into the dash.

18. Put everything into their original place. All the installation is done.

Wish the 2008-2015 Mazda 6 Ruiyi car stereo installation above can be helpful you. If you have any question, it’s suggested you turn to your dealer for help. If you don’t have any experience on the installation, you’d better have it installed by a professional. Besides, you need to confirm your new stereo can be suitable for your car. To check the compatibility, you are welcome to click the link below which is about a top 2008-2015 Mazda 6 Ruiyi car stereo from Seicane.

http://www.seicane.com/android-in-dash-car-dvd-player-radio-gps-navigation-system-for-2008-2015-mazda-6-ruiyi-with-bluetooth-mirror-link-hd-touch-screen-obd-dvr-tv-usb-sd-3g-wifi-rearview-camera-ipod-s168001

This popular DVD player GPS navigation system can be well combined with 2008-2015 Mazda 6 Ruiyi with a great Android system. Now you can enjoy a simple operation and a crystal clear display on the large 8-inch large 1024*600 multi-touch screen. You can easily pair your Bluetooth-enabled mobile phone with this unit to make and receive hands-free calls to keep safe and stream music to relax on all trips. Why not take this Mazda 6 Ruiyi car stereo right now and have a great time from now on?

Posted in Uncategorized. Tagged with .

How to replace a 2005-2009 Skoda SUPERB head unit with DVD player Quad-core CPU Mirror link Capacitive multi-touch screen OBD DVR TV Bluetooth Rear view camera IPOD 16G Flash

Nowadays, it won’t cost a car owner a lot to upgrade the factory radio with a brand new aftermarket head unit for higher configurations and advanced features, so more and more car owners would probably choose an ideal car stereo to replace the factory radio. To help you install a new aftermarket car stereo, now I’d like to share a detailed 2005-2009 Skoda SUPERB head unit installation guide from Seicane with you. Wish it can be helpful for you.

2005-2009 Skoda SUPERB head unit after installation

2005-2009 Skoda SUPERB head unit after installation

Please notice before the installation:    

1.Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2.A lever and a screwdriver need to be prepared before the installation.

3.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005-2009 Skoda SUPERB head unit installation guide

1. Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane head unit.

13. Connect the harnesses to the back of the new Seicane head unit.

14. Connect the Seicane head unit to your original car radio ‘s plugs.

15. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16.Put the new Seicane head unit into the dash.

17. Put everything into their original place.

The step-by-step installation guide for a 2005-2009 Skoda SUPERB head unit is shown as the above. Wish you can get some help from it. If there is any question, you can consult your dealer. However, if you can’t finish it on your own, you’d better ask a professional for help. If you are still looking for an ideal car stereo for your car, you can refer to this excellent 2005-2009 Skoda SUPERB head unit from Seicane. Please click for more details:

http://www.seicane.com/8-inch-3g-wifi-android-radio-navigation-system-for-2005-2009-skoda-superb-with-dvd-player-mirror-link-capacitive-multi-touch-screen-obd-dvr-tv-bluetooth-rear-view-camera-ipod-s168032

This top 2005-2009 Skoda SUPERB head unit is of great utility and extendibility for you to upgrade your factory radio. Its 8 inch 1024*600 multi-touch screen can provide crystal clear display as well as facilitate the operation. To enjoy more modern features, just take it and go right now!

Posted in Uncategorized. Tagged with .

A detailed installation guide for a 2010 Ford Tourneo Connect car stereo with Bluetooth Music HD touch screen OBD DVR USB SD Rear view camera TV 3G WIFI IPOD Mirror link

Because most of the factory radios just come with single function, which can’t meet all the needs of most car owners. If you are one of them, it’s great for you to replace it with a new aftermarket car radio. Now I’d like to share a step-by-step 2010 Ford Tourneo Connect car stereo installation guide from Seicane for your reference.

2010 Ford Tourneo Connect car stereo after installation

2010 Ford Tourneo Connect car stereo after installation

Safety notes

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2010 Ford Tourneo Connect car stereo installation guide

1. Remove the panel with a lever.

Remove the panel with a lever

Remove the panel with a lever

2. Unscrew four screws holding the original radio with a screwdriver.

Unscrew four screws holding the original radio with a screwdriver

Unscrew four screws holding the original radio with a screwdriver

3. Gently take the original car radio out of the dashboard.

Gently take the original car radio out of the dashboard

Gently take the original car radio out of the dashboard

4. Disconnect all connectors at the back of the original car radio.

5. Check all the accessories for the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the Seicane car radio to your original car radio 's plugs

Connect the Seicane car radio to your original car radio ‘s plugs

7. Connect the Seicane car radio to your original car radio ‘s plugs.

8. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane radio into the dash.

10. Put everything into their original place.

 

Under the guidance of this detailed installation guide specially for a 2010 Ford Tourneo Connect car stereo, now can you install your new radio in you car ? If not, don’t worry, you can ask a professional for help. If there is any question, you can consult your dealer.

But if you don’t have an ideal radio for your car, I’d like to recommend this advanced 2010 Ford Tourneo Connect car stereo from Seicane to you. Here’s the link, please check out the following link for more details:

http://www.seicane.com/aftermarket-android-autoradio-gps-dvd-player-navigation-system-for-2010-ford-tourneo-connect-with-bluetooth-music-hd-touch-screen-obd-dvr-usb-sd-rear-view-camera-tv-3g-wifi-ipod-mirror-link-s167017


This multifunctional 2010 Ford Tourneo Connect car stereo comes with a great DVD player for you to play videos in formats like DVD/DVD-R/DVD±RW/HDCD/CD-R/CD±RW/MP3/MP4/Picture CD/VCD/WMA, etc. The radio tuner is preset with 18 FM and 12 AM channels, you can easily scan for different frequencies to listen to your favorite station. Why not take it and have a wonderful time with it right now?

Posted in Uncategorized. Tagged with .