http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Monthly Archives: May 2016

How to install a Suzuki Jimny car radio with GPS Radio TV Bluetooth DVD player with easy 9 steps

Some car owners who want to keep both themselves and their passengers entertained all the way now can easily replace the factory radio with a multifunctional head unit to add a huge ton of fun in the car. Whether you find an ideal head unit for your car or not, you can take this professional Suzuki Jimny car radio installation instruction from Seicane as a reference. Wish it can be helpful for you.

Suzuki Jimny car radio after installation

Suzuki Jimny car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

Suzuki Jimny car radio installation instruction

1.The original car radio.

The original car radio

The original car radio

2.Remove all clips from the dashboard. The best way to do that is pulling them to the rear of the panel. To reassemble the dash cover the clips must be placed in the cover, not in the dashboard holes.

Remove all clips from the dashboard

Remove all clips from the dashboard

3.Unscrew the radio and disconnect ALL cables.

Unscrew the radio and disconnect ALL cables

Unscrew the radio and disconnect ALL cables

4.Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

5.Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

6.Connect the Seicane car radio to your original car radio ‘s plugs.

7.Put the new Seicane radio into the dash.

8.Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9.Put everything into their original place.

All the detailed installation guide for the Suzuki Jimny car radio is shown the above. Wish it can be helpful for you. If you encounter any question, you can consult your dealer. Please make sure you are clear about every step before you start to install your new radio.

Besides, if you haven’t found an ideal car radio for your car, I’d like to recommend a wonderful Suzuki Jimny car radio from Seicane to you. It comes with an exquisite interface and high configurations for you to upgrade your factory radio. For more details, please click:

http://www.seicane.com/car-dvd-player-for-suzuki-jimny-with-gps-radio-tv-bluetooth-srd-8715

This modern Suzuki Jimny car radio can function as an amazing DVD multimedia player for you to play your favorite videos in your car. By simply connecting with your enabled mobile phone, you can have hands-free calls and stream audio to keep safe and relaxed on the journey. Just navigate to a wide range of locations with this fantastic Suzuki Jimny car radio for great fun on the way!

Posted in Uncategorized.

A detailed installation guide for a 2007 2008 2009 Mercury Mountaine head unit with touch screen 16G Flash 3G WiFi Bluetooth Mirror Link DVD player

It has become a trend for car owners to replace the factory radio with an aftermarket head unit which can offer the 3D GPS navigation as well as entertainment enjoyment at the same time while driving. Some of you may think it too hard to install a new head unit. Actually, it’s not too difficult if you have the correct installation instruction. If you own a 2007 2008 2009 Mercury Mountaine and want to upgrade your radio, you can read this 2007 2008 2009 Mercury Mountaine head unit installation instruction from Seicane carefully.

2007 2008 2009 Mercury Mountaine head unit after installation

2007 2008 2009 Mercury Mountaine head unit after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007 2008 2009 Mercury Mountaine head unit installation guide

Step 1: Remove the trim around gear shifter.

Remove the trim around gear shifter

Remove the trim around gear shifter

Step 2: Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver

Remove screws securing center console lid with a screwdriver

Step 3: Remove the center console trim.

Remove the center console trim

Remove the center console trim

Step 4: Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides

Remove console side panels on both driver and passenger sides

Step 5: Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls

Remove bolts securing radio bezel and AC controls

Step 6: Unplug AC controls (from passenger side).

Unplug AC controls (from passenger side)

Unplug AC controls (from passenger side)

Step 7: Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls

Remove the radio bezel and AC controls

Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Step 9: Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

Step 10: Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

Step 11: Connect the Seicane head unit to your original car radio ‘s plugs, and put the new Seicane head unit into the dash.

Step 12: Turn on the new Seicane head unit and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

Wish the above installation instruction for the 2007 2008 2009 Mercury Mountaine head unit can be helpful for you. If there is any question, you can seek help from your dealer. If it’s the first time for you to install a new unit, you’d better ask a professional for help. Please make sure you have a comprehensive understanding before you start to install your new head unit.

Do you find a suitable head unit which can fit your car without any gap? If not, I’d like to recommend a wonderful 2007 2008 2009 Mercury Mountaine head unit from Seicane to you. It comes with the humanizing operation interface for you to upgrade your factory radio. For more details, you are welcome to click:

http://www.seicane.com/seicane-s127302-quad-core-pure-android-dvd-gps-in-dash-radio-system-for-2005-2009-ford-mustang-with-16g-flash-3g-wifi-bluetooth-mirror-link-obd2-rearview-camera

This multifunctional Mercury Mountaine head unit is the ideal replacement for you to upgrade your factory radio in your car. To easily reach your destination, you can turn on the GPS navigation system for text-to-speech guidance and voice prompts. The bluetooth technology to support hands-free calls and music streaming is included for you. Your steering wheel control can still work after installation. Wish you like it and have amazing fun with it. Good luck!

Posted in Uncategorized.

A step-by-step installation guide for a 2007-2013 GMC Acadia car stereo with Mirror Link OBD2 3G WiFi 1024*600 Multi-touch Capacitive Screen

If you want to upgrade your car capabilities, the easiest and most effective way is to replace your factory radio. To get the most up-to date features, you just need to remove your factory radio and install a new head unit. To install a new head unit, you can find a correct installation guide to help you. The following is a step-by-step installation guide about a 2007-2013 GMC Acadia car stereo from Seicane. If you also have the same dashboard, you can take this installation guide as a reference.

2007-2013 GMC Acadia car stereo after installation

2007-2013 GMC Acadia car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007-2013 GMC Acadia car stereo installation guide

1.Remove the trim panel by prying the edges with a lever.

Remove the trim panel by prying the edges with a lever

Remove the trim panel by prying the edges with a lever

2.Remove two screws securing the small panel under the factory radio with a screwdriver.

Remove two screws securing the small panel under the factory radio with a screwdriver

Remove two screws securing the small panel under the factory radio with a screwdriver

3.Remove the small panel with your hands.

Remove the small panel with your hands

Remove the small panel with your hands

4.Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

4-1. Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

4-1. Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

4-2. Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

4-2. Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

5.Unscrew four screws holding the factory radio with a screwdriver.

Unscrew four screws holding the factory radio with a screwdriver

Unscrew four screws holding the factory radio with a screwdriver

6.Take the original radio out of the dashboard with your hands.

Take the original radio out of the dashboard with your hands

Take the original radio out of the dashboard with your hands

7.Disconnect the connectors at the back of the factory radio.

Disconnect the connectors at the back of the factory radio

Disconnect the connectors at the back of the factory radio

8.Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

9.Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

10.Connect the Seicane car stereo to your original car radio ‘s plugs.

11.Put the new Seicane car stereo into the dash.

12.Turn on the new Seicane car stereo and check whether the radio is working properly.

13.Firm all screws and the panels into their original place.

 

With the help of this detailed installation guide, can you install the new 2007-2013 GMC Acadia car stereo on your own? If not, you’ d better ask a professional to help you. You may encounter some questions during the whole process of the installation, then you can consult your dealer. In addition, it’s essential for you to make sure your new car stereo can fit your car. If you have no idea about this, you can take the following intelligent 2007-2013 GMC Acadia car stereo as a reference, please click for more details:

http://www.seicane.com/oem-2007-2013-gmc-yukon-tahoe-acadia-chevy-chevrolet-tahoe-suburban-buick-enclave-android-4-4-4-radio-removal-with-autoradio-gps-navigation-car-a-v-system-1024-600-multi-touch-capacitive-screen-mirror-link-obd2-3g-wifi-k7012

This high-end GMC Acadia car stereo can work well with GMC Acadia from 2007 to 2013 at present. The 1080P large 7 inch touch screen can provide a clearer viewing for you to enjoy all kinds of videos in your car. To get to your desired destination, you can put the latest GPS navigation system into good use for the most accurate direction and voice prompts. To keep safer and more pleasant on the way, you can wirelessly connect with your enabled mobile phone via the bluetooth connection for hands-free calls and music streaming.

To upgrade your factory radio, this multifunctional GMC Acadia car stereo is just your best choice. Just have a great time with it! Good luck!

Posted in Uncategorized.

Simply install a 2007-2010 Ford Expedition head unit with easy 13 steps

Here shows you an attractive 2007-2010 Ford Expedition head unit from Seicane after installation. With a wide range of features to be supported by such a multifunctional head unit, you can enjoy more convenience and enjoyment in your car. To install it in your car, you can find a detailed installation guide to help you. If you own a 2007-2010 Ford Expedition and have the same dashboard as the picture below, you can read carefully this passage about the Ford Expedition head unit installation instruction.

2007-2010 Ford Expedition head unit after installation

2007-2010 Ford Expedition head unit after installation

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2007-2010 Ford Expedition head unit installation guide

Step 1: Remove the trim around gear shifter.

Remove the trim around gear shifter

Remove the trim around gear shifter

Step 2: Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver

Remove screws securing center console lid with a screwdriver

Step 3: Remove the center console trim.

Remove the center console trim

Remove the center console trim

Step 4: Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides

Remove console side panels on both driver and passenger sides

Step 5: Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls

Remove bolts securing radio bezel and AC controls

Step 6: Unplug AC controls (from passenger side).

Unplug AC controls (from passenger side)

Unplug AC controls (from passenger side)

Step 7: Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls

Remove the radio bezel and AC controls

Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Step 9: Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

Step 10: Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

 

Step 11: Connect the Seicane head unit to your original car radio ‘s plugs, and put the new Seicane head unit into the dash.

Step 12: Turn on the new Seicane head unit and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

 

All the installation guide for a 2007-2010 Ford Expedition head unit is shown as the above. Wish it can be helpful for you. If you have any question, you can consult your dealer. If you find it too hard for you to install it, you’d better ask a professional for help.

To have a pleasant car radio upgrade experience, you need to make sure your new unit can be suitable for your car. Here comes a great 2007-2010 Ford Expedition head unit from Seicane for you to take a reference, please click for more details:

http://www.seicane.com/seicane-s127302-quad-core-pure-android-dvd-gps-in-dash-radio-system-for-2005-2009-ford-mustang-with-16g-flash-3g-wifi-bluetooth-mirror-link-obd2-rearview-camera

Built with a large 7 inch touch screen in this top Ford Expedition head unit, you can pleasantly enjoy your favorite videos in your car whenever and wherever you are. To find your way to your destination with ease, you can count on the powerful GPS navigation system for turn-by-turn direction and voice prompts.

Your smart phone can also be connected with this unit via the bluetooth technology, so that you can directly search for the contact list on the screen and dial and receive hands-free calls to keep safe. Besides, the bluetooth technology enables you to pair with other compatible devices to stream your favorite music to relax during the whole driving.

To keep relaxed all the way, this amazing Ford Expedition head unit is just your best choice. Good luck to you!

Posted in Uncategorized. Tagged with .

Upgrade a 2002 2003 2004 2005 Chrysler 300-M head unit with easy 9 steps

Many car owners want to upgrade their factory radio with a new aftermarket car stereo to enjoy more convenience and enjoyment on the way, but some of them worry the installation is too hard and troublesome. As a matter of fact, the installation is mostly quite simple. If you are a green hand on it, you can ask a professional for help. Here I’ d like to introduce a detailed 2002 2003 2004 2005 Chrysler 300-M head unit installation guide from Seicane to you. Wish it can be helpful for you.

2002 2003 2004 2005 Chrysler 300-M head unit  after installation

2002 2003 2004 2005 Chrysler 300-M head unit after installation

 

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2002 2003 2004 2005 Chrysler 300-M head unit installation guide

 

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

1.Loosen the trim panel with a lever

 

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

 

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

 

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

 

5.Check all the accessories for the new Seicane unit.

5.Check all the accessories for the new Seicane car radio.

5.Check all the accessories for the new Seicane car radio.

 

6.Connect the Seicane stereo to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio 's plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio 's plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-3. Connect the Seicane car stereo to your original car radio 's plugs.

6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.

 

7.Put the new Seicane unit into the dash.

7.Put the new Seicane stereo into the dash.

7.Put the new Seicane stereo into the dash.

 

 

8.Turn on the new unit and have a test if the new Seicane unit is working without problem..

9.Put trim panel back on your new Seicane unit after the normal test.

 

Wish the above installation guide for a 2002 2003 2004 2005 Chrysler 300-M head unit can be helpful for you. If you find the above dashboard is different from yours, please don’t worry, you can still refer to it, because the installation is similar on the whole. If you are still looking for an ideal unit for your car, I’d like to recommend this excellent 2002 2003 2004 2005 Chrysler 300-M head unit from Seicane to you, please click for more details:

 

http://www.seicane.com/2002-2005-2006-2007-chrysler-300-limited-touring-300c-300m-gps-radio-bluetooth-dvd-player-navigation-multimedia-audio-system-tv-aux-ipod-iphone-backup-camera-steering-wheel-control-t6015

 

This modern Chrysler 300-M head unit comes with built-in wifi, you can freely surf the internet for online resources and thousands of apps with this fantastic car stereo specially for 2011 2012 2013 Suzuki Swift. You can get the hands-free calling convenience and music streaming enjoyment via the bluetooth connection with your enabled mobile phone. Thanks to the latest GPS navigation system, you can go anywhere without getting lost any more under the guidance of turn-by-turn direction and voice prompts.

 

Just take this amazing Chrysler 300-M head unit on all your trips and have a wonderful time with it. Good luck to you!

Posted in Chrysler. Tagged with .

9 simple steps to install a 2002 2003-2008 Dodge Viper head unit with DVD GPS System 3D Navigation Radio RDS TV Tuner IPod USB SD MP3

Are you a music lover or a radio enthusiast? If yes, then a multifunctional car stereo which can support many features must be popular with you. It can not only refresh you with its various entertainment options but also lead you to your desired destination with the most accurate direction. To install a new stereo in your car, this professional 2002 2003-2008 Dodge Viper head unit installation instruction from Seicane can be much helpful for you.

2002 2003-2008 Dodge Viper head unit after installation

2002 2003-2008 Dodge Viper head unit after installation

 

 

Precautions:

  1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
  2. A lever and a screwdriver need to be prepared before the installation.
  3. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2002 2003-2008 Dodge Viper head unit installation guide

 

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

1.Loosen the trim panel with a lever

 

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

 

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

 

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

 

5.Check all the accessories for the new Seicane unit.

5.Check all the accessories for the new Seicane car radio.

5.Check all the accessories for the new Seicane car radio.

 

6.Connect the Seicane unit to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio 's plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio 's plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-3. Connect the Seicane car stereo to your original car radio 's plugs.

6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.

 

7.Put the new Seicane unit into the dash.

7.Put the new Seicane stereo into the dash.

7.Put the new Seicane stereo into the dash.

 

8.Turn on the new radio and have a test if the new Seicane unit is working without problem..

9.Put trim panel back on your new Seicane unit after the normal test.

 

All in all, if you find the dashboard above is different from yours, you don’t have to worry about that, because the installation is similar on the whole, and it won’t have much influence on the installation. If you encounter any question during the whole process, you are welcome to seek help from your dealer.

 

On the other hand, do you find an ideal unit for your car? If not, you can refer to this intelligent 2002 2003-2008 Dodge Viper head unit from Seicane, which can be compatible with a wide range of features to upgrade your factor y radio, please click for more details:

 

http://www.seicane.com/hd-touch-screen-2002-2008-dodge-stratus-viper-in-dash-dvd-gps-system-3d-navigation-radio-rds-tv-tuner-ipod-usb-sd-mp3-rearview-camera-dual-zone-aux-t6015

 

This advanced Dodge Viper head unit is loaded with a real-time 3D GPS navigation system to provide the lane assist, route planning, 3D street view, landmark display and text-to-speech guidance for you to get to your destination with east. The availability of bluetooth to link with your enabled mobile phone is desirable to have hands-free calls and stream music. Besides, you can connect a rearview camera to this unit to get assistance for easier parking.

 

Just easily find your way to a wide range of locations with this powerful Dodge Viper head unit from now on! Good luck to you!

Posted in Dodge. Tagged with .

A detailed installation guide for a 2006 2007 Dodge Charger radio with GPS Bluetooth Navigation DVD Player MP3 IPod USB SD AUX

Have you ever installed a head unit in your car by yourself? If not, you may worry about the installation if you want to upgrade your factory radio with a new aftermarket unit. Actually, the installation is not too hard. A detailed installation guide can help you a lot. If you own a 2006 2007 Dodge Charger, then you can refer to the following professional installation instruction from Seicane specially for 2006 2007 Dodge Charger radio. Wish it can be helpful for you.

2006 2007 Dodge Charger radio after installation

2006 2007 Dodge Charger radio after installation

 

 

Precautions:

  1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
  2. A lever and a screwdriver need to be prepared before the installation.
  3. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2006 2007 Dodge Charger radio installation guide

 

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

1.Loosen the trim panel with a lever

 

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

 

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

 

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

 

5.Check all the accessories for the new Seicane radio.

5.Check all the accessories for the new Seicane car radio.

5.Check all the accessories for the new Seicane car radio.

 

6.Connect the Seicane radio to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio 's plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio 's plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-3. Connect the Seicane car stereo to your original car radio 's plugs.

6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.

 

7.Put the new Seicane radio into the dash.

7.Put the new Seicane stereo into the dash.

7.Put the new Seicane stereo into the dash.

 

8.Turn on the new radio and have a test if the new Seicane radio is working without problem..

9.Put trim panel back on your new Seicane radio after the normal test.

 

 

That’s all the installation guide for a 2006 2007 Dodge Charger radio. Please make clear you have a full understanding of all the steps before you start to install it. If you have any question, you can consult your dealer or ask a professional for help.

 

In addition, if you don’t find a right radio for your car, I’d like to recommend an ideal 2006 2007 Dodge Charger radio from Seicane to you. Here’s the link, please click for more details:

 

http://www.seicane.com/cheap-2002-2007-dodge-caravan-charger-aftermarket-radio-gps-bluetooth-navigation-dvd-player-touch-screen-mp3-ipod-usb-sd-aux-steering-wheel-control-t6015

 

With this intelligent Dodge Charger radio in your car, you can freely surf the internet in your car thanks to the wifi and 3g internet. The latest GPS navigation system of high accuracy makes you easier to get to your desired destination. You can have a lifetime update for the traffic information to avoid incorrect information. To keep safer and more enjoyable during the whole driving, you can simply pair with your enabled mobile phone for hands-free calls and streaming music via the bluetooth technology.

 

To take your driving experience to next level, this amazing Dodge Charger radio is just your best choice! Good luck to you!

 

Posted in Dodge. Tagged with .

How to upgrade a 2007 Jeep Patriot head unit with Bluetooth Music TV IPOD IPhone USB SD MP3 AUX Rearview Camera

Now please look at the following picture, it looks quiet pretty, doesn’t it? It’s a picture taken after a new Seicane 2007 Jeep Patriot head unit is installed in a car. You may worry that it’ s too hard to install it in your car, so some of you may choose to go to a head unit upgrade center to have it installed, some may ask a professional for help. No matter which way you choose, the installation instruction can be much helpful for you. The following is a professional Jeep Patriot head unit installation instruction from Seicane, you can refer to it for the installation of your new head unit.

2007 Jeep Patriot head unit after installation

2007 Jeep Patriot head unit after installation

 

Tips about the installation:

 

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2007 Jeep Patriot head unit installation guide

 

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

1.Loosen the trim panel with a lever

 

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

 

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

 

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

 

5.Check all the accessories for the new Seicane unit.

5.Check all the accessories for the new Seicane car radio.

5.Check all the accessories for the new Seicane car radio.

 

6.Connect the Seicane unit to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio 's plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio 's plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-3. Connect the Seicane car stereo to your original car radio 's plugs.

6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.

 

7.Put the new Seicane unit into the dash.

7.Put the new Seicane stereo into the dash.

7.Put the new Seicane stereo into the dash.

 

8.Turn on the new radio and have a test if the new Seicane unit is working without problem..

9.Put trim panel back on your new Seicane unit after the normal test.

 

All the installation instruction about a 2007 Jeep Patriot head unit is shown on the above. If you have any question during the whole process, you can consult your dealer. If you are a green hand on the installation, you’ d better ask a professional for help.

 

In order to have a successful upgrade, it’s necessary for you to check the compatibility of your new unit. If you have no idea about this, you can refer to this amazing 2007 Jeep Patriot head unit from Seicane, please click for more details:

 

http://www.seicane.com/aftermarket-radio-gps-dvd-player-for-2002-2007-jeep-grand-cherokee-liberty-patriot-wrangler-with-bluetooth-music-tv-ipod-iphone-usb-sd-mp3-aux-rearview-camera-t6015

 

This 2007 Jeep Patriot head unit comes with a large 5 inch multi-touch screen for you to have an easier operation and a clearer viewing. To find your way to any location with ease, you can utilize the 3D GPS navigation system of high precision to get turn-by-turn direction, route planning and spoken guidance. It also features the bluetooth technology for you to sync with your enabled mobile phone to make and receive hands-free calls and stream music.

 

To have an extraordinary driving experience, this popular 2007 Jeep Patriot head unit is just your best choice. Why not take it right now and have a wonderful time with it?

Posted in Jeep car DVD. Tagged with .

How to upgrade a 2001 2002 2003 Chrysler Grand Voyager car stereo with  CD DVD Player Bluetooth Music TV USB SD AUX Rearview Camera

Some car owners may desire more features than that the factory radio bring for them. In that case, it’s wise of them to replace the factory radio with a new aftermarket car stereo. If you also have such a plan, it’s advised that you find an installation guide to help with the installation. Now I’ d like to share the professional 2001 2002 2003 Chrysler Grand Voyager car stereo installation instruction from Seicane with you. If you own a Chrysler Grand Voyager, then you can take it as a reference.

2001 2002 2003 Chrysler Grand Voyager car stereo after installation

2001 2002 2003 Chrysler Grand Voyager car stereo after installation

 

 

Some tips before the installation:

  1. Please disconnect the power before the installation.
  2. Please prepare a lever and a screwdriver before the removal and the installation.
  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
  4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2001 2002 2003 Chrysler Grand Voyager car stereo installation guide

 

1.Remove the trim piece above cup holder with a lever.

1.Remove the trim piece above cup holder with a lever.

1.Remove the trim piece above cup holder with a lever.

 

2.Remove 2 screws behind the trim piece.

2.Remove 2 screws behind the trim piece.

2.Remove 2 screws behind the trim piece.

 

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

 

4.Remove 4 screws which holds the factory radio in place.

4.Remove 4 screws which holds the factory radio in place.

4.Remove 4 screws which holds the factory radio in place.

 

5.Take out the factory radio.

5.Take out the factory radio.

5.Take out the factory radio.

 

6.Disconnect the smaller harness on the behind of the factory radio.

6.Disconnect the smaller harness on the behind of the factory radio.

6-1.Disconnect the smaller harness on the behind of the factory radio.

6-2. Check all the accessories for the new Seicane car radio.

6-2. Check all the accessories for the new Seicane car radio.

 

7.Connect the Seicane stereo to your original car radio ‘s plugs.

7. Connect the Seicane car radio to your original car radio 's plugs.

7. Connect the Seicane car radio to your original car radio ‘s plugs.

 

8.Connect the smaller harness at the back of the new Seicane stereo.

9.Put the new Seicane stereo back into the dash.

10.Install four screws and trim panel.

11.Install 2 screws behind the trim piece and the trim piece.

12.Turn on the new radio and have a comprehensive test.

13.Tidy up everything in your car, and all the installation is done.

 

Can you understand all the steps for the installation of the 2001 2002 2003 Chrysler Grand Voyager car stereo? If not, you can seek help from your dealer. If you are a total green hand on the installation of a new stereo, you’d better ask a professional to help you.

 

Before the installation, it’s necessary for you to make sure you have a fitting stereo for your car. If you have no idea about it, I’d like to introduce a great 2001 2002 2003 Chrysler Grand Voyager car stereo from Seicane to you, you can take it as a reference, please click for more details:

 

http://www.seicane.com/2001-2002-2003-2004-2007-chrysler-300m-pt-cruiser-sebring-concorde-grand-voyager-town-country-autoradio-navigation-stereo-cd-dvd-player-bluetooth-music-tv-usb-sd-aux-rearview-camera-ipod-mp3-dual-zone-t6096

 

This OEM Chrysler Grand Voyager car stereo is designed with the same shape and dimension as the original radio, now you can install it in your car to upgrade the radio capabilities in your car. The built-in GPS navigation system of high accuracy can lead you to a lot of locations with its turn-by-turn direction and voice prompts. You can also utilize its bluetooth technology to make and receive hands-free calls and stream music to keep safe and enjoyable on all trips.

Posted in Chrysler. Tagged with .

Simple 13 steps to replace a 2002 2003 Dodge Durango head unit with Bluetooth IPOD DVD player Dual Zone

To install a new car stereo in your car, you don’t have to be professionals. With some related experience and the instruction to guide you, you can easily succeed in installing a new stereo as well. The following is a detailed 2002 2003 Dodge Durango head unit installation instruction from Seicane for your reference. Please look at the image below, it’s an amazing Seicane Dodge Durango head unit after installation from Seicane. if you also have the same dashboard, then it’s helpful for you.

2002 2003 Dodge Durango head unit after installation

2002 2003 Dodge Durango head unit after installation

 

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

 

2002 2003 Dodge Durango head unit installation guide

 

1.Remove the trim piece above cup holder with a lever.

1.Remove the trim piece above cup holder with a lever.

1.Remove the trim piece above cup holder with a lever.

 

2.Remove 2 screws behind the trim piece.

2.Remove 2 screws behind the trim piece.

2.Remove 2 screws behind the trim piece.

 

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

 

4.Remove 4 screws which holds the factory radio in place.

4.Remove 4 screws which holds the factory radio in place.

4.Remove 4 screws which holds the factory radio in place.

 

5.Take out the factory radio.

5.Take out the factory radio.

5.Take out the factory radio.

 

6.Disconnect the smaller harness on the behind of the factory radio.

6.Disconnect the smaller harness on the behind of the factory radio.

6-1.Disconnect the smaller harness on the behind of the factory radio.

6-2. Check all the accessories for the new Seicane car radio.

6-2. Check all the accessories for the new Seicane car radio.

 

7.Connect the Seicane unit to your original car radio ‘s plugs.

7. Connect the Seicane car radio to your original car radio 's plugs.

7. Connect the Seicane car radio to your original car radio ‘s plugs.

 

8.Connect the smaller harness at the back of the new radio.

9.Put the new Seicane unit back into the dash.

10.Install four screws and trim panel.

11.Install 2 screws behind the trim piece and the trim piece.

12.Turn on the new radio and have a comprehensive test.

13.Tidy up everything in your car, and all the installation is done.

 

 

Can you understand all the steps for the installation of a 2002 2003 Dodge Durango head unit? If not, you can consult your dealer. If you don’t have any experience on the installation, you’d better ask a professional for help. In addition, you need to check if your new unit can fit your car before the installation. If you have no idea, you can refer to this intelligent 2002 2003 Dodge Durango head unit from Seicane, please click for more details:

 

http://www.seicane.com/2002-2003-2004-2007-dodge-dakota-durango-intrepid-lcd-touch-screen-sat-nav-car-stereo-removal-dvd-tv-radio-rds-bluetooth-ipod-iphone-dual-zone-aux-steering-wheel-control-t6096

 

This intelligent Dodge Durango head unit comes with an accurate GPS navigation system, so you can easily get access to lane assist, 3D street view, landmark display, intelligent route planning, turn-by-turn direction and voice prompts for easily getting to your desired destination. Besides, bluetooth technology, DVD player, FM/AM radio, Ipod, wifi, USB and SD connection, etc. are all available for you as well .

 

Just upgrade your factory radio with this powerful Dodge Durango head unit in your car. Wish you have a wonderful time with it on all your trips.

Posted in Dodge. Tagged with .