http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Monthly Archives: April 2015

How to install 2010-2014 Chevrolet Orlando navigation system support E-Book Bluetooth DVD

New unit after upgrade,navigation dvd with touch screen bluetooth function of 2010-2014 Chevrolet Orlando.

New unit after upgrade,navigation dvd with touch screen bluetooth function of 2010-2014 Chevrolet Orlando

New unit after upgrade,navigation dvd with touch screen bluetooth function of 2010-2014 Chevrolet Orlando

Before we talk about the topic on how to install 2010-2014 Chevrolet Orlando navigation system support E-Book Bluetooth DVD,we can view this front picture first to grasp a general idea about the appearance and some new functions of   new autoradio.

If we watch carefully,we can find that this car dvd dashboard has some difference with other ones:this stereo has two operations:one is touch screen which can be operated with a touch screen pen,the other one is push button controls,both ways can operated this unit.Though you are not owner of 2010-2014 Chevrolet Orlando,    there is no matter only if your radio dashboard is alike with above one.

So the next question comes to what steps will we follow about installing Chevrolet Orlando navigation gps radio,and it isn’t a work that need specialized technology but can be a normal work by ourselves,but under the condition that we have known clearly about its installation instructions.Next comes to main content of this essay.

2010-2014 Chevrolet Orlando factory radio removal:

1.Pry the upper vent housing panel from the dashuse gently with a panel removal tool

Pry the upper vent housing panel from the dashuse gently with a panel removal tool

Pry the upper vent housing panel from the dashuse gently with a panel removal tool

2.Prize the shifter surround trim panel,on manual transmission cars,release and replace the shifter

Prize the shifter surround trim panel,on manual transmission cars,release and replace the shifter

Prize the shifter surround trim panel,on manual transmission cars,release and replace the shifter

3.Take 2 screws out of storage pocket,then take storage out

Take 2 screws out of storage pocket

Take 2 screws out of storage pocket

take storage out

take storage out

4.Get 4 screws out of accessorv control panel

remove this screw and the other corresponding one

Get 4 screws out of accessorv control panel

Get 4 screws out of accessorv control panel

5.Pull off this panel,this panel was very tough to remove,be patient and the clips will get fasten and let panel hang to side

Pull off this panel

Pull off this panel

6.Take 2 screws out of the radio control panel,unplug control panel of radio

Take 2 screws out of the radio control panel

Take 2 screws out of the radio control panel

7.This is a really strange blue clip you must remove the blue clip completely before removing the real connector,and get out the other clip

before removing the real connector,remove the blue clip completely

before removing the real connector,remove the blue clip completely

8.Make 2 screws out of the radio chassis,and 2 screws near the top of the radio  to fasten the screen

Make 2 screws out of the radio chassis

Make 2 screws out of the radio chassis

9.Pulling screen out to remove it,disconnect behind clip

Pulling screen out to remove it

Pulling screen out to remove it

10.Take 2 more screws on stereo out

Take 2 more screws on stereo out

Take 2 more screws on stereo out

11.Make stereo and connectors out

Make stereo and connectors out

Make stereo and connectors out

Before we install new head unit,we can have a look at next video first:

2010-2014 Chevrolet Orlando aftermarket navigation system installation:

Original audio is removed,the next job is to install GPS radio navigation system,and you need to be more careful in next process.

Next what you need to do is to make cables connection between new unit and car.About this,I advise you to read instructions carefully which is within your bought radio and you can find answers from it.This is a key part of it,so you should be very careful when you are connecting cables and antennas.

After you have conneced all antennas,tidy them in order to save more spaced for new stereo for the space for them is very limited.After that,install your new radio gps into the car.

Turn on new radio and check whether it can work well.If it’s ok,it means that your work is right.Then you can firm those removed screws to their original places and reinstall storage,shifter,upper vents and housing panel back to right positions.Thus the whole procedure is finished and you will enjoy a good time during your driving.

If you still have some doubts on this dvd radio with nav system,they may be sloved by visiting the following website:http://www.seicane.com/in-dash-navigation-multimedia-player-for-2010-2014-chevrolet-orlando-with-pop-gps-3g-wifi-support-e-book-bluetooth-dvd-radio-20-disk-virtual-cd-changer-c155.

Attention:

Please keep well everything which are removed especially the screws for they are small but useful,they will be used again in your installation to fix the machine.If you can’t find a necessary thing,

that would be very distraught.

 

Posted in Chrysler. Tagged with , , .

How to remove 2011 2012 KIA K2 radio stereo sound system

DVD player after installation, gps radio with nav system bluetooth music of 2011 2012 KIA K2

DVD player after installation, gps radio with nav system bluetooth music of 2011 2012 KIA K2

Are you familiar with above image?Maybe you can recognize it because you went to shopping in car market and saw it before.You may want to install a new one at that time,but you are not clear which one to choose or don’t know how to remove 2011 2012 KIA K2 radio stereo sound system.

Don’t worry,I think this is why you come here and I will try to help you solve this kind of problem.A stereo as the picture show is one specially for 2011 2012 KIA K2,because the trim panel of it is same to factory one’s.And you know that one car can install not only one dvd,and one dvd can also be installed in some cars.

Therefore there’s no need to feel upset,you can choose a right one at last,now most cars have corresponding car stereos,and principles of removal and installation are generally same.Whatever whether this unit is suitable for your car,you can also have a patient look at following installation instructions for KIA K2 radio which will benefit you a lot.

And there are 2 tips for you before I show you removal steps to avoid unnecessary damage or any danger to car or even people.Don’t be afraid,it’s ok in normal condition.

Precautions before installation:

1.Please accomplish all parking series and turn off your radio before you start up any work

2.To ensure security please disconnect the negative battery cable

2011 2012 KIA K2 radio removal and installation:

1.Original head unit of KIA K2

Original head unit of KIA K2

Original head unit of KIA K2

2.Prize trim panel which is upper with a lever,and you may use your hand to prize it after it is fastened

Prize trim panel which is upper with a lever

Prize trim panel which is upper with a lever

after it is fastened,use your hand to prize it

after it is fastened,use your hand to prize it

3.After all parts can be removed,you can get it out totally

totally get upper trim panel out 

totally get upper trim panel out

4.Use a pry tool to lever dashboard surround it and then remove it by disconnecting cable

Use a pry tool to lever dashboard surround it

Use a pry tool to lever dashboard surround it

5.Take four screws out which firmed the radio with a screwdriver

take this screw out and the other corresponded three ones with a screwdriver

take this screw out and the other corresponded three ones with a screwdriver

6.Then you can easily take radio out and unplug all cables

take radio out

take radio out

7.Make cables connection between new radio and vehicle

Make cables connection between new radio and vehicle

Make cables connection between new radio and vehicle

8.Release rubber’s this part as the picture show

Release rubber's this part

Release rubber’s this part

9.Take screws out which lay on two sides and pry the lower position with a knife

Take screws out which lay on two sides

Take screws out which lay on two sides

pry the lower position with a knife

pry the lower position with a knife

10.After those two steel are removed,put cables in it

After those two steel are removed,put cables in it

After those two steel are removed,put cables in it

11.Make cables connection between new player and car system,fix screws to it,then put it well in

Make cables connection between new player and car system

Make cables connection between new player and car system

fix screws to new stereo

fix screws to new stereo

12.Reinstall trim panel  to its original place

After reading these 12 specific steps and do according it,you can turn on your installed dvd player and check whether your installation is all right.If you feel difficult to finish all these,you can get help from websites,for example:http://www.seicane.com/7-inch-2011-2012-kia-k2-touch-screen-gps-dvd-player-auto-a-v-radio-rds-bluetooth-music-wifi-rearview-camera-aux-dvr-steering-wheel-control-ipod-hd-1080p-c106.

Precautions after installation:

1.Please do not use strong chemicals, cleaners, strong detergent wash the machine,if you need to make a tidy,you can use a clean and dried cloth

2.Please use the touch screen pen to operate new radio, without using other sharp objects, or it will cause damage to screen

3.Please keep well the original cd player when the staff is dismounting the original CD for original screw’s once again use

Posted in Kia car DVD. Tagged with , , .

How to remove 2006-2011 Hyundai Elantra radio stereo audio system

New autoradio after installation,radio gps sat nav system of 2006-2011 Hyundai Elantra.

New autoradio after installation,radio gps sat nav system of 2006-2011 Hyundai Elantra

New autoradio after installation,radio gps sat nav system of 2006-2011 Hyundai Elantra

In modern society people are more likely to find more entertainments in daily busy life with faster and faster life rhythm,for we need to work hard for life but we need more learn to enjoy ourselves in daily life.A lot of people choose to buy a car because it’s very convenient when we are driving a car with a new radio.Do you have a Hyundai Elantra?Next I will show you details  about  how to remove 2006-2011 Hyundai Elantra radio stereo audio system.

Here are some tips for you that you should be careful about it,which can help you do a safer and better work.

Precautions before installation:

1.Please ensure that you have accomplished all parking affairs in order to make sure your safety

2.Before starting the removal process,please disconnect the negative battery cable

If you have interestes in it,then you can have a patient look at following installation guidance and wish you have a general idea about it.

2006-2011 Hyundai Elantra radio removal and installation:

1.Get trim panels out from each side of center console,you can do it with the help of a lever

Get trim panels out from each side of center console

Get trim panels out from each side of center console

2.Make out 4 screws  from trim panel

Make out 4 screws  from trim panel

Make out 4 screws from trim panel

3.Make ac vent controls out

Make ac vent controls out

Make ac vent controls out

4.Get 4 screwsout which secures radio chassis to sub dash

Get 4 screwsout which secures radio chassis to sub dash

Get 4 screwsout which secures radio chassis to sub dash

5.Take out the CD player

Take out the CD player

Take out the CD player

6.Disconnect cables behind radio

Disconnect cables behind radio

Disconnect cables behind radio

These 6 steps show us how to remove the original stereo,if you have finished smoothly,you may have a short rest and compare your removed CD radio with the one in the picture. It means that you can start to install Hyundai Elantra radio if they are same.

In fact this part is easier than front steps,you can take actions as following words:

Correctly connect the cables of new radio to cables of car,and you’d better do it after you are sure about how to make cables connection.After that,firm removed screws to fix the radio and place trim panels back to the dashboard.With all these done,you can turn on your installed autoradio and check whether all the functions can work or not.

What’s your work for car stereo replacement?If you have read it carefully,you will find that it’s not hard to remove the original stereo and replace a new one.

Of course,there will still meet some small problems for different cases.At that time,figuring out what the reason is or ask someone who knows better in this aspect for help,nothing will not be solved only if you have the desire to get it,especially when you have made enough preparations,for example,you can visit next website for detailed information and you can also contact dealers who works there:http://www.seicane.com/car-stereo-radio-upgrade-multimedia-dvd-navigation-for-hyundai-elantra-built-in-gps-bluetooth-aux-3g-wifi-auto-a-v-backup-camera-c036.

Attention please:

Easy doesn’t mean you can take it very easily,after all you are not professional,or it can a little dangerous.Please remember one tip that safety should be placed in front of anything,stop your job whenever you feel any danger.

It’s very normal for you to do some incorrect actions or didn’t attention something,so making adequate preparations for your Hyundai Elantra upgrade can be a very wise choice.

Posted in Hyundai car DVD. Tagged with , , .

How to upgrade 2010 Toyota Raze cd player with sound system

Can you recognize this image:dvd player aftermarket radio gps navigation bluetooth of 2010 Toyota Raze?

dvd player aftermarket radio gps navigation bluetooth of 2010 Toyota Raze

dvd player aftermarket radio gps navigation bluetooth of 2010 Toyota Raze

Some vehicle owners of Toyota Raze may have seen this stereo when you are shopping in the car market,you want to take one home but you have no idea how to install it in your car.Or in other words,you don’t know how to remove factory radio first.Doesn’t matter,here will show you 10 steps on how to upgrade 2010 Toyota Raze cd player with sound system.

It can be very easy to confirm information of cars like mode,size and years,but if is’s about the detailed steps to mount a car autoradio?Maybe very few people knows.

Before you upgrade your car’s head unit,you should ensure that the instructions for it are exactly right.General process can be like this:

first of all,choose one player that can be installed in your car.Next,trying to collect precise installation guide from the Internet,TV,magazine or other media routes.Chatting with workers who serves in this market and tell them what your doubt is about is one of ways that is normally used.So you may visit this website to get what you want by scanning and talking with them:http://www.seicane.com/8-inch-2010-toyota-raze-autoradio-gps-head-unit-3g-wifi-cd-dvd-player-dvr-bluetooth-music-tv-tuner-aux-steering-wheel-control-ipod-iphone-backup-camera-mp3-pop-c084.

If you would like to make your Toyota Raze cd player removal and dvd player installation more precise and safer, here are some suggestions about the installation and usage of the unit:

Precautions about the installation:

Please use touch screen pen to operate unit, do not use other objects include your fingers, if not it will cause damage to the screen;Don’t do self-service,maintenance or install the unit please when you have no experience or knowledge about it,in case of the power is on

2010 Toyota Raze cd player removal:

1.Before starting installation,remove the negative cable of battery

2.Release side panels with a panel removal tool from lower center console(beside shifter)

Release side panels with a panel removal tool from lower center console

Release side panels with a panel removal tool from lower center console

3.Remove the plastic piece which contains the shifter override with a small flat blade screwdriver

Remove the plastic piece which contains the shifter override with a small flat blade screwdriver

Remove the plastic piece which contains the shifter override with a small flat blade screwdriver

4.Insert special removal tool  into override move in gear, then take out shift benzal piece

Insert special removal tool  into override move in gear

Insert special removal tool into override move in gear

4.Make 2 screws out from sides of aux input panel unplug connectors

Make 2 screws out from sides of aux input panel unplug connectors

Make 2 screws out from sides of aux input panel unplug connectors

5.Take below small dashboard out

Take below small dashboard out

Take below small dashboard out

6.Release side panels from radio with a panel removal tool

Release side panels from radio with a panel removal tool

Release side panels from radio with a panel removal tool

7.Take air vent out and disconnect hazard switch

Take air vent out

Take air vent out

8.Remove 10mm hex head screws from factory stereo

Remove 10mm hex head screws from factory stereo

Remove 10mm hex head screws from factory stereo

9.Release the stereo,unplug connectors behind it and then remove it

Release the stereo,unplug connectors behind it and then remove it

Release the stereo,unplug connectors behind it and then remove it

2010 Toyota Raze dvd bluetooth installation:

10. connect all the cables correctly and install the dvd player in it

Connecting the wiring is a work that you should be more careful because it is more complex than other steps itself and there are much fine wires.If you are not very sure about it,I suggest you to do it according to corresponding instructions,check it again after you have finished it to avoid removal once again because you think it’s right and install new radio into it,but in fact it’s not.

After correct connection,you can install the radio and other part things to car and turn on it.If the unit can operate normally,then you have just finished installation yourself.

You can choose some websites to visit if you have interests in learning some other head units,may be next one can be a not bad choice:http://www.seicane.com.And I wrote another article which is about Toyota Verso gps,hope you can receive something that benefits you.

 

Posted in Toyota car DVD. Tagged with , .

Installation guide for 2011 2012 Toyota Avalon gps radio aftermarket sat nav system

I’d like to show you a picture at the beginning of this article:new unit after replacement,gps dvd autoradio aftermarket sat nav system of 2011 2012 Toyota Avalon.

new unit after replacement,gps dvd autoradio aftermarket sat nav system of 2011 2012 Toyota Avalon

new unit after replacement,gps dvd autoradio aftermarket sat nav system of 2011 2012 Toyota Avalon

This unit matches your car if it is one of 2011 2012 Toyota Avalon.To see the space after head unit removal is whether right for new unit is the only way to figure this question.After you are sure that this head unit is suitable for your car and decide to install a new one by yourself,then you are right to read this essay which will show you installation guide for 2011 2012 Toyota Avalon gps radio aftermarket sat nav system.

It also doesn’t matter if it seems to be improper for your car,because there are some places for stereo upgrade are common,it means that you can also learn a lot from the following description,and probably you can provide some advises to your friend.

Installing an aftermarket car stereo can be a self-done thing doesn’t mean that you can do it without taking care of anything.There are some notes for you before you begin any work.

Precautions before installation:

1.Please do not stop your car very suddenly,it may cause injury to driver and passengers

2.Before opening the hole from face plate in the dashboard panel,make sure that the rear space is enough.Be careful,do not damage the fuel cable,brake cable,electrical components,power lines or cable communications

3.When use the screws,please ensure that they are not contact with any electrification down-lead.Vibration may have damaged wire or insulation skin and lead to a short circuit or other damage to the vehicle

2011 2012 Toyota Avalon car stereo removal and installation:

1.Original CD radio

Original CD radio

Original CD radio

2.Get the gear shift panel  out

Get the gear shift panel  out

Get the gear shift panel out

3.Get screws out as the picture show

Get screws out

Get screws out

4.Take the lid of the surface out with a soft lever

Take the lid of the surface out with a soft lever

Take the lid of the surface out with a soft lever

5.Take two screws out as the image show

Take two screws out

Take two screws out

6.Remove factory  autoradio

Remove factory  autoradio

Remove factory autoradio

7.This is removed factory car radio looks like

removed factory car radio

removed factory car radio

Head unit removal is finished here,and next work is Toyota Avalon gps installation.Actually it can be easier if you can complete the  cable connection successfully.

Please be very careful when you are making connections on cables,for you should make sure that you have connected all wirings correctly.I recommend you to check it again if you are not very sure about it to avoid once stereo removal again.Then you can install the new unit into the space.

Turn on it and see whether the touch screen can work,then install other parts that were removed before to their original places.This is the whole installation process.

If you still have any doubts or problems that troubles you,you can visit some websites to solve them,such as http://www.seicane.com/8-inch-autoradio-dvd-car-audio-system-for-2011-2012-toyota-avalon-with-3d-gps-bluetooth-radio-rds-3g-wifi-tv-tuner-mp3-mp5-ipod-aux-hd-1080p-video-backup-camera-c270 ,

which can directly solve problems on this unit andhttp://www.seicane.com,where there are a lot of stereo there and you can have a general idea about car dvd.

 

Posted in Toyota car DVD. Tagged with , , .

How to remove 2001-2008 Mercedes W463 cd radio with audio system

Dear Mercedes car owner friends,will you catch up with recent trend like other people to update your car stereos?We can find that nowadays car is become normal in daily life and many owners are very serious to their cars.As car audio system,showing how to remove 2001-2008 Mercedes  W463 cd radio with audio system and made you clear is the main object of this article.

Some of you may feel confused at these words,ok,here is a picture for autoradio after installation,head unit gps radio aftermarket sat nav of 2001-2008 Mercedes  W463.And you can make a comparison between trim panel of this one with the one of yours.

autoradio after installation,head unit gps radio aftermarket sat nav of 2001-2008 Mercedes  W463

autoradio after installation,head unit gps radio aftermarket sat nav of 2001-2008 Mercedes W463

When you find that they are same,it demonstrates that this unit can be mounted in your car,otherwise it won’t.We also know that a car can install some machines,and a head unit of course can match some cars,except the special produced one.This one can be regarded as a normal one,so you needn’t to be too worry only if their trim panels are alike.

I can image the condition when you have finished your installation smoothly and can not wait to enjoy it.But are you familiar with it or do you have any experience before?If the answer is no,then you’d better to have a view at following video first,which will show you how to use new stereo:

You can start your work after you have grasped all these and read next CD radio removal and dvd radio installation guide.

2001-2008 Mercedes  W463 factory stereo removal:

1.Primary dashboard

original head unit

original head unit

2.Fasten the decoration panel with a lever and take out the cigarette lighter

Fasten the decoration panel with a lever and take out the cigarette lighter

Fasten the decoration panel with a lever and take out the cigarette lighter

3.Remove two screws under the 6-disc CD changer and take out the CD changer

Remove two screws under the 6-disc CD changer and take out the CD changer

Remove two screws under the 6-disc CD changer and take out the CD changer

4.Remove the two screws marked with red arrows and get out the CD player

Remove two screws under the 6-disc CD changer and take out the CD changer

Remove two screws under the 6-disc CD changer and take out the CD changer

5.Package for connected cables

Package for connected cables

Package for connected cables

6.Get out the baffle-plate under the assistant seat,connect the CAN-HCAN-L cable(green)③with the CAN-BUS socket market in the picture

Get out the baffle-plate under the assistant seat,connect the CAN-HCAN-L cable(green)③with the CAN-BUS socket market in the picture

Get out the baffle-plate under the assistant seat,connect the CAN-HCAN-L cable(green)③with the CAN-BUS socket market in the picture

7.Pry the decoration panel beside the driver’s seat, 5A to 10A’s change fuse

Pry the decoration panel beside the driver’s seat, 5A to 10A’s change fuse

Pry the decoration panel beside the driver’s seat, 5A to 10A’s change fuse

8.Move the screws out to fasten the car pc in the left of the trunk

Move the screws out to fasten the car pc in the left of the trunk

Move the screws out to fasten the car pc in the left of the trunk

9.Seek the amplifier in the left of the trunk and make out the four screws marked with red arrows

Seek the amplifier in the left of the trunk and make out the four screws marked with red arrows

Seek the amplifier in the left of the trunk and make out the four screws marked with red arrows

2001-2008 Mercedes  W463 aftermarket stereo installation:

10.Get out the amplifier of the car

Get out the amplifier of the car

Get out the amplifier of the car

11.Connect the speaker cable to the speaker socket②

Connect the speaker cable to the speaker socket②

Connect the speaker cable to the speaker socket②

Honestly,most of the removal process of Mercedes W463 cd radio is similiar in a large proportion,of course it will surely has some difference in different work,but don’t worry,this is normal and all problems can be solved only if you make adequate preparation before you start up your removal,such as read installation guide carefully and act as it say,or visit some related websites,for example:http://www.seicane.com/hot-oem-sat-nav-system-for-2001-2008-mercedes-benz-g-w463-with-radio-tuner-3g-wifi-bluetooth-cd-dvd-player-aux-dvr-1080p-mp3-ipod-c090-3,and you can also ask dealers of this market for help,they will try their best to help you.

Precautions after installation:

1.After you have mounted a new radio successfully,please do not be so excited that you stare at it or pay most attention on it when you are driving with it,that’s too dangerous

2.When you are driving on heavy rainy days,the moisture may gather on the head unit,you should pay attention to it for it will probably lead to unproper work

3.Please try to keep touch screen as clean as possible,do not sprinkle any liquid on the screen if you hope this new stereo can use longer time

If you are interested in more stereo installation,you can visit http://www.seicane.com for more information,and I also wrote an essay on

Mercedes W251 aftermarket sat nav installation,you can have a look if you have interests in it.

 

 

Posted in Mercedes Benz car DVD. Tagged with , , .

Installation guide for 2010 2011 2012 2013 Subaru Legacy dvd navigation with bluetooth music

car stereo autoradio after update,gps dvd with sat nav system touch screen of 2010 2011 2012 2013 Subaru Legacy

car stereo autoradio after update,gps dvd with sat nav system touch screen of 2010 2011 2012 2013 Subaru Legacy

You may have seen this head unit before when you are shopping in a car market.But you are confused which one to choose or you are not sure which one is suitable for your car.Don’t worry,I will tell you methods to make a decision for this next paragraph,and the point of this article is to show installation guide for 2010 2011 2012 2013 Subaru Legacy dvd navigation with bluetooth music.

Comparing your owned radio panel with this one,it can be installed in your car if they are in same size and appearance.It doesn’t mean whole dashboard,just panel which covers space for stereo.So it should be very possible that this unit is suitable for your car for it can be considered a normal radio,especially when you are the owner of Subaru Legacy.

Before telling about whole procedure about Subaru Legacy car dvd installation,there are some tips for you to attention.

Precautions before installation:

Firstly, if you have installation instructions from the dealer,please read it carefully

Secondly,you should turn off all affairs of car and make sure that you have finished parking series

Thirdly,please remember to disconnect negative connector to ensure your safety

With attentions on all of them,next we will learn how to remove original stereo and install Subaru Legacy dvd navigation.

2010 2011 2012 2013 Subaru Legacy CD radio removal:

1.Pull this handle out by unscrewing it

Pull this handle out by unscrewing it

Pull this handle out by unscrewing it

2.Pry trim panel with a tool as picture show to release it(but not to remove)

Pry trim panel with a tool as picture show to release it

Pry trim panel with a tool as picture show to release it

3.Remove panel surrounded it

Remove panel surrounded it

Remove panel surrounded it

4.Prize edges of outside trim panel and remove it,disconnect cable connected it

Prize edges of outside trim panel and remove it,disconnect cable connected it

Prize edges of outside trim panel and remove it,disconnect cable connected it

5.Use a screwdriver,remove 2 screws

Use a screwdriver,remove 2 screws

Use a screwdriver,remove 2 screws

6.After that,you can pull out two side trim panels

pull out two side trim panels

pull out two side trim panels

7.Remove 5 screws which is beside stereo,one side has 2 ,and the other side has 3,then you can remove original player and unplug cables beside it

Remove 5 screws which is beside stereo,one side has 2 ,and the other side has 3

Remove 5 screws which is beside stereo,one side has 2 ,and the other side has 3

remove original player and unplug cables beside it

remove original player and unplug cables beside it

8.Remove surface panel of CD  from the unit,but before it you should remove screws on original unit first

Remove surface panel of CD  from the unit

Remove surface panel of CD from the unit

2010 2011 2012 2013 Subaru Legacy new radio installation:

Before starting mount of gps radio,we can have a look at following video first and it will give us intuitive things including how to operate new features:

9.Do connections on cables and antennas as following pictures show

Do connections on cables and antennas

Do connections on cables and antennas

Do connections on cables and antennas2

Do connections on cables and antennas2

Do connections on cables and antennas3

Do connections on cables and antennas3

10.After connection,mount trim panel on radio and leave one cable outside panel

mount trim panel on radio and leave one cable outside panel

mount trim panel on radio and leave one cable outside panel

11.Make round red connector connected  to upper right side of the panel

Make round red connector connected  to upper right side of the panel

Make round red connector connected to upper right side of the panel

12.Connect outside cable with  new radio

Connect outside cable with  new radio

Connect outside cable with new radio

13.Install new unit into right position

Install new unit into right position

Install new unit into right position

14.Firm removed screws and install panels to their primary places

Firm removed screws and install panels to their primary places

Firm removed screws and install panels to their primary places

You will surely accomplish this installation for Subaru Legacy dvd navigation only if you can do it as mount instructions say,everything needs guidance when we have no experience on it,so it is.If there still occur some problems,then you should think about whether some of your operation to car head unit is wrong or you forget to keep something back.You can also ask someone who works in this market for help. Visit a website and there will be someone to help you solve your problems is a not bad choice,for example:http://www.seicane.com/car-bluetooth-radio-upgrade-sat-nav-system-specialized-for-subaru-legacy-built-in-dvr-3-zone-pop-fm-am-hd-radio-tuner-with-gps-dvd-3g-wifi-c061-1,it will give you more details about new radio too.

I have written an article which is about upgrade of Subaru Outback radio,if you also have doubts about it you can go to visit it and may get what you want.

 

Posted in Subaru car DVD. Tagged with , , .

How to remove 2009 2010 2011 Jeep Compass CD radio with audio system

Do you have a car of 2009 2010 2011 Jeep Compass?Nowadays many car owners are seeking out an answer for how to remove 2009 2010 2011 Jeep Compass CD radio with audio system for self installation.It is a fact that many people have installed new head unit for their cars smoothly,it shows that radio removal and installation is not a very trouble thing.

When you are not satisfied with factory stereo,you may go to the market and buy one to upgrade the CD radio.But after you have entered a shop with various kinds of stereos,you feel confused and have no idea to choose one.Don’t worry,I think you can have a look at following picture first:head unit after installation,car stereo autoradio with gps navigation bluetooth of 2009 2010 2011 Jeep Compass.Then I will show you how to choose a suitable one with your car.

head unit after installation,car stereo autoradio with gps navigation bluetooth of 2009 2010 2011 Jeep Compass

head unit after installation,car stereo autoradio with gps navigation bluetooth of 2009 2010 2011 Jeep Compass

The key point to know whether this unit can be installed in your car is to compare panel of the players.If the space after your CD player is removed is just for a new one,then that one is what you need.And this essay is still worth to read though this stereo in the picture is not right for you,because you can take it as references.

Before you really start removal for Jeep Compass CD radio,you can view next video first.It’s about usage for new features of the radio,which will bring you a roughly understanding of it.

With a better understanding of bluetooth dvd,many people can’t wait to upgrade their car stereos.Ok,the following part will show you how to achieve this object.

2009 2010 2011 Jeep Compass autoradio removal and installation:

1.The original car stereo of Jeep Compass

the original car stereo of Jeep Compass

the original car stereo of Jeep Compass

2.Use a lever,pry the edges around trim panel to release it

use a lever,pry the edges around trim panel to release it

use a lever,pry the edges around trim panel to release it

3.Take trim panel out,unplug antennas behind it

take trim panel out,unplug antennas behind it

take trim panel out,unplug antennas behind it

4.Use a screw removal tool,remove 4 screws,2 screws on each side

use a screw removal tool,remove 4 screws

use a screw removal tool,remove 4 screws

5.Gently remove factory radio and disconnect cables behind it

gently remove factory radio and disconnect cables behind it

gently remove factory radio and disconnect cables behind it

Removing factory stereo is finished with above 6 steps,and you will find that it’s simple to do it when you have prepared removal tools and do it as right guide.And there are still about 3 steps to accomplish it.

6.Connect and plug all wires step by step as following pictures show

plug antennas,cables and connectors1

plug antennas,cables and connectors1

plug antennas,cables and connectors2

plug antennas,cables and connectors2

plug antennas,cables and connectors3

plug antennas,cables and connectors3

7.Then put new unit into right space,and you’d better have a tidy for the wires because the space is limited

put new unit into right space

put new unit into right space

8.After you have mounted new stereo in the space,then firm 4 screws to the place beside dvd player and cover trim panel on the surface of car radio.

With all these done,you can turn on your new autoradio and watch the screen,it demonstrates that your installation is all right if it can work out.You can start your car with it and have a full experience on its new screen and functions.But if not,I guess there is something wrong during your connection or you left some objects that is necessary.

At this kind of time,at first you can comfirm that whether your bought head unit is all right.Secondly,if there is nothing wrong with the unit then I advise you to check cables connection again.Once one of them is not right,it will lead to stereo’s out of work.Therefore when you are doing this,you should be very careful and you’d better check again after connection to avoid removing Jeep Compass CD radio and installing gps radio once again.

Some people may say they don’t know the new unit very well,and need more specific information about it.Ok,you can visit the following website for help:http://www.seicane.com/2009-2010-2011-jeep-compass-sat-nav-radio-replacement-dvd-tv-bluetooth-music-pop-aux-backup-camera-hd-1080p-video-ipod-usb-sd-c202,and it will provide you very clear details.

 

 

Posted in Jeep car DVD. Tagged with , , .

How to mount 2006-2010 OPEL Zafira bluetooth radio with aftermarket navigation system

If you are a careful man,you may find a fact that more and more people have upgraded radio system of the car.It means that many people are seeking for more entertainments in daily life,for example cars.But why and how to mount 2006-2010 OPEL Zafira bluetooth radio with aftermarket navigation system?

It doesn’t matter if you are a owner of other cars,because many modern stereo can probably be mounted in several cars.With rapid development of technology, electronic products is upgrading with a surprising speed.Just like car stereo,its surface appearance and functions have been designed more advanced and beneficial.

There is an image for this head unit after installation,bluetooth dvd with aftermarket sat nav and 3G wifi of 2006-2010 OPEL Zafira.

head unit after installation,bluetooth dvd with aftermarket sat nav and 3G wifi of 2006-2010 OPEL Zafira

head unit after installation,bluetooth dvd with aftermarket sat nav and 3G wifi of 2006-2010 OPEL Zafira

If you find that your radio panel is the same with this one,it shows that this unit is suitable for your car and can be mounted in without difficulty.Ok,you may can not wait to learn mount process,here are you wants and you may find removing part is really very simple

It’s normal to find little difference in the following process,you can take it as a reference on autoradio installation.

2006-2010 OPEL Zafira factory stereo removal

1.If you watch very closely,you will find four small holes on the unit,insert two removal tools into the holes

insert two removal tools into the holes

insert two removal tools into the holes

2.Bend two tools a little and pull out the stereo at the same time

bend two tools a little and pull out the stereo at the same time

bend two tools a little and pull out the stereo at the same time

3.Unplug cables between them

unplug cables between them

unplug cables between them

4.Remove a screw and put wires in inner place

remove a screw and put wires in inner place

remove a screw and put wires in inner place

5.Use a pry tool,lever top of the trim panel,release and remove it

use a pry tool,lever top of the trim panel,release and remove it

use a pry tool,lever top of the trim panel,release and remove it

6.When you take the panel out,you will find a lot of cables are also taken out.Then you connect antennas like this:

connect antennas and interfaces1

connect antennas and interfaces1

connect antennas and interfaces2

connect antennas and interfaces2

7.Use a screwdriver pull out the side panel a little,then remove lower side panel in front of file

use a screwdriver pull out the side panel a little

use a screwdriver pull out the side panel a little

remove lower side panel in front of file

remove lower side panel in front of file

8.Insert long red line down through the side fasten panel and up through removed panel in front of file,firm the side panel

insert long red line down through the side fasten panel and up through removed panel in front of file

insert long red line down through the side fasten panel and up through removed panel in front of file

2006-2010 OPEL Zafira factory stereo installation

9.Make wiring as the picture show,tidy all of them into the space

make wiring as the picture show

make wiring as the picture show

10.Connect long red cable to right place

connect long red cable to right place

connect long red cable to right place

11.Connect it with removed small panel in front of file and cover it

connect it with removed small panel in front of file and cover it

connect it with removed small panel in front of file and cover it

12.Adapters connection between new unit and the car

adapters connection1

adapters connection1

adapters connection2

adapters connection2

13.Then connect the two outside cables to back of new unit,install new radio into it,and cover removed panel on the dvd player

Thus all operations for original stereo removal and OPEL Zafira bluetooth installation is all here.We can see that removing is very simple,but when we want to mount it,it become complex.Therefore,you should read this part slowly and carefully or search some helpful instructions from the Internet.

Of course,you can ask someone who are professional to help you,that may be quicker but you can also do it by yourself with right installation guide.

Precautions after installation:

1.Please don’t be too excited after you succeed fulfilling the job or you may cause some damage to car or even yourself.

2.To make sure the head unit can be used longer,do not use any chemicals to wash it or sprinkle any liquid on it

3.Please don’t pay much attention to the dvd especially when you are driving on a rapid road

For more information about aftermarket navigation of OPEL Zafira,visiting this website may be helpful:http://www.seicane.com/aftermarket-oem-gps-in-dash-car-dvd-for-opel-zafira-with-touch-screen-radio-bluetooth-3-zone-advanced-pop-built-in-20-disk-virtual-cd-changer-3g-wifi-c019.

Posted in Opel car DVD. Tagged with , , .

Installation guide for 2012 Nissan Patrol dvd player aftermarket oem gps

car stereo dvd gps navigation of 2012 Nissan Patrol

car stereo dvd gps navigation of 2012 Nissan Patrol

You may have bought this above autoradio but haven’t installed it into your car because you don’t know the installation guide for 2012 Nissan Patrol dvd player aftermarket oem gps.We can find that installing a car dvd is not very difficult,you can absolutely do it by yourself.

Before we talk about how to install this head unit,we can collect information of it as much as possible,for example,you can scan the next website for messages:http://www.seicane.com/radio-replacement-aftermarket-oem-gps-car-a-v-system-for-2012-nissan-patrol-with-3g-wifi-dvr-bluetooth-music-dvd-recoding-function-support-c154.

You can find many specific things like key features,radio module and so on.Some of the functions are exist before,and it just have upgraded better.And it of course increases new ones,such as navigation system which is very popular within drivers,and bluetooth 3G wifi.

Maybe the advanced functions and good-looking appearance are main reasons people choose them and install them.Then next we will continue the key topic:removal guide for Nissan Patrol dvd player.Please be patient to read it and then try your job.

There may be some difference on panel appearance,but it doesn’t matter because the key point is the aftermarket stereo can be installed in your car,that’s the most important.

2012 Nissan Patrol car stereo removal:

1.The original car stereo

the original car stereo

the original car stereo

2.Use a lever,gently pry top trim panel and remove it,you can put it on the right side

use a lever,gently pry top trim panel and remove it

use a lever,gently pry top trim panel and remove it

3.Remove the screw with a screwdriver,then we come to below part

remove the screw with a screwdriver

remove the screw with a screwdriver

4.Unclip the lowest panel,then pry higher bigger panel with a lever

unclip the lowest panel,then pry higher bigger panel with a lever

unclip the lowest panel,then pry higher bigger panel with a lever

5.Remove this whole panel,lay it conversely on your legs

remove this whole panel

remove this whole panel

6.Remove 2 screws with a screwdriver,and 2 screws under them

remove 2 screws with a screwdriver

remove 2 screws with a screwdriver

and 2 screws under them

and 2 screws under them

7.Take out factory stereo,turn it over and unplug the right one as the picture show and remove the other two with a removal tool

unplug the right one as the picture show

unplug the right one as the picture show

remove the other two with a removal tool

remove the other two with a removal tool

You see,the CD player of the car is removed,there are some tips for you during this process:

Removal precautions:

1.please be gentle and careful to the panels to avoid any damage

2.put screws on safe and available places after you have got them down,for you will use them to firm stereo and other systems at later time

3.check whether your new bought stereo can be installed in after you have removed original one,if not,you may need to change another one

2012 Nissan Patrol dvd gps installation:

Next comes to the mount operations,it’s easier actually.At first,you should know how to connect the adapters by reading instructions carefully and act according to it.After that,tweak screws on the unit to firm it to right place,lid removed trim panels back to primary positions.

After you have finished all this,turn on the radio and check it.If doesn’t,you need to figure out the reason and try again.But still mind that keeping you safe is only the most important.And you can ask someone who are professional to give you a hand.

Posted in Nissan car DVD. Tagged with , , .